journal article·2018-01

Feasibility study of delamination in rotary ultrasonic-assisted drilling of glass fiber reinforced plastics

Mohammad Baraheni, Saeid Amini

Publisher page

Abstract

Glass fiber reinforced plastics are used in variety of industrial and constructional applications for their superb mechanical and physical properties. Delamination is one of the most important and prevalent damages in machining of glass fiber reinforced plastics. Diamond core drills have the capability of simultaneously drilling and grinding of fiber reinforced plastics, which results in hole quality improvement. Rotary ultrasonic-assisted drilling is the new machining process to drill holes on fiber reinforced plastics and has attracted increasing attention in recent years. In this paper, thrust force and delamination in rotary ultrasonic-assisted drilling of glass fiber reinforced plastics using diamond core drill have been investigated. A proper ultrasonic system for a core drill in ABAQUS was designed and fabricated. Influence of ultrasonic vibration and then tool grain size, fiber-volume fraction and machining parameters including spindle speed and feed rate on thrust force and delamination was investigated. Higher thrust force induces more delamination. As a result of the study, less delamination was achieved in ultrasonic-assisted mode by using a tool with larger grain size onto lower fiber-volume fraction composites. Additionally, experiments showed that lower spindle speed and higher feed rate induce more delamination.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Kashan, Kashan, Islamic Republic of Iran

References (63)

