Review on process model, structure-property relationship of composites and future needs in fused filament fabrication
Source abstract
Abstract
This paper presents the state-of-the-art of additive manufacturing of composites for processing functional, load-bearing components. A general overview of different additive manufacturing methods is provided, and specific attention is focused on fused filament fabrication-based composites processing. Different process modeling strategies are summarized, and key aspects of these models are discussed. Significant results such as thermal and fluid flow characteristics, effects of nozzle geometry on melt flow, fiber orientation, bead spreading, and solidification, the formation of residual stresses, and deformation behavior are discussed from computational modeling perspective. The scientific advancement, model limitations, and future modeling needs are prescribed reviewing the current works. A general overview of material development in nano-micro-macro-scale reinforcement is also presented. Different length-scales of reinforcement has its own challenges and promises. The continuous fiber reinforcement has a great potential for being the next-generation composites manufacturing technology. However, the challenges in reducing the void content, better bonding between the fiber–matrix, and layer-layer adhesion, and process uncertainty are some of the key areas yet to advance. Based on the current limitations on computational modeling, materials development, and process modeling studies, future research needs and recommendations are provided.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Innovations in Concrete and Construction Materials · Interactive and Immersive Displays
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Advanced Composite Materials Laboratory, Department of Aerospace Engineering and Mechanics, The University of Alabama, Tuscaloosa, USA
References (100+)
Show source-provided references
1. Hull CW. Apparatus for production of three-dimensional objects by stereolithography. Google Patents, 1986.
2. Sachs EM, Haggerty JS, Cima MJ, et al. Three-dimensional printing techniques. Google Patents, 1993.
3. 10.1108/1355254001030986810.1108/13552540010309868 ↗
4. 10.1179/1743280411Y.000000001410.1179/1743280411Y.0000000014 ↗
5. Crump SS. Apparatus and method for creating three-dimensional objects. Google Patents, 1992.
6. 10.1002/mame.20160055310.1002/mame.201600553 ↗
7. 10.1108/RPJ-12-2011-012710.1108/RPJ-12-2011-0127 ↗
8. 10.1016/j.compositesb.2015.06.01310.1016/j.compositesb.2015.06.013 ↗
9. Wohlers Report 2018. 3D printing and additive manufacturing state of the industry: annual worldwide progress report . USA: Wohlers Associates, 2018.
10. ASTM I · 2015
11. van de Werken N · Addit Manuf · 2019 · 31 · 100962
12. 10.1016/j.polymertesting.2010.10.01110.1016/j.polymertesting.2010.10.011 ↗
13. Jansson A · Addit Manuf · 2016 · 9 · 7
14. 10.1016/j.apsusc.2017.09.22610.1016/j.apsusc.2017.09.226 ↗
15. 10.1016/j.compscitech.2018.06.02310.1016/j.compscitech.2018.06.023 ↗
16. 10.1002/adem.20180062210.1002/adem.201800622 ↗
17. Ansys. www.ansys.com/products/structures/additive-manufacturing (accessed 1 June 2020).
18. e-Xstream engineering. www.e-xstream.com/page/additive-manufacturing (accessed 1 June 2020).
19. Simulia. www.3ds.com/products-services/simulia/trends/digital-additive-manufacturing/ (accessed 1 June 2020).
20. Love LJ. Utility of big area additive manufacturing (BAAM) for the rapid manufacture of customized electric vehicles. TN, USA: Oak Ridge, 2015.10.2172/1209199 ↗
21. DeNardo NM. Additive manufacturing of carbon fiber-reinforced thermoplastic composites. Theses and Dissertations, Purdue University, USA. 2016.
22. LSAM. www.thermwood.com/lsam_home.htm (accessed 1 June 2020).
23. Business Journal Daily. https://businessjournaldaily.com/strangepresse-partners-with-baylor-university/ (accessed 1 June 2020).
