journal article·2015-04

Effects of tool parameters on cutting force in orthogonal machining of T700/LT03A unidirectional carbon fiber reinforced polymer laminates

Qinglong An, Weiwei Ming, Xiaojiang Cai, Ming Chen

Publisher page

Abstract

In the present work, orthogonal cutting tests were conducted on unidirectional carbon fiber reinforced polymer laminates to get the basis for the design of unidirectional carbon fiber reinforced polymer special cutting tools. Uncoated and diamond-coated carbide cutting tools were investigated in the experiments. Rake angle, clearance angle and rounded edge radius were evaluated in terms of cutting forces under cutting speed range of 100–300 m/min. Experimental results showed that diamond-coated tools were more suitable for cutting 700/LT03A unidirectional carbon fiber reinforced polymer compared with uncoated carbide tools under high-speed cutting conditions. The optimal tool angles were 25 ° of rake angle and 15 ° of clearance angle for cutting T700/LT03A unidirectional carbon fiber reinforced polymer by reducing the cutting forces. Also, the optimal cutting edge radius r ɛ was selected as 15 µm with the cutting depth a c = 20 µm.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai , PR China

Department of Machining Technology, Precision Machining Center, Shanghai Institute of Spaceflight Control Technology, Shanghai, PR China

References (33)

Show source-provided references
1. 10.1080/1094034970894564110.1080/10940349708945641 ↗
2. 10.1016/S0007-8506(07)61703-X10.1016/S0007-8506(07)61703-X ↗
3. 10.1016/j.paerosci.2005.02.00410.1016/j.paerosci.2005.02.004 ↗
4. Chen SJ · Acta Aeronaut Astronaut Sin · 2008 · 3 · 605
5. Kupke M and Kolax M. CFRP-fuselage – ensuring future competitiveness. In: SAMPE Europe international conference , Paris, France, 2004, pp. 432–437. Paris: SAMPE Europe.
6. 10.1016/S0007-8506(07)60186-310.1016/S0007-8506(07)60186-3 ↗
7. 10.1007/s00170-014-5656-310.1007/s00170-014-5656-3 ↗
8. 10.1016/S0263-8223(02)00257-X10.1016/S0263-8223(02)00257-X ↗
9. 10.1177/073168441244465310.1177/0731684412444653 ↗
10. 10.1016/j.compstruct.2014.06.03410.1016/j.compstruct.2014.06.034 ↗
11. 10.1177/073168441244465410.1177/0731684412444654 ↗
12. 10.1016/j.ijmachtools.2005.10.00410.1016/j.ijmachtools.2005.10.004 ↗
13. 10.1016/0010-4361(83)90157-X10.1016/0010-4361(83)90157-X ↗
14. 10.1016/S0924-0136(00)00549-510.1016/S0924-0136(00)00549-5 ↗
15. Caprino G, De lorio I, Santo L, et al. On the machinability of composite materials. In: IDPT-2: 2. World conference on integrated design and process technology , Austin, TX, USA, 1–4 December 1996, pp. 259–266. Austin: Society for Design and Process Science.
16. 10.1016/0890-6955(95)00014-O10.1016/0890-6955(95)00014-O ↗
17. 10.1016/0890-6955(95)00015-P10.1016/0890-6955(95)00015-P ↗
18. 10.1081/MST-10010861610.1081/MST-100108616 ↗
19. 10.1016/j.jmatprotec.2008.10.02310.1016/j.jmatprotec.2008.10.023 ↗
20. 10.1016/1359-835X(95)00013-R10.1016/1359-835X(95)00013-R ↗
21. 10.1016/S0020-7403(96)00061-610.1016/S0020-7403(96)00061-6 ↗
22. 10.1016/j.ijmecsci.2014.03.01710.1016/j.ijmecsci.2014.03.017 ↗
23. 10.1016/0890-6955(95)93039-910.1016/0890-6955(95)93039-9 ↗
24. 10.1016/S0890-6955(03)00090-710.1016/S0890-6955(03)00090-7 ↗
25. 10.1016/j.compscitech.2004.09.02810.1016/j.compscitech.2004.09.028 ↗
26. 10.1016/j.compscitech.2007.01.02510.1016/j.compscitech.2007.01.025 ↗
27. 10.1016/j.wear.2013.03.01710.1016/j.wear.2013.03.017 ↗
28. 10.1016/S0890-6955(96)00095-810.1016/S0890-6955(96)00095-8 ↗
29. 10.1016/j.compscitech.2011.08.00210.1016/j.compscitech.2011.08.002 ↗
30. Shaw MC · 2005
31. 10.1016/j.ijrmhm.2013.04.01710.1016/j.ijrmhm.2013.04.017 ↗
32. 10.1115/1.280682910.1115/1.2806829 ↗
33. Caprino G · Part I: Unidirectional glass-fibre-reinforced plastics. Compos Part A-Appl S · 1998 · 29 · 887