Fiber length, thermal, mechanical, and dynamic mechanical properties of injection-molded glass-fiber/polyamide 6,6: plasticization effect
Source abstract
Abstract
Unreinforced- and glass fiber-reinforced-polyamide 6,6 specimens were subjected to dry, 50% RH, and wet conditions. FLD study showed that more fiber degradation occurred during processing of the composites with higher fiber loading. TGA results revealed that about 2% and 5% levels of moisture have been absorbed by the specimens subjected to 50% RH and wet conditions, respectively. From DSC results, with moisture uptake, there were no significance changes in the melting temperature, crystallization temperature, and enthalpy of crystalline; however, degree of crystallinity and enthalpy of melting decreased. Tensile strength, tensile modulus, flexural strength, and flexural modulus decreased with moisture uptake, while tensile strain and flexural displacement increased. DMA study showed that tan delta at room temperature and tan delta maxima increased with moisture absorption, while temperatures at maximum tan delta in α- and β-transition regions decreased.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemistry, Polymer and Composite Materials Research Laboratory, University of Malaya, Malaysia,
Department of Chemistry, Polymer and Composite Materials Research Laboratory, University of Malaya, Malaysia
References (32)
Show source-provided references
1. 10.1007/BF0035132210.1007/BF00351322 ↗
2. 10.1016/j.compositesa.2007.06.00610.1016/j.compositesa.2007.06.006 ↗
3. Garbassi F. and Po R. Engineering Thermoplastics - Overview. In: Mark HF (ed.) Encyclopedia of Polymer Science and Technology . 3rd edn. Volume 2, New York: John Wiley and Sons, 2003, pp.307-328.
4. ASTM Standard, Standard Test Method for Tensile Properties of Plastics, 2003, D638-03, pp. 228-244.
5. ASTM Standard, Standard Practice for Conditioning Plastics for Testing, 2000, D618-00, pp. 39-42.
6. ASTM Standard, Standard Test Method for Flexural properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, 2003, D790-03, pp. 149-159.
7. 10.1016/j.polymertesting.2005.09.00510.1016/j.polymertesting.2005.09.005 ↗
8. Hassan A. · Malaysian J Sci · 2001 · 20 · 51
9. 10.1002/pc.75010050710.1002/pc.750100507 ↗
10. Jones DP · Plast Rubber Process Appl · 1986 · 6 · 67
11. 10.1177/073168440403396010.1177/0731684404033960 ↗
12. 10.1016/S0142-9418(02)00068-510.1016/S0142-9418(02)00068-5 ↗
13. 10.1016/S0032-3861(02)00239-210.1016/S0032-3861(02)00239-2 ↗
14. 10.1002/(SICI)1099-0488(20000215)38:4<516::AID-POLB3>3.0.CO;2-Y10.1002/(SICI)1099-0488(20000215)38:4<516::AID-POLB3>3.0.CO;2-Y ↗
15. 10.1021/ja944125d10.1021/ja944125d ↗
16. 10.1016/S0014-3057(01)00033-710.1016/S0014-3057(01)00033-7 ↗
17. 10.1016/S0142-9418(03)00043-610.1016/S0142-9418(03)00043-6 ↗
18. 10.3144/expresspolymlett.2008.1110.3144/expresspolymlett.2008.11 ↗
19. Kohan M. Polyamide Plastics Handbook. New York: Hanser-Gardner Publications, Inc., 1995, p.631.
20. 10.1016/j.matdes.2006.03.01410.1016/j.matdes.2006.03.014 ↗
21. 10.1016/j.compositesa.2008.10.01310.1016/j.compositesa.2008.10.013 ↗
22. 10.1016/j.compstruct.2005.09.02210.1016/j.compstruct.2005.09.022 ↗
23. 10.1002/pi.153510.1002/pi.1535 ↗
24. 10.1016/S0032-3861(01)00238-510.1016/S0032-3861(01)00238-5 ↗
25. 10.1016/j.compscitech.2006.06.01910.1016/j.compscitech.2006.06.019 ↗
26. 10.1016/S1359-835X(01)00032-X10.1016/S1359-835X(01)00032-X ↗
27. Nielsen LE · 1974
28. 10.1007/BF0065330910.1007/BF00653309 ↗
29. 10.1016/0032-3861(93)90780-E10.1016/0032-3861(93)90780-E ↗
30. 10.1016/0378-5173(94)90057-410.1016/0378-5173(94)90057-4 ↗
31. 10.1016/0266-3538(96)00065-610.1016/0266-3538(96)00065-6 ↗
32. 10.1002/app.1991.07047001710.1002/app.1991.070470017 ↗