Show source-provided references
1. 10.1016/j.compscitech.2006.10.00910.1016/j.compscitech.2006.10.009 ↗
2. 10.1177/095440541140477410.1177/0954405411404774 ↗
3. 10.1016/S0007-8506(07)60186-310.1016/S0007-8506(07)60186-3 ↗
4. 10.1002/9780470314616.ch3710.1002/9780470314616.ch37 ↗
5. 10.1016/j.ijmachtools.2005.10.00410.1016/j.ijmachtools.2005.10.004 ↗
6. 10.1049/tpe.1984.018110.1049/tpe.1984.0181 ↗
7. 10.1016/0890-6955(92)90047-K10.1016/0890-6955(92)90047-K ↗
8. Hocheng H, Puw H and Yao, K. Experimental aspects of drilling of some fibre reinforced plastics. In Proceedings of the machining of composite materials symposium , Chicago, USA, ASM Materials week, 1–5 November 1992, pp.127–138.
9. 10.1177/002199830935124410.1177/0021998309351244 ↗
10. 10.1016/S1359-835X(96)00106-610.1016/S1359-835X(96)00106-6 ↗
11. 10.1016/S0263-8223(03)00181-810.1016/S0263-8223(03)00181-8 ↗
12. 10.1016/j.jmatprotec.2005.06.03910.1016/j.jmatprotec.2005.06.039 ↗
13. Hocheng H. Machining technology for composite materials, 1st ed. Cambridge, UK: Woodhead Publishing, 2011, pp. 333–364.10.1533/9780857095145 ↗
14. 10.1007/s00170-014-5973-610.1007/s00170-014-5973-6 ↗
15. 10.1007/978-0-387-68619-610.1007/978-0-387-68619-6 ↗
16. 10.1016/S0890-6955(96)00095-810.1016/S0890-6955(96)00095-8 ↗
17. 10.1016/j.jmatprotec.2006.11.14610.1016/j.jmatprotec.2006.11.146 ↗
18. 10.1016/1359-835X(95)00013-R10.1016/1359-835X(95)00013-R ↗
19. 10.1016/j.compstruct.2003.09.05410.1016/j.compstruct.2003.09.054 ↗
20. 10.1177/002199830934535410.1177/0021998309345354 ↗
21. 10.1007/s00170-015-7269-x10.1007/s00170-015-7269-x ↗
22. 10.1016/j.ijmachtools.2007.10.01510.1016/j.ijmachtools.2007.10.015 ↗
23. 10.1023/A:100897321134710.1023/A:1008973211347 ↗
24. 10.1007/s10443-012-9276-510.1007/s10443-012-9276-5 ↗
25. 10.1016/j.compscitech.2004.07.01410.1016/j.compscitech.2004.07.014 ↗
26. Budan DA · J Eng Sci Technol · 2011 · 6 · 733
27. Kumabe J · 1979
28. 10.1016/j.ijmachtools.2006.10.00710.1016/j.ijmachtools.2006.10.007 ↗
29. 10.1016/S0007-8506(07)61939-810.1016/S0007-8506(07)61939-8 ↗
30. 10.1016/S1359-835X(02)00207-510.1016/S1359-835X(02)00207-5 ↗
31. 10.1016/j.ijmachtools.2005.05.02310.1016/j.ijmachtools.2005.05.023 ↗
32. 10.1177/002199831452785710.1177/0021998314527857 ↗
33. 10.1016/S0007-8506(07)62828-510.1016/S0007-8506(07)62828-5 ↗
34. 10.1007/s00170-012-4292-z10.1007/s00170-012-4292-z ↗
35. 10.1016/j.ijmachtools.2005.01.03410.1016/j.ijmachtools.2005.01.034 ↗
36. Petrovicha OA · Appl Mech Mater · 2015 · 698 · 529
37. 10.1007/s00170-015-7262-410.1007/s00170-015-7262-4 ↗
38. 10.4028/www.scientific.net/KEM.389-390.28310.4028/www.scientific.net/KEM.389-390.283 ↗
39. Demir H · J Mech Eng · 2010 · 56 · 447
40. 10.1115/1.280328810.1115/1.2803288 ↗
41. 10.1115/1.203451110.1115/1.2034511 ↗
42. 10.1016/j.ijmachtools.2011.10.00710.1016/j.ijmachtools.2011.10.007 ↗
43. Torabizadeh MA · Ind J Eng Mater Sci · 2013 · 20 · 299
44. MIL-HDBK-5H. General aluminum alloy. Fatigue properties, Military handbook . USA: Department of defense, 2003, p.277.
45. Fatigue Data at zero mean stress comes from ASME BPV Code , ASME, USA, 1998; Section 8, Div 2, Table 5-110.1.
46. 10.1016/j.precisioneng.2007.08.00310.1016/j.precisioneng.2007.08.003 ↗
47. 10.1007/s12239-010-0101-610.1007/s12239-010-0101-6 ↗
48. 10.1016/j.compscitech.2009.02.00810.1016/j.compscitech.2009.02.008 ↗
49. 10.1504/IJPTECH.2007.01534710.1504/IJPTECH.2007.015347 ↗
50. 10.1080/10426914.2016.114018810.1080/10426914.2016.1140188 ↗
51. Sarwade A. Study of micro rotary ultrasonic machining . Masters Dissertation, University of Nebraska: Lincoln, 2010.
52. 10.1016/j.jmatprotec.2013.09.01310.1016/j.jmatprotec.2013.09.013 ↗
53. 10.1016/j.ijmachtools.2014.09.00310.1016/j.ijmachtools.2014.09.003 ↗
54. 10.1016/0890-6955(94)00055-O10.1016/0890-6955(94)00055-O ↗
55. 10.1016/S0263-8223(97)00068-810.1016/S0263-8223(97)00068-8 ↗
56. 10.1080/10426914.2016.114019110.1080/10426914.2016.1140191 ↗
57. 10.1080/10426914.2014.94187010.1080/10426914.2014.941870 ↗
58. 10.1016/j.jmapro.2016.12.00910.1016/j.jmapro.2016.12.009 ↗
59. Debnath K · Mater Manuf Process · 2016 · 32 · 1
60. Razfar MR. Machining and tool principles, 1st ed. Tehran, Iran: Amirkabir University, 2011, pp. 185–205. (In Persian).
61. Amini S, Barani AR, Paktinat H. Machining and cutting tools, 1st ed. Iran: Kashan University, 2013, pp. 25–44. (In Persian).
62. Bajpai PK · J Thermoplast Compos Mater · 2015 · 30 · 1
63. 10.1002/pc.2357210.1002/pc.23572 ↗