journal article·2015-09

Effect of basic design parameters on IC debonding of CFRP-strengthened shallow RC beams

Mohammed A Al-Saawani, Ahmed K El-Sayed, Abdulaziz I Al-Negheimish

Publisher page

Abstract

Bonding of fiber-reinforced polymer (FRP) plates to the tension face is an effective technique for strengthening reinforced concrete (RC) beams. However, an important design issue is the sudden and premature failure by intermediate crack (IC) debonding of the externally bonded FRP plates from the concrete surface of the strengthened beams. The objective of this paper is to examine the effect of basic design parameters on the IC debonding of the FRP-strengthened RC beams and to assess the accuracy of prediction models of IC debonding in international codes and guidelines. A total of 13 RC beams were constructed and tested for this purpose. The test variables include steel reinforcement ratio, compressive strength of concrete, depth of the beam, and the width of the FRP reinforcement. None of the test variables caused a change in the IC debonding failure mode, except for the strengthened beam with FRP area covering its full width. Among studied variables, only the compressive strength of concrete had a significant effect on the debonding strain of the FRP plates. The results of this experimental work were compared with IC debonding prediction models—currently in effect—of international codes and guidelines. Among these codes, ACI 440.2R-08 and the Italian guide CNR DT200 showed the most accurate and consistent prediction of the IC debonding strain.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center of Excellence for Concrete Research and Testing (CoE-CRT), Civil Engineering Department, King Saud University, Riyadh, Kingdom of Saudi Arabia

References (34)

Show source-provided references
1. 10.1016/j.engstruct.2006.11.02210.1016/j.engstruct.2006.11.022 ↗
2. 10.1061/(ASCE)1090-0268(2007)11:1(62)10.1061/(ASCE)1090-0268(2007)11:1(62) ↗
3. 10.1016/j.compositesb.2007.05.00210.1016/j.compositesb.2007.05.002 ↗
4. 10.1016/0950-0618(95)00071-210.1016/0950-0618(95)00071-2 ↗
5. 10.1061/(ASCE)1090-0268(1998)2:3(138)10.1061/(ASCE)1090-0268(1998)2:3(138) ↗
6. 10.1016/S0950-0618(03)00043-610.1016/S0950-0618(03)00043-6 ↗
7. 10.1061/(ASCE)0733-9445(1990)116:4(978)10.1061/(ASCE)0733-9445(1990)116:4(978) ↗
8. 10.1061/(ASCE)1090-0268(2001)5:2(122)10.1061/(ASCE)1090-0268(2001)5:2(122) ↗
9. 10.1016/j.compositesb.2008.07.00410.1016/j.compositesb.2008.07.004 ↗
10. 10.1061/(ASCE)CC.1943-5614.000027410.1061/(ASCE)CC.1943-5614.0000274 ↗
11. 10.1016/j.compositesb.2011.11.01510.1016/j.compositesb.2011.11.015 ↗
12. 10.1177/073168441142720910.1177/0731684411427209 ↗
13. 10.1177/073168441039469910.1177/0731684410394699 ↗
14. Malek AM · ACI Struct J · 1998 · 95 · 142
15. 10.1016/S0141-0296(00)00090-010.1016/S0141-0296(00)00090-0 ↗
16. 10.1061/(ASCE)0733-9399(2002)128:1(78)10.1061/(ASCE)0733-9399(2002)128:1(78) ↗
17. 10.1061/(ASCE)1090-0268(2007)11:2(175)10.1061/(ASCE)1090-0268(2007)11:2(175) ↗
18. Shahawy M · ACI Struct J · 2001 · 98 · 735
19. Bencardino F · ACI Struct J · 2002 · 99 · 163
20. 10.1260/13694330577435310610.1260/136943305774353106 ↗
21. Rosenboom O · ACI Struct J · 2008 · 105 · 41
22. 10.1016/j.compositesb.2007.10.00610.1016/j.compositesb.2007.10.006 ↗
23. 10.1177/073168441142359610.1177/0731684411423596 ↗
24. 10.1177/073168441246408810.1177/0731684412464088 ↗
25. 10.1061/(ASCE)0733-9445(2001)127:7(792)10.1061/(ASCE)0733-9445(2001)127:7(792) ↗
26. ACI Committee 440.2R. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI 440.2R-08 . Farmington Hills, MI: American Concrete Institute, 2008.
27. Fédération Internationale du Béton. Externally bonded FRP reinforcement for RC structures. fib Bulletin 14 2001; Task Group 9.3 FRP Reinforcement for concrete structures, Lausanne, Switzerland.
28. CNR-National Council for Research. Guide for the design and construction of externally bonded FRP systems for strengthening existing structures-materials, RC and PC structures, masonry structures . Rome, Italy, 2004.
29. Ye LP, Lu XZ and Chen JF. Design proposals for the debonding strength of FRP strengthened RC beams in the Chinese design code. Proceedings of the International Symposium on Bond Behavior of FRP in Structures , Hong Kong, China, 2005.
30. JSCE · Concrete Engineering Series · 2001 · 41 · 31
31. Teng JG, Chen JF, Smith ST, FRP-strengthened RC structures, Chichester, West Sussex, UK: John Wiley and Sons, 2002, pp. 245–245.
32. Teng JG, Lu XZ, Ye LP, et al. Recent research on intermediate crack induced debonding in FRP strengthened beams. In: Proceedings of the 4th international conference on advanced composite materials for bridges and structures , Calgary, AB, Canada, 2004.
33. Lu XZ. Studies of FRP-concrete interface . PhD Thesis, Tsinghua University, Beijing, China, 2004.
34. Lu XZ, Ye LP, Teng JG, et al. Recent research on interfacial behavior of FRP sheets externally bonded to RC structures. In: Proceedings of the 2nd International Conference on FRP Composites in Civil Engineering , Adelaide, Australia 2004, pp. 389–398.10.1201/9780203970850.ch42 ↗