journal article·2021-05

Factors affecting hole quality during drilling of natural fiber-reinforced composites: A comprehensive review

Muhammad Helmi Abdul Kudus, Mani Maran Ratnam, Hazizan Md. Akil

Publisher page

Abstract

In recent years, with greater emphasis on environmental and sustainability aspects of engineering materials, natural fiber-reinforced polymer composites (NFRPCs) have gained significance in practical applications because of their numerous advantages. Although many researchers have developed NFRPCs using various types of natural fibers and matrix materials, in real-world applications of NFRPCs, secondary operations, such as milling and drilling, are necessary to complete the components or parts assembly. Because the drilling of NFRPCs is different from drilling of metals, there are concentration of studies interested in the aspects of drillability of NFRPCs in order to assess and understand issues related to drilled hole quality in NFRPCs. In this paper, a comprehensive review of factors that affect the drilled hole quality in NFRPCs is presented. Past researches where correlation between the manufacturing methods of NFRPCs and drillability of the composites are reported are reviewed in-depth. The novelty of this review is that it identifies the major factors that affect the quality of the drilled features from a composite manufacturing perspective and provides recommendations for the best NFRPCs manufacturing process to produce drill-friendly composites. The major factors were classified into composite manufacturing factors and drilling parameters factors.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Advanced machining processes and optimization · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, Nibong Tebal, Penang, Malaysia

School of Materials and Minerals Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Nibong Tebal, Penang, Malaysia

Funding

Universiti Sains Malaysia

References (77)

