Effect of surface treatment on the morphology of sisal fibers in sisal/polylactic acid composites
Source abstract
Abstract
Sisal fibers were pretreated by alkali and alkylation, and then mixed with polylactic acid to make sisal fiber-reinforced polylactic acid composites, respectively. The architecture and aspect ratio of sisal fibers before and after mixing, the micro-morphology of fracture surface, and the properties of composites were investigated. The results showed that surface treatment greatly impacted the fiber fracture behavior. Shearing fracture occurred to the untreated sisal fibers and alkali-treated sisal fibers, which led to a sharp reduction in the length of the fiber, while the shear-tear facture occurred to the alkylation-treated sisal fibers and resulted in obvious decrease in both length and diameter of alkylation-treated sisal fibers. The fiber aspect ratio of sisal fibers was affected first by the pretreatment method, then by the processing temperature, and the sisal fiber content. Furthermore, the mechanical properties of reinforcing fibers and sisal fiber-reinforced polylactic acid composites were influenced fundamentally by the pretreatment method.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Engineering Research Center of Novel Equipment for Polymer Processing, South China University of Technology, Guangzhou, China
The Key Laboratory of Polymer Processing Engineering, South China University of Technology, Ministry of Education, Guangzhou, China
References (22)
Show source-provided references
1. 10.1016/j.compositesa.2003.09.01510.1016/j.compositesa.2003.09.015 ↗
2. 10.1177/07316840177267863410.1177/073168401772678634 ↗
3. 10.1023/A:102654642676410.1023/A:1026546426764 ↗
4. Sanadi AR · Plast Eng · 1994 · 50 · 27
5. 10.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-010.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-0 ↗
6. Mapleston P · Mod Plast · 1999 · 76 · 73
7. Broge JL. Natural fibers in automotive components. Automot Eng Int 2000; 120.
8. Gates M · Adv Mater Processes · 2001 · 159 · 12
9. 10.1016/S1359-835X(00)00098-110.1016/S1359-835X(00)00098-1 ↗
10. 10.1023/A:102101392191610.1023/A:1021013921916 ↗
11. 10.1016/S0266-3538(03)00100-310.1016/S0266-3538(03)00100-3 ↗
12. 10.1016/S0266-3538(03)00103-910.1016/S0266-3538(03)00103-9 ↗
13. 10.1002/mame.20029003110.1002/mame.200290031 ↗
14. 10.1016/S0266-3538(03)00099-X10.1016/S0266-3538(03)00099-X ↗
15. Anonym · Bioplastics · 2006 · 1 · 18
16. 10.1016/j.compscitech.2005.10.01510.1016/j.compscitech.2005.10.015 ↗
17. 10.1007/978-3-662-03680-810.1007/978-3-662-03680-8 ↗
18. 10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W ↗
19. 10.1163/15685540175325542210.1163/156855401753255422 ↗
20. 10.1016/S0266-3538(99)00024-X10.1016/S0266-3538(99)00024-X ↗
21. Jingwu Z · J Tianjin Univ · 1994 · 20 · 616
22. 10.1163/15685540878381084910.1163/156855408783810849 ↗