24. 10.1016/j.compositesb.2016.11.03410.1016/j.compositesb.2016.11.034 ↗
25. 10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
26. 10.1016/j.compstruct.2017.08.08810.1016/j.compstruct.2017.08.088 ↗
27. 10.1002/admt.20180027110.1002/admt.201800271 ↗
28. 10.1177/073168441769564810.1177/0731684417695648 ↗
29. 10.1016/j.polymertesting.2018.05.02010.1016/j.polymertesting.2018.05.020 ↗
30. 10.1080/17452759.2016.127449010.1080/17452759.2016.1274490 ↗
31. 10.1016/j.addma.2018.01.00210.1016/j.addma.2018.01.002 ↗
32. 10.1108/RPJ-01-2013-001210.1108/RPJ-01-2013-0012 ↗
33. 10.1007/s10856-007-3203-610.1007/s10856-007-3203-6 ↗
34. 10.1016/j.addma.2016.06.00510.1016/j.addma.2016.06.005 ↗
35. 10.1177/00219983910250090710.1177/002199839102500907 ↗
36. Duty CE, Ajinjeru C, Kishore V, et al. A viscoelastic model for evaluating extrusion-based print conditions . Oak Ridge National Lab (ORNL), TN, USA: Oak Ridge, 2017.
37. 10.1007/s00170-017-1340-810.1007/s00170-017-1340-8 ↗
38. Watanabe N, Shofner M, Treat N, et al. A model for residual stress and part warpage prediction in material extrusion with application to polypropylene. In: 2016 annual international solid freeform fabrication symposium , Austin, 2016.
39. 10.1016/j.addma.2017.11.00210.1016/j.addma.2017.11.002 ↗
40. 10.1088/0957-4484/27/49/49530210.1088/0957-4484/27/49/495302 ↗
41. 10.1016/j.ceramint.2017.06.01210.1016/j.ceramint.2017.06.012 ↗
42. Yardmci A. Process analysis and development for fused deposition . PhD Thesis, University of Illinois at Chicago, Chicago, 1999.
43. Rodriguez MJ. Modeling the mechanical behavior of fused deposition acrylonitrile-butadiene-styrene polymer components. Doctoral Dissertation, University of Notre Dame, USA, 1999.
44. Bellini A. Fused deposition of ceramics: a comprehensive experimental, analytical and computational study of material behavior, fabrication process and equipment design . 2002.
45. Watanable N. Computational and experimental investigation of reinforced polymers for material extrusion additive manufacturing. Masters Thesis, Georgia Institute of Technology , USA, 2016.
46. 10.1016/S1007-0214(09)70063-X10.1016/S1007-0214(09)70063-X ↗
47. Stewart SR, Wentz JE, Allison JT. Experimental and Computational Fluid Dynamic Analysis of Melt Flow Behavior in Fused Deposition Modelling of Poly (lactic) Acid. In: ASME 2015 International Mechanical Engineering Congress and Exposition . American Society of Mechanical Engineers, 2015.10.1115/IMECE2015-52261 ↗
48. Papon EA, Haque A, Sharif MAR. Effect of nozzle geometry on melt flow simulation and structural property of thermoplastic nanocomposites in fused deposition modeling . In: Proceeding of the American society for composites, Thirty-second technical conference , 2017.10.12783/asc2017/15339 ↗
49. 10.1038/s41598-018-22107-010.1038/s41598-018-22107-0 ↗
50. Osswald TA · Addit Manuf · 2018 · 22 · 51
51. Nixon J, Dryer B, Lempert I, et al. Three parameter analysis of fiber orientation in fused deposition modeling geometries. In: Proceedings of PPS conference , Las Vegas, Nevada, USA, 28–30 April 2014.
52. Garcia A. Nozzle geometry effects on exit orientation of short fiber composites. Kansas: Wichita State University, 2017.
53. 10.1177/07316844840030020110.1177/073168448400300201 ↗
54. 10.1122/1.54994510.1122/1.549945 ↗
55. 10.3390/jcs201001010.3390/jcs2010010 ↗
56. 10.1016/j.compositesb.2019.10728410.1016/j.compositesb.2019.107284 ↗
57. 10.1038/srep4340110.1038/srep43401 ↗
58. 10.1063/1.504708810.1063/1.5047088 ↗
59. Yang D · J Manuf Mater Process · 2017 · 1 · 10
60. 10.1016/j.addma.2018.10.03110.1016/j.addma.2018.10.031 ↗
61. 10.1108/RPJ-12-2015-018310.1108/RPJ-12-2015-0183 ↗
62. 10.1016/j.compscitech.2014.10.00910.1016/j.compscitech.2014.10.009 ↗
63. 10.3390/jcs203004510.3390/jcs2030045 ↗
64. 10.3390/jcs202002610.3390/jcs2020026 ↗
65. Furlani EP · Inf Electron Microsysts TechConnect Brief · 2018 · 118
66. 10.1016/j.polymertesting.2018.11.02510.1016/j.polymertesting.2018.11.025 ↗
67. 10.1108/RPJ-12-2016-021710.1108/RPJ-12-2016-0217 ↗
68. 10.1016/j.addma.2017.12.01310.1016/j.addma.2017.12.013 ↗
69. 10.1016/j.addma.2018.09.02210.1016/j.addma.2018.09.022 ↗
70. Serdeczny MP, Comminal R, Pedersen DB, et al. Numerical prediction of the porosity of parts fabricated with fused deposition modeling. In: 29th annual international solid freeform fabrication symposium (SFF Symp 2018) , Austin, United States, 2018.
