Properties and performance of flax yarn/thermoplastic polyester composites
Source abstract
Abstract
Aiming at demonstrating the potential of unidirectional natural fiber-reinforced thermoplastic composites in structural applications, textile flax yarn/thermoplastic polyester composites with variable fiber volume fractions have been manufactured by a filament-winding process followed by a vacuum-assisted compression molding process. The microstructure of the composites shows that the flax fiber yarns are well impregnated by the polyester matrix, and this supports the measured low porosity content of the composites. The experimental tensile modulus and ultimate tensile stress of the composites in the axial and transverse directions are well simulated by rule of mixtures models. In the axial direction, at a fiber volume fraction of 0.50, the experimental tensile modulus and ultimate tensile stress are 32 GPa and 350 MPa, respectively. In comparison, for glass fiber composites at a fiber volume fraction of 0.50, the tensile modulus and ultimate tensile stress are calculated to be 38 GPa and 1800 MPa, respectively. The flax yarn composites show better specific tensile modulus than the glass fiber composites with values of 23 GPa/g/cm 3 and 20 GPa/g/cm 3 , respectively. An analysis of data from previous studies of unidirectional natural fibre composites demonstrates comparatively good reinforcement efficiency of the flax yarn fibers with an effective tensile modulus and ultimate tensile stress of the fibers in the area of 70 GPa and 800 MPa, respectively. Altogether, it is demonstrated that composites with high-quality textile flax yarn are well suited for structural applications when stiffness and weight saving are the central selection criteria.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Textile materials and evaluations · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Engineering, Swansea University, Swansea, UK 2Materials Research Division, Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, Roskilde, Denmark
References (29)
Show source-provided references
1. 10.1023/A:101492562125210.1023/A:1014925621252 ↗
2. Pratten NA. The precise measurement of the density of small samples. J Mater Sci 1981; 16: 1737–1747.10.1007/BF00540619 ↗
3. Andersen TL. Development of a rapid press consolidation technique for continuous fiber reinforced thermoplastic composites. In: Proceedings of the 18th Risoe international symposium on materials science , Risoe National Laboratory, Roskilde, Denmark, 1–5 September 1997, pp.237–244.
4. American society of testing and materials. Annual book of ASTM standards. Part 35. D792. Specific gravity and density of plastics by displacement , 1980.
5. Madsen B. Properties of plant fiber yarn polymer composites . PhD Thesis, Technical University of Denmark, 2004.
6. 10.1016/j.compositesa.2007.06.00110.1016/j.compositesa.2007.06.001 ↗
7. 10.1016/j.indcrop.2004.03.00110.1016/j.indcrop.2004.03.001 ↗
8. Hänninen T, Thygesen A, Mehmood S, et al. Mechanical processing of bast fibres: the occurrence of damage and its effect on fibre structure. Ind Crop Prod 2012; 39: 7–11.10.1016/j.indcrop.2012.01.025 ↗
9. 10.1080/15440478.2011.60223610.1080/15440478.2011.602236 ↗
10. Hughes M. Defects in natural fibres: their origin, characteristics and implications for natural fibre-reinforced composites. J Mater Sci 2012; 47: 599–609.10.1007/s10853-011-6025-3 ↗
11. 10.1007/s10853-011-5581-x10.1007/s10853-011-5581-x ↗
12. 10.1016/j.compscitech.2009.01.01610.1016/j.compscitech.2009.01.016 ↗
13. 10.1016/j.compositesa.2007.06.00210.1016/j.compositesa.2007.06.002 ↗
14. 10.1016/S0266-3538(02)00011-810.1016/S0266-3538(02)00011-8 ↗
15. Page DH · Tappi · 1977 · 60 · 114
16. 10.1023/A:100478493187510.1023/A:1004784931875 ↗
17. 10.1016/S0266-3538(01)00046-X10.1016/S0266-3538(01)00046-X ↗
18. Sridhar MK · Indian J Technol · 1984 · 22 · 213
19. 10.1016/S1359-835X(00)00098-110.1016/S1359-835X(00)00098-1 ↗
20. 10.1007/BF0110654510.1007/BF01106545 ↗
21. 10.1016/0015-0568(81)90030-010.1016/0015-0568(81)90030-0 ↗
22. 10.1002/app.1047510.1002/app.10475 ↗
23. Madsen B · J Nanostruct Polym Nanocompos · 2009 · 4 · 139
24. Kumar P · Indian J Technol · 1986 · 24 · 29
25. 10.1007/BF0055239310.1007/BF00552393 ↗
26. 10.1016/S0266-3538(03)00093-910.1016/S0266-3538(03)00093-9 ↗
27. 10.1016/S0266-3538(03)00097-610.1016/S0266-3538(03)00097-6 ↗
28. Thygesen A, Thomsen AB, Daniel G, et al. Comparison of composites made from fungal defibrated hemp with composites of traditional hemp yarn. Ind Crop Prod 2007; 25: 147–159.10.1016/j.indcrop.2006.08.002 ↗
29. 10.1177/07316840177267863410.1177/073168401772678634 ↗