Cure Characterization of Pultruded Soy-based Composites
Source abstract
Abstract
Polymer matrix composites using renewable resources are currently of great interest. A novel soy-based resin system for pultrusion was synthesized at University of Missouri-Rolla (UMR). Due to relatively low reactivity of soy-based resin and short curing time of pultrusion, it is important to set up the process parameters properly in order to obtain a high quality pultruded product. In the present work, a combination of experimental and numerical methods is used to investigate the effect of pultrusion process variables on the cure of composites. A mathematical model has been developed and implemented in the commercial ABAQUS finite element package to predict the temperature and degree of cure of soy-based composites. The kinetic parameters of the soy-based epoxy resins are obtained from a differential scanning calorimeter (DSC). Glass fiber-reinforced composite samples are manufactured using a pultrusion machine. For experimental verification, an online monitoring system is used to measure the temperature profiles inside the die. The degrees of cure of pultruded soy-based composites are measured by DSC. The experimental findings are in good agreement with the finite element prediction. The results indicate that the novel soy-based epoxy resin system is suitable for application in the pultrusion process.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Natural Fiber Reinforced Composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Aerospace Engineering, Center for Environmental Science and Technology, University of Missouri-Rolla, Rolla, Missouri 65409, USA
Department of Mechanical and Aerospace Engineering, Center for Environmental Science and Technology, University of Missouri-Rolla, Rolla, Missouri 65409, USA,
Department of Chemistry, Center for Environmental Science and Technology, University of Missouri-Rolla, Rolla, Missouri 65409, USA
References (19)
Show source-provided references
1. 10.1002/(SICI)1097-4628(19970613)64:11<2073::AID-APP3>3.0.CO;2-G10.1002/(SICI)1097-4628(19970613)64:11<2073::AID-APP3>3.0.CO;2-G ↗
2. 10.1023/A:102658340489910.1023/A:1026583404899 ↗
3. Lu, R. B. · Polymer Preprints · 2000 · 41 · 1340
4. Price, H. L. (1979). Curing and Flow of Thermosetting Material Pultrusion, PhD Dissertation, Old Dominion University, Virginia.
5. Aylward, L. D. · Polymer Process Engineering · 1985 · 3 · 247
6. 10.1002/pen.76026060410.1002/pen.760260604 ↗
7. Walsh, S. M. · 23
8. 10.1002/adv.1990.06010040210.1002/adv.1990.060100402 ↗
9. Wu, H. T. · SAMPE Journal · 1990 · 26 · 59
10. 10.1177/07316844920110120110.1177/073168449201101201 ↗
11. 10.1002/aic.69039071310.1002/aic.690390713 ↗
12. Ruan, Y. · Journal of Materials Processing & Manufacturing Science · 1994 · 3 · 91
13. 10.1177/07316844960150030510.1177/073168449601500305 ↗
14. 10.1002/(SICI)1098-2329(199711)16:4<297::AID-ADV4>3.0.CO;2-Q10.1002/(SICI)1098-2329(199711)16:4<297::AID-ADV4>3.0.CO;2-Q ↗
15. 10.1002/app.1357110.1002/app.13571 ↗
16. 10.1016/j.compositesa.2003.08.00710.1016/j.compositesa.2003.08.007 ↗
17. 10.1177/00219983820160060510.1177/002199838201600605 ↗
18. Flynn, J. H. · Journal of Thermal Analysis · 1988 · 37 · 29310.1007/BF02055932 ↗
19. ABAQUS 6.3 Manual, Hibbitt, Karlsson & Sorensen, Inc.