71. Comminal R, Serdeczny M, Pedersen D, et al. Laboratory for freeform fabrication. In: 29th Annual international solid freeform fabrication symposium (SFF Symp 2018) , Austin, Texas, USA, 13–15 August 2018.
72. Balani SB · Addit Manuf · 2019 · 25 · 112
73. 10.1063/1.503499510.1063/1.5034995 ↗
74. 10.1142/S021987621844002410.1142/S0219876218440024 ↗
75. Atif Yardimci M, Hattori T, Guceri SI, et al. Thermal analysis of fused deposition. Int Solid Freeform Fabrication Symposium . 1997.
76. Brenken B, Favaloro A, Barocio E, et al. Development of a model to predict temperature history and crystallization behavior of 3D printed parts made from fiber-reinforced thermoplastic polymers. In: SAMPE conference, Long Beach, CA , 2016.
77. Zhou Y, Nyberg T, Xiong G, et al. Temperature analysis in the fused deposition modeling process. In: 2016 3rd international conference on information science and control engineering (ICISCE) , IEEE, 2016.10.1109/ICISCE.2016.150 ↗
78. Pooladvand K · Mech Compos Multifunct Mater · 2017 · 7 · 45
79. 10.1016/j.cma.2018.11.03110.1016/j.cma.2018.11.031 ↗
80. 10.1016/S0377-0257(03)00114-910.1016/S0377-0257(03)00114-9 ↗
81. Compton BG · Addit Manuf · 2017 · 17 · 77
82. Talagani M · SAMPE J · 2015 · 27
83. Favaloro AJ, Brenken B, Barocio E, et al. Simulation of polymeric composites additive manufacturing using Abaqus. In: Proceedings of the Dassault Systemes’ Science in the Age of Experience, Chicago, IL, 15–18 May 2017.
84. Spinnie NK. Large scale fused deposition modeling: the effect of process parameters on bead geometry. PhD Thesis, Virginia Tech, 2016.
85. 10.1016/S1526-6125(04)70071-710.1016/S1526-6125(04)70071-7 ↗
86. Sun Q. Bond formation between polymer filaments in fused deposition modeling process . Calgary: University of Calgary, 2005.
87. Shahriar BB, France C, Valerie N, et al. Toward improvement of the properties of parts manufactured by FFF (fused filament fabrication) through understanding the influence of temperature and rheological behaviour on the coalescence phenomenon. AIP Conf Proc 2017; 1896: 040008.10.1063/1.5008034 ↗
88. 10.1108/1355254081086202810.1108/13552540810862028 ↗
89. 10.1080/17452759.2014.91340010.1080/17452759.2014.913400 ↗
90. 10.1007/s12289-008-0312-910.1007/s12289-008-0312-9 ↗
91. 10.1016/j.jmatprotec.2017.02.02610.1016/j.jmatprotec.2017.02.026 ↗
92. McIlroy C · Addit Manuf · 2018 · 24 · 323
93. 10.1016/j.polymer.2017.06.05110.1016/j.polymer.2017.06.051 ↗
94. 10.1122/1.497683910.1122/1.4976839 ↗
95. Barocio E, Brenken B, Favaloro A, et al. Fusion bonding simulations of semi-crystalline polymer composites in the extrusion deposition additive manufacturing process. In: Proceedings of the American Society for Composites—Thirty-second Technical Conference , West Lafayette, IN, USA, 23–25 October 2017.10.12783/asc2017/15395 ↗
96. 10.1108/1355254121127204510.1108/13552541211272045 ↗
97. 10.1016/j.apmt.2017.04.00310.1016/j.apmt.2017.04.003 ↗
98. 10.1108/RPJ-03-2016-003310.1108/RPJ-03-2016-0033 ↗
99. 10.3390/ma809527110.3390/ma8095271 ↗
100. 10.1007/s00170-006-0556-910.1007/s00170-006-0556-9 ↗