Interlaminar fracture analysis in the G I – G II – G III space using prestressed transparent composite beams
Source abstract
Abstract
This work presents the mixed mode I/II/III prestressed split-cantilever beam specimen for the fracture testing of composite materials. The newly designed system is the superposition of the mode-I double-cantilever beam, mode-II end-loaded split, and mode-III modified split-cantilever beam specimens. The three fracture modes are combined by prestressing the mode-I and mode-II energy release rates at the same time, while the mode-III loading is provided by a testing machine. It is shown that the system is able to provide any combinations of the mode-I, mode-II, and mode-III energy release rates. The applicability and the limitations of the novel fracture mechanical test are demonstrated using unidirectional glass/polyester composite specimens. The experimental data is reduced by the virtual crack-closure technique. It is shown that the energy release rates are non-uniformly distributed along the crack front which involves that the model results must be evaluated pointwise, and initiation was expected at the point where the highest total energy release rate appeared. Finally, based on the present and previous results, a three-dimensional fracture surface was determined in the G I – G II – G III space.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Ultrasonics and Acoustic Wave Propagation · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Applied Mechanics, Budapest University of Technology and Economics, Budapest, Hungary.
References (43)
Show source-provided references
1. 10.1016/j.engfracmech.2004.08.00210.1016/j.engfracmech.2004.08.002 ↗
2. 10.1016/j.engfracmech.2007.03.01210.1016/j.engfracmech.2007.03.012 ↗
3. 10.1201/978142005821510.1201/9781420058215 ↗
4. 10.2514/6.1984-96110.2514/6.1984-961 ↗
5. 10.1016/S0263-8223(03)00209-510.1016/S0263-8223(03)00209-5 ↗
6. 10.1016/0266-3538(88)90088-710.1016/0266-3538(88)90088-7 ↗
7. 10.1016/0266-3538(88)90022-X10.1016/0266-3538(88)90022-X ↗
8. 10.1002/pc.1051610.1002/pc.10516 ↗
9. 10.1023/A:101602523210210.1023/A:1016025232102 ↗
10. 10.1520/CTR10369J10.1520/CTR10369J ↗
11. 10.1016/0266-3538(96)00009-710.1016/0266-3538(96)00009-7 ↗
12. 10.1016/S0266-3538(98)00141-910.1016/S0266-3538(98)00141-9 ↗
13. Ratcliffe JG · NASA/Technical Memorandum · 2004 · 213
14. 10.1177/002199830707869010.1177/0021998307078690 ↗
15. 10.1016/j.compscitech.2008.12.01910.1016/j.compscitech.2008.12.019 ↗
16. 10.1016/j.engfracmech.2008.10.00410.1016/j.engfracmech.2008.10.004 ↗
17. Adams DF · 2003
18. 10.1016/0266-3538(94)90207-010.1016/0266-3538(94)90207-0 ↗
19. Cicci D, Sharif F and Kortschot MT. Data reduction for the split cantilever beam mode III delamination test. In: Proceedings, ACCM 10 , Whistler, British Columbia, Canada, 14–18 August, 1995.
20. Sharif F, Kortschot MT and Martin RH. Mode III Delamination Using a Split Cantilever Beam. In: Martin RH, Composite materials: fatigue and fracture . 5th Vol. ASTM STP 1230, 1995 ed. Philadelphia: ASTM, 85–99.10.1520/STP14009S ↗
21. Trakas K and Kortschot MT. The relationship between critical strain energy release rate and fracture mode in multidirectional carbon-fiber/epoxy laminates. In: Armanios EA (ed.) Composite materials: fatigue and fracture . 6th Vol. ASTM STP 1285, 1997, ASTM, 283–304.10.1520/STP19933S ↗
22. 10.1007/s10443-006-9008-910.1007/s10443-006-9008-9 ↗
23. 10.1016/S0013-7944(98)00020-410.1016/S0013-7944(98)00020-4 ↗
24. 10.1016/S0378-5173(01)00783-910.1016/S0378-5173(01)00783-9 ↗
25. 10.1016/j.engfracmech.2005.06.00810.1016/j.engfracmech.2005.06.008 ↗
26. 10.1016/j.compositesa.2009.08.00910.1016/j.compositesa.2009.08.009 ↗
27. 10.1016/j.ijmecsci.2009.07.00510.1016/j.ijmecsci.2009.07.005 ↗
28. 10.1016/j.compositesa.2010.10.01310.1016/j.compositesa.2010.10.013 ↗
29. 10.1016/j.compositesa.2011.01.01810.1016/j.compositesa.2011.01.018 ↗
30. 10.1016/j.ijsolstr.2006.09.02910.1016/j.ijsolstr.2006.09.029 ↗
31. 10.1016/j.compositesa.2009.02.00310.1016/j.compositesa.2009.02.003 ↗
32. 10.1016/j.compscitech.2008.02.02310.1016/j.compscitech.2008.02.023 ↗
33. 10.1016/j.compositesa.2009.07.00910.1016/j.compositesa.2009.07.009 ↗
34. 10.1163/092430410X50414310.1163/092430410X504143 ↗
35. Szekrényes A · Compos Appl Sci Manuf · 2011
36. 10.2514/3.2520410.2514/3.25204 ↗
37. 10.1177/002199831037609710.1177/0021998310376097 ↗
38. 10.1177/073168441038014810.1177/0731684410380148 ↗
39. 10.1016/j.msea.2009.03.01110.1016/j.msea.2009.03.011 ↗
40. 10.1016/j.compscitech.2003.10.00810.1016/j.compscitech.2003.10.008 ↗
41. 10.1016/j.compstruct.2009.07.01710.1016/j.compstruct.2009.07.017 ↗
42. 10.1016/0266-3538(90)90013-U10.1016/0266-3538(90)90013-U ↗
43. 10.1177/00219983900240090210.1177/002199839002400902 ↗