journal article·2011-07

Influence of calcium carbonate on RTM and RTM light processing and properties of molded composites

André C. Garay, Vicente Heck, Ademir J. Zattera, Jeferson A. Souza, Sandro C. Amico

Publisher page

Abstract

In the RTM light composite manufacturing process, inorganic fillers are commonly added to the resin to reduce cost and alter the final composite properties, especially rigidity, even though they also adversely affect processability. The aim of this study is to evaluate resin characteristics, reinforcement permeability, and mechanical properties of the composite and analyze the detrimental effects when a variable amount of calcium carbonate (CaCO 3 ) is added to the resin. The addition of calcium carbonate increased the viscosity and gel time of the resin and considerably decreased the permeability of the reinforcement and therefore the expected process productivity. Besides, Barcol hardness, short-beam strength, and elastic modulus increased for higher CaCO 3 content, whereas Izod impact, flexural, and tensile strengths decreased. Besides, the coarser CaCO 3 filler particles managed to penetrate only partially into the fiber-rich layer of the combination mat used, which comprised of a PP flow media core and glass fibers at the surface.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

PPGEM, Federal University of Rio Grande do Sul (UFRGS), Porto Alegre/RS, Brazil.

Exact Sciences and Technology Center (CCET), Caxias do Sul University (UCS), Caxias do Sul/RS, Brazil.

School of Engineering, Federal University of Rio Grande (FURG), Av. Itália, Campus Carreiros, Rio Grande/RS, Brazil.

References (21)

Show source-provided references
1. 10.1016/j.compositesa.2003.02.00110.1016/j.compositesa.2003.02.001 ↗
2. 10.1016/j.compscitech.2007.04.01010.1016/j.compscitech.2007.04.010 ↗
3. Bréard J, Guillygomarc’h Y, De Luca P and Morisot O. Numerical modeling of liquid composite molding processes for large-size composite parts. In: Proceedings of the International SAMPE Symposium and Exhibition , Long Beach, May 2005, Vol. 50, pp. 53–67.
4. 10.1016/j.compositesa.2005.01.01910.1016/j.compositesa.2005.01.019 ↗
5. Maclaren O, Gan JM, Hickey CMD, Bickerton S and Kelly PA. The RTM-light manufacturing process: experimentation and modelling. In: Proceedings of the 17th International Conference on Composite Materials , Edinburgh, UK, July 2009, pp. 1–10.
6. 10.1016/j.compositesa.2005.06.00310.1016/j.compositesa.2005.06.003 ↗
7. Lawrence J, Simacek P and Advani S. New advances in modeling and simulation of liquid composite molding processes. In: Proceedings of the International SAMPE Symposium and Exhibition . Long Beach, USA, April, 2006, pp. 1–12.
8. 10.1002/pc.1043010.1002/pc.10430 ↗
9. 10.1177/073168440605545510.1177/0731684406055455 ↗
10. 10.1111/j.1151-2916.1999.tb02034.x10.1111/j.1151-2916.1999.tb02034.x ↗
11. 10.1016/j.compositesa.2007.06.00910.1016/j.compositesa.2007.06.009 ↗
12. 10.1002/pc.1036510.1002/pc.10365 ↗
13. 10.1177/073168440809397410.1177/0731684408093974 ↗
14. 10.1016/S1359-835X(01)00049-510.1016/S1359-835X(01)00049-5 ↗
15. 10.1016/S0032-5910(02)00274-710.1016/S0032-5910(02)00274-7 ↗
16. 10.1023/A:102579940403810.1023/A:1025799404038 ↗
17. 10.1016/j.polymdegradstab.2008.03.03210.1016/j.polymdegradstab.2008.03.032 ↗
18. 10.1016/j.msea.2009.06.02010.1016/j.msea.2009.06.020 ↗
19. 10.1007/978-94-011-1324-310.1007/978-94-011-1324-3 ↗
20. 10.1016/j.tca.2008.01.01510.1016/j.tca.2008.01.015 ↗
21. 10.1006/jcis.2000.678710.1006/jcis.2000.6787 ↗