Review and Comparison of Fracture Mechanics-based Bond Strength Models for FRP-strengthened Structures
Source abstract
Abstract
This study presents a critical review on fracture mechanics-based bond strength models related to the use of externally bonded fiber reinforced polymer (FRP) composites in the rehabilitation of concrete. The predictions from a set of typically used bond strength models are compared with each other through a set of parametric studies. Given that the models use a diverse set of parameters, in order to enable an equitable comparison, parameters are carefully chosen as related to (a) characteristics of concrete, (b) characteristics of the FRP, and (c) characteristics related to concrete cover and epoxy mortar. The corresponding reliability and accuracy is also confirmed by comparing with test data. A comparison of some of the major models in this class with experimental data shows that the accuracy in prediction of P max and L e varies substantially with very few of the models actually incorporating the effects of critical bond parameters such as adhesive thickness and characteristics of the FRP–concrete interphase. Furthermore, the direct application of the results of these models into a sectional analysis provides an underestimation of the capacity of FRP-rehabilitated RC beams, with the exception of the ACI-440 approach which in most cases overpredicts results indicating its non-conservative nature. The use of procedures recommended in ACI-440 and as proposed herein are shown to provide a more accurate description, with the latter providing a means of determining the mode of failure through incorporation of the energetics of fracture interaction between cracking in concrete and redistribution of forces to the FRP. Critical aspects still needing study are also identified.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Structural Engineering University of California, San Diego, MC-0085, La Jolla CA 92093-0085, USA;
Department of Structural Engineering University of California, San Diego, MC-0085, La Jolla CA 92093-0085, USA
Division of Engineering Services California Department of Transportation Sacramento, CA 95816, USA
References (32)
Show source-provided references
1. 10.1007/BF0001316110.1007/BF00013161 ↗
2. Yuan, H. · JSCE Journal of Structural Mechanics and Earthquake Engineering · 2001 · 18 · 27
3. 10.1061/(ASCE)0733-9399(2002)128:5(562)10.1061/(ASCE)0733-9399(2002)128:5(562) ↗
4. Holzenkampfer, P. (1994). Ingenieurmodelle Des Verbundes Geklebter Bewehrung Fur Betonbauteile, Dissertation, TU Braunschweig, Germany.
5. Neubauer, U. · 109
6. Comite Euro-International du Beton, CEB-FIP Model Code 1990 (CEB-FIP MC90), Bulletin D'Information No. 215, Lausanne, 1993.
7. Brosens, K. · 635
8. Brosens, K. (2001). Anchorage of Externally Bonded Steel Plates and CFRP Laminates for the Strengthening of Concrete Elements. PhD Dissertation, Department of Civil Engineering, Katholieke Universiteit Leuven.
9. 10.1061/(ASCE)0733-9445(2001)127:7(784)10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
10. 10.1016/S0950-0618(03)00043-610.1016/S0950-0618(03)00043-6 ↗
11. Nakaba, K. · ACI Structural Journal · 2001 · 98 · 359
12. 10.1016/0008-8846(73)90096-310.1016/0008-8846(73)90096-3 ↗
13. Monti, G. · 183
14. Ulaga, T. · 153
15. Ueda, T. · 113
16. 10.1533/978185573761710.1533/9781855737617 ↗
17. ACI · 2002
18. Eng, C. (2004). The Use of Mechanical Anchorage in FRP Strengthening of Reinforced Concrete Beams, Masters Thesis, Department of Structural Engineering, University of California San Diego.
19. 10.1061/(ASCE)1090-0268(1999)3:4(153)10.1061/(ASCE)1090-0268(1999)3:4(153) ↗
20. Kamiharako, A. · JSCE Journal of Material, Concrete Structures and Pavements · 1999 · 45 · 197
21. Sato, Y. · JSCE Journal of Material, Concrete Structures and Pavements · 2000 · 47 · 71
22. Yoshizawa, H. · JSCE Journal of Material, Concrete Structures and Pavements · 2000 · 49 · 105
23. 10.1111/j.1467-8667.2005.00402.x10.1111/j.1467-8667.2005.00402.x ↗
24. Wu, Z. S. · JSCE Journal of Material, Concrete Structures and Pavements · 2000 · 49 · 231
25. Wu, Z. S. · JSCE Journal of Structural Engineering · 2000 · 46 · 1431
26. Niu, H. D. (2002). Interfacial Fracture Mechanisms and Performance Evaluation of RC Structural System Strengthened with FRP Sheets. PhD Dissertation, Ibaraki University, Japan.
27. Niedermeier, R. (2000). Zugkraftdeckung Bei klebearmierten Bauteilen (Envelope Line of Tensile Forces While using Externally Bonded Reinforcement), Doctoral Dissertation, TU Munchen.
28. Federation internationale du beton (fib) (2001). Externally Bonded FRP Reinforcement for RC Structures, Bulletin 14, Lausanne, Switzerland.
29. 10.1016/j.compscitech.2004.11.01010.1016/j.compscitech.2004.11.010 ↗
30. AASHTO · 1998
31. Niu, H. · Composites B · 2006 · 37 · 213
32. Wu, Z. S. · JSCE Journal of Materials, Concrete Structures and Pavements · 2000 · 46 · 153