journal article·2015-02

Fabrication and electrical characterization of bamboo fiber-reinforced polypropylene composite

Shamria Sabatina Latif, Shamsun Nahar, Mahbub Hasan

Publisher page

Abstract

The objective of this research is to characterize the bamboo fiber extracted from bamboo culms and to use these fibers as reinforcement in polypropylene-based composites. In the experiment, the fiber was characterized using wet chemical analysis, scanning electron microscope, and Fourier transform infrared spectroscopy. Chemical analysis showed that bamboo fiber had high amount of holocellulose containing alpha cellulose with compact sclerenchyma sheath. Bamboo fiber showed significant wave length at 3420 cm −1 for –OH stretching, 2921 cm −1 for –CH stretching, and 896 cm −1 for 1,4-β linkage for cellulose units in Fourier transform infrared spectroscopy spectrum. This paper also illustrates the electrical properties of the fabricated composite that consist of bamboo fiber-reinforced polypropylene. At constant temperature (about 30℃), frequency dependence of capacitance, resistivity, and dielectric constant was observed. There were approximately 19.35%, 90.38%, and 66.67% decrease in capacitance, resistance, and dielectric constant, respectively, over a range of frequency from 1 kHz to 10 kHz. This research is focused to use the polymeric composite as an insulating material while observing its electrical properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Electrical and Electronic Engineering, Ahsanullah University of Science and Technology, Dhaka, Bangladesh

Department of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh

Department of Arts & Science, Government Shaheed Suhrawardi College Dhaka, Bangladesh

References (43)

Show source-provided references
1. 10.1177/002199830935660410.1177/0021998309356604 ↗
2. 10.1177/073168440910314810.1177/0731684409103148 ↗
3. 10.1016/j.eurpolymj.2013.07.01310.1016/j.eurpolymj.2013.07.013 ↗
4. 10.1016/j.eurpolymj.2013.07.02810.1016/j.eurpolymj.2013.07.028 ↗
5. Jin YS · J Korean Phys Soc · 2006 · 49 · 513
6. 10.1016/j.eurpolymj.2013.04.00910.1016/j.eurpolymj.2013.04.009 ↗
7. 10.1016/j.eurpolymj.2013.03.02010.1016/j.eurpolymj.2013.03.020 ↗
8. 10.1016/j.eurpolymj.2013.07.02510.1016/j.eurpolymj.2013.07.025 ↗
9. 10.1016/j.carbpol.2014.03.03910.1016/j.carbpol.2014.03.039 ↗
10. 10.1021/sc500087z10.1021/sc500087z ↗
11. 10.1080/1023666X.2014.88001610.1080/1023666X.2014.880016 ↗
12. 10.1021/am501726d10.1021/am501726d ↗
13. 10.5539/ijb.v4n3p10210.5539/ijb.v4n3p102 ↗
14. Rogerson A · BioRes · 2014 · 9 · 7484
15. 10.1007/s10570-012-9741-110.1007/s10570-012-9741-1 ↗
16. 10.1002/(SICI)1097-4628(19980906)69:10<1891::AID-APP1>3.0.CO;2-910.1002/(SICI)1097-4628(19980906)69:10<1891::AID-APP1>3.0.CO;2-9 ↗
17. 10.1002/app.3131710.1002/app.31317 ↗
18. 10.1002/app.3282610.1002/app.32826 ↗
19. 10.1007/s00226-005-0016-y10.1007/s00226-005-0016-y ↗
20. 10.1007/s00226-009-0290-110.1007/s00226-009-0290-1 ↗
21. Rahman SMMA, Khan MA and Mustafa AI. Jute reinforced polypropylene composite: effect of surface pretreatment by photo curing with acrylic monomers. J Reinf Plast Compos 2009; 28: 1733–1745.10.1177/0731684408090371 ↗
22. 10.1002/app.1359310.1002/app.13593 ↗
23. 10.1080/0360255090282435810.1080/03602550902824358 ↗
24. 10.1016/S1359-835X(04)00178-210.1016/S1359-835X(04)00178-2 ↗
25. TAPPI Standard T210 cm-93:1993. Sampling and testing of wood pulp shipments and testing wood pulp shipments for moisture.
26. ASTM Standard D 1110-56:2013. Standard test method for water solubility of wood.
27. ASTM Standard D 1106-56:1996. Standard test method for acid insoluble lignin in wood.
28. ASTM Standard D 1104-56:1978. Method of test for holo-cellulose in wood.
29. ASTM Standard D 1103-60:1977. Standard test method for α-cellulose in wood.
30. 10.1016/j.compositesa.2003.09.01710.1016/j.compositesa.2003.09.017 ↗
31. 10.1007/BF0285724310.1007/BF02857243 ↗
32. 10.3390/polym204072810.3390/polym2040728 ↗
33. Dhal JP and Mishra SC. Processing and properties of natural fiber-reinforced polymer . J Mater 2013; article ID 297213 2013.10.1155/2013/297213 ↗
34. Li X. Physical, chemical and mechanical properties of bamboo and its utilization potential for bamboo boat manufacturing . MSc Thesis, Louisiana State University, USA, 2004.
35. 10.1007/s00226-009-0281-210.1007/s00226-009-0281-2 ↗
36. 10.1016/S0266-3538(02)00225-710.1016/S0266-3538(02)00225-7 ↗
37. 10.1039/c4ra01894j10.1039/c4ra01894j ↗
38. 10.1039/c3ra46592f10.1039/c3ra46592f ↗
39. 10.1021/sc500473a10.1021/sc500473a ↗
40. 10.1081/PPT-10010002710.1081/PPT-100100027 ↗
41. Shi FF · Polym Rev · 1996 · 36 · 795
42. Kumar V and Kumar R. Dielectric and mechanical properties of alkali and silane treated bamboo-epoxy nanocomposites. J Compos Mater 2012; 46: 3089–3101.10.1177/0021998311435831 ↗
43. 10.1177/073168441246129010.1177/0731684412461290 ↗