Show source-provided references
1. 10.18517/ijaseit.7.1.118010.18517/ijaseit.7.1.1180 ↗
2. Raj SSR Dhas JER Jesuthanam C. Challenges on machining characteristics of natural fiber-reinforced composites – a review. J Reinf Plast Comp 2020; 0731684420940773.
3. Srinivas K, Naidu AL and Raju Bahubalendruni M. A review on chemical and mechanical properties of natural fiber reinforced polymer composites. Int J Performability Eng 2017; 13: 189–200.
4. 10.1007/s13369-015-2005-210.1007/s13369-015-2005-2 ↗
5. 10.1177/20412479170080020310.1177/204124791700800203 ↗
6. 10.1016/j.ejpe.2017.11.00510.1016/j.ejpe.2017.11.005 ↗
7. 10.1088/1757-899X/368/1/01201210.1088/1757-899X/368/1/012012 ↗
8. 10.1016/j.jclepro.2018.02.25710.1016/j.jclepro.2018.02.257 ↗
9. Karikalan L, Chandrasekran M, Ramasubramanian S, et al. Hybridization of composites using natural and synthetic fibers for automotive application. Int J Sci Res Sci Technol 2017; 7: 916–920.
10. Kim YK, Chalivendra V. Natural fibre composites (NFCs) for construction and automotive industries. Handbook of natural fibres. Amsterdam, the Netherlands: Elsevier, 2020, pp.469–498.
11. 10.1016/B978-0-08-102426-3.00011-410.1016/B978-0-08-102426-3.00011-4 ↗
12. Asim M, Saba N, Jawaid M, et al. Potential of natural fiber/biomass filler-reinforced polymer composites in aerospace applications. Sustainable composites for aerospace applications. Amsterdam, the Netherlands: Elsevier, 2018, pp.253–268.
13. 10.1007/978-3-319-72697-7_310.1007/978-3-319-72697-7_3 ↗
14. 10.1016/j.compositesb.2014.08.03210.1016/j.compositesb.2014.08.032 ↗
15. 10.1016/j.jclepro.2017.10.10110.1016/j.jclepro.2017.10.101 ↗
16. 10.1177/073168441875676210.1177/0731684418756762 ↗
17. 10.1016/j.compositesb.2017.10.03810.1016/j.compositesb.2017.10.038 ↗
18. 10.15282/jmes.5.2013.9.006010.15282/jmes.5.2013.9.0060 ↗
19. 10.1177/073168440708737910.1177/0731684407087379 ↗
20. 10.1007/s00170-016-9010-910.1007/s00170-016-9010-9 ↗
21. 10.1177/089270571879654110.1177/0892705718796541 ↗
22. Lotfi A Li H Dao DV et al. Natural fiber–reinforced composites: a review on material manufacturing and machinability. J Thermoplast Compos Mater 2019; 0892705719844546.10.1177/0892705719844546 ↗
23. 10.1177/089270571557509410.1177/0892705715575094 ↗
24. 10.1016/j.compstruct.2018.07.10510.1016/j.compstruct.2018.07.105 ↗
25. 10.1016/j.proeng.2013.08.24910.1016/j.proeng.2013.08.249 ↗
26. 10.3390/ma705380210.3390/ma7053802 ↗
27. Lotfi A Li H Dao DV. Effect of drilling parameters on delamination and hole quality in drilling flax fiber reinforced bio-composites. In International conference on sustainable design and manufacturing. Cham Switzerland: Springer 2018 pp.71–81.10.1007/978-3-030-04290-5_8 ↗
28. 10.1108/WJE-03-2020-008010.1108/WJE-03-2020-0080 ↗
29. Patel K Chaudhary V Gohil PP et al. Investigation on drilling of banana fibre reinforced composites. In: 2nd International conference on civil materials and environmental sciences. Amsterdam the Netherlands: Atlantis Press 2015 pp. 201–205.10.2991/cmes-15.2015.58 ↗
30. 10.1007/s12206-018-0409-010.1007/s12206-018-0409-0 ↗
31. 10.1016/j.cirpj.2014.11.00210.1016/j.cirpj.2014.11.002 ↗
32. 10.1088/1757-899X/197/1/01205610.1088/1757-899X/197/1/012056 ↗
33. 10.1016/j.wear.2014.12.03910.1016/j.wear.2014.12.039 ↗
34. 10.1016/j.jmrt.2014.10.00310.1016/j.jmrt.2014.10.003 ↗
35. 10.1080/1042691090344726110.1080/10426910903447261 ↗
36. 10.1007/s11740-011-0297-y10.1007/s11740-011-0297-y ↗
37. 10.1016/j.precisioneng.2016.07.01110.1016/j.precisioneng.2016.07.011 ↗
38. 10.1177/073168441454861210.1177/0731684414548612 ↗
39. 10.3103/S106345761305001810.3103/S1063457613050018 ↗
40. 10.1080/10426914.2014.94187010.1080/10426914.2014.941870 ↗
41. 10.1016/j.compositesb.2005.04.00110.1016/j.compositesb.2005.04.001 ↗
42. 10.1177/002199831772000910.1177/0021998317720009 ↗
43. Gupta MK, Gond R. Influence of concentrations of alkali treatment on mechanical and dynamic mechanical properties of hemp/polyester composite. Am J Polym Sci Eng 2017; 5: 24–33.
44. 10.1080/1023666X.2018.150193110.1080/1023666X.2018.1501931 ↗
45. 10.1177/073168441771838510.1177/0731684417718385 ↗
46. 10.1002/pc.2085310.1002/pc.20853 ↗
47. 10.1016/j.matpr.2017.02.15810.1016/j.matpr.2017.02.158 ↗
48. Gupta M, Srivastava R. Tribological and dynamic mechanical analysis of epoxy based hybrid sisal/jute composite. Indian J Eng Mater Sci 2016; 23: 37–44.
49. 10.3390/polym1012131610.3390/polym10121316 ↗
50. 10.35940/ijrte.C4693.09831910.35940/ijrte.C4693.098319 ↗
51. 10.1177/073168441561845910.1177/0731684415618459 ↗
52. Laurenzi S Marchetti M. Advanced composite materials by resin transfer molding for aerospace applications. In: Hu N (ed) Composites and their properties. London: IntechOpen Ltd. 2012 pp.197–226.10.5772/48172 ↗
53. 10.1515/hf-2014-005410.1515/hf-2014-0054 ↗
54. 10.1016/j.indcrop.2017.12.01410.1016/j.indcrop.2017.12.014 ↗
55. 10.1016/j.mtcomm.2020.10100810.1016/j.mtcomm.2020.101008 ↗
56. 10.1007/s00170-020-04968-w10.1007/s00170-020-04968-w ↗
57. 10.1016/j.compscitech.2006.08.01010.1016/j.compscitech.2006.08.010 ↗
58. Ragunath S, Velmurugan C, Kannan T. A review of influential parameters in drilling delamination on fiber reinforced polymer composites. Int J ChemTech Res 2017; 10: 298–303.
59. 10.1007/s00170-017-0153-010.1007/s00170-017-0153-0 ↗
60. Chandramohan D, Marimuthu K. Drilling of natural fiber particle reinforced polymer composite material. Int J Adv Eng Res Stud 2011; 1: 134–145.
61. 10.1177/073168441349532210.1177/0731684413495322 ↗
62. 10.1016/j.ijmachtools.2004.09.01210.1016/j.ijmachtools.2004.09.012 ↗
63. 10.1007/s00170-010-3030-710.1007/s00170-010-3030-7 ↗
64. 10.1177/073168441348684710.1177/0731684413486847 ↗
65. 10.1007/s12034-011-0359-y10.1007/s12034-011-0359-y ↗
66. 10.1007/s00170-010-2605-710.1007/s00170-010-2605-7 ↗
67. 10.1016/j.mspro.2014.07.51310.1016/j.mspro.2014.07.513 ↗
68. Ramesh M Palanikumar K Reddy KH. Experimental investigation and analysis of machining characteristics in drilling hybrid glass-sisal-jute fiber reinforced polymer composites. In: 5th international & 26th all India manufacturing technology design and research conference AIMTDR Assam India 12–14 December 2014.
69. Abilash N, Sivapragash M. Optimizing the delamination failure in bamboo fiber reinforced polyester composite. J King Saud Univ-Eng Sci 2016; 28: 92–102.10.1016/j.jksues.2013.09.004 ↗
70. 10.1177/073168441349286610.1177/0731684413492866 ↗
71. 10.1016/j.jmapro.2018.05.03210.1016/j.jmapro.2018.05.032 ↗
72. 10.1016/j.wear.2009.01.03110.1016/j.wear.2009.01.031 ↗
73. 10.1016/j.jmatprotec.2006.03.11410.1016/j.jmatprotec.2006.03.114 ↗
74. 10.1016/j.wear.2017.11.01510.1016/j.wear.2017.11.015 ↗
75. 10.1177/073168441770935910.1177/0731684417709359 ↗
76. 10.1016/j.cirp.2011.03.07710.1016/j.cirp.2011.03.077 ↗
77. 10.1016/j.surfcoat.2015.06.08310.1016/j.surfcoat.2015.06.083 ↗