journal article·2002-10

Mechanical and Thermal Properties of ABS-CaCO3 Composites

C. Y. Tang, L. C. Chan, J. Z. Liang, K. W. E. Cheng, T. L. Wong

Publisher page

Abstract

The tensile, impact and bending properties of calcium carbonate (CaCO 3 ) filled acrylonitrile-butadiene-styrene copolymer (ABS) composites were measured at room temperature. It was found that the tensile modulus increased nonlinearly with increasing the weight fraction φ + of the fillers, and the tensile strength and tensile fracture stress decreased gently with the increase of. The Charpy notched impact strength decreased quickly when φ≤ 10%, and then decreased gently with increasing φ. While the bending strength increased when φ≤ 10%, and then it decreased gradually with increasing φ. However, the effects of filler size and its surface treatment on these mechanical properties were insignificant. Furthermore, the Vicat softening temperature (T V ) of the samples was measured at a constant loading and a temperature ramp rate. The result showed that T V increased with the addition of. It indicates that CaCO 3 fillers are beneficial to improve the heat resistant properties of the resin.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Natural Fiber Reinforced Composites · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Manufacturing Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, P.R. China

Department of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou 510641, P.R. China

Department of Electrical Engineering, The Hong Kong Polytechnic University, Hong Hum, Kowloon Hong Kong, P.R. China

Hong Kong Plastic Technology Center, Kowloon, Hong Kong, P.R. China

References (12)

Show source-provided references
1. 10.1002/pen.76012031010.1002/pen.760120310 ↗
2. 2. Tang, C.Y. and Liang, J.Z. (2000). Proceedings of IMCCg’(2000), Hong Kong, 16-17 August, pp. 45-46.
3. 10.1002/app.1973.07017041410.1002/app.1973.070170414 ↗
4. 10.1002/pc.75008020810.1002/pc.750080208 ↗
5. 10.1007/BF0173060510.1007/BF01730605 ↗
6. 10.1002/app.1976.07020061610.1002/app.1976.070200616 ↗
7. 10.1007/BF0055174510.1007/BF00551745 ↗
8. 10.1002/pen.76035180310.1002/pen.760351803 ↗
9. 10.1002/pen.1156110.1002/pen.11561 ↗
10. 10.1002/(SICI)1097-4628(19990929)73:14<2985::AID-APP23>3.0.CO;2-F10.1002/(SICI)1097-4628(19990929)73:14<2985::AID-APP23>3.0.CO;2-F ↗
11. 10.1002/pc.1014210.1002/pc.10142 ↗
12. 10.1002/(SICI)1097-0126(200002)49:2<170::AID-PI322>3.0.CO;2-U10.1002/(SICI)1097-0126(200002)49:2<170::AID-PI322>3.0.CO;2-U ↗