Organoclay Filled Natural Rubber Nanocomposites: The Effects of Filler Loading and Mixing Method
Source abstract
Abstract
Organoclay filled natural rubber (NR) nanocomposites were prepared by the incorporation of different loadings (0—10 phr) of organoclay fillers. NR nanocomposites were prepared using two different mixing methods, namely mechanical and solution mixing methods. Results indicate that the scorch time and cure time decrease with increasing filler loading, whereas the maximum torque exhibits an increasing trend. Increasing organoclay loading also increases the tensile modulus and elongation at break, but the tensile strength reaches maximum at 4 phr of organoclay. The intercalation and exfoliation structure affects the properties of organoclay filled NR nanocomposites as shown by evidence from X-Ray Diffraction (XRD) and transmission electron microscopy studies. Organoclay filled NR nanocomposites prepared by solution mixing exhibit better properties than similar NR nanocomposites prepared by mechanical mixing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia,
School of Materials & Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia
References (27)
Show source-provided references
1. Okada, A. · Sci. Eng. · 1995 · 3 · 109
2. 10.1002/adma.1993005060310.1002/adma.19930050603 ↗
3. 10.1002/adma.1996008010410.1002/adma.19960080104 ↗
4. Vaia, R.A. · Macromolecules · 1995 · 28 · 808010.1021/ma00128a016 ↗
5. 10.1557/JMR.1993.117910.1557/JMR.1993.1179 ↗
6. 10.1557/JMR.1993.118510.1557/JMR.1993.1185 ↗
7. 10.1002/app.1085810.1002/app.10858 ↗
8. Le Baron, P.C. · Appl. Clay Sci. · 1999 · 15 · 1110.1016/S0169-1317(99)00017-4 ↗
9. 10.1002/polb.1010110.1002/polb.10101 ↗
10. 10.1002/1099-0488(20010215)39:4<446::AID-POLB1017>3.0.CO;2-810.1002/1099-0488(20010215)39:4<446::AID-POLB1017>3.0.CO;2-8 ↗
11. Wu, Z. · Test. · 2002 · 21 · 479
12. 10.1016/S0032-3861(03)00480-410.1016/S0032-3861(03)00480-4 ↗
13. 10.1016/S0032-3861(00)00346-310.1016/S0032-3861(00)00346-3 ↗
14. 10.1021/cm00046a02610.1021/cm00046a026 ↗
15. 10.1021/cm00040a02210.1021/cm00040a022 ↗
16. 10.1016/S0032-3861(00)00642-X10.1016/S0032-3861(00)00642-X ↗
17. 10.1002/(SICI)1097-4628(19971128)66:9<1781::AID-APP17>3.0.CO;2-Y10.1002/(SICI)1097-4628(19971128)66:9<1781::AID-APP17>3.0.CO;2-Y ↗
18. Nah, C. · Int. · 2001 · 50 · 1265
19. Chang, Y.W. · Int. · 2002 · 51 · 319
20. 10.1016/S0032-3861(02)00013-710.1016/S0032-3861(02)00013-7 ↗
21. 10.1002/1097-4628(20001209)78:11<1873::AID-APP40>3.0.CO;2-810.1002/1097-4628(20001209)78:11<1873::AID-APP40>3.0.CO;2-8 ↗
22. 10.1002/pol.1961.120501540410.1002/pol.1961.1205015404 ↗
23. Ismail, H. · Test. · 1998 · 17 · 199
24. Ismail, H. · J. · 1998 · 34 · 1857
25. 10.1016/j.eurpolymj.2004.06.02510.1016/j.eurpolymj.2004.06.025 ↗
26. 10.1016/S0032-3861(03)00358-610.1016/S0032-3861(03)00358-6 ↗
27. 10.1080/0360255060094888910.1080/03602550600948889 ↗