Characterization and comparison of mechanical behavior of agro fiber-filled high-density polyethylene bio-composites
Source abstract
Abstract
The effects of four agro fibers on the mechanical properties of high-density polyethylene, particle sizes of the fibers, flexural properties, and impact properties of the composites were investigated. Their performances were compared with commonly used wood flour filler. In this research, high-density polyethylene composites filled with agro fiber at high filler content of 65 wt% were prepared. Environment-friendly, sustainable and biodegradable composites were fabricated by melt compounding and extrusion processing technology, using corn cob, rice hull, flax shive, and walnut shell flour with particle sizes distribution 0.295 mm to <0.125 mm as reinforcements for thermoplastics as an alternative to wood fiber. The influence of fiber type and high filler loading level on composite properties was investigated. Mechanical analysis showed that flexural strength, flexural modulus, and un-notched Izod impact strength increased with filler loading at the 65 wt% level for all composites, but there was little difference in both properties among the composites from various fiber types. Bulk density was measured for these agro fiber fillers in relation to wood flour, and the lowest amount was 150 kg/m 3 . The results of the study demonstrate that agro fiber-filled high-density polyethylene composites can be used as reinforcements for engineering value-added bio-composite materials.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Innovations in Concrete and Construction Materials · Mechanical Engineering and Vibrations Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Composite Materials and Engineering Center, Washington State University, Pullman, WA, USA
Department of Industrial Chemistry, Faculty of Physical Sciences, Ebonyi State University, Abakaliki, Ebonyi, Nigeria
References (41)
Show source-provided references
1. Lou R, Wu S, Lv G, . Pyrolytic products from rice straw and enzymatic/mild acidolysis lignin (EMAL). BioResources 2010; 5: 2184–2194.10.15376/biores.5.4.2184-2194 ↗
2. Kim H, Eom YG. Thermogravimetric analysis of rice husk flour for a new raw material of lignocellulosic fiber-thermoplastic composites. Mokchae Konghak 2001; 29: 59–67.
3. 10.3390/ijms1110403510.3390/ijms11104035 ↗
4. 10.3390/s801050010.3390/s8010500 ↗
5. 10.1002/pi.236010.1002/pi.2360 ↗
6. 10.1016/j.compstruct.2006.04.06910.1016/j.compstruct.2006.04.069 ↗
7. Ashori A, Bahraini Z. Evaluation of Calotropis gigantea as a promising raw material for fiber-reinforced composites. J Comput Math 2009; 43: 1297–1304.
8. 10.1021/sc300084z10.1021/sc300084z ↗
9. 10.1007/s10924-006-0021-810.1007/s10924-006-0021-8 ↗
10. 10.1002/app.3262310.1002/app.32623 ↗
11. 10.1016/j.indcrop.2008.04.01610.1016/j.indcrop.2008.04.016 ↗
12. 10.1007/s00289-010-0381-z10.1007/s00289-010-0381-z ↗
13. 10.1007/s10924-009-0155-610.1007/s10924-009-0155-6 ↗
14. 10.1002/pc.2040010.1002/pc.20400 ↗
15. 10.1016/j.indcrop.2010.02.00410.1016/j.indcrop.2010.02.004 ↗
16. 10.1016/j.jaap.2004.07.00310.1016/j.jaap.2004.07.003 ↗
17. 10.1016/S0165-2370(03)00065-210.1016/S0165-2370(03)00065-2 ↗
18. 10.1002/app.2271710.1002/app.22717 ↗
19. 10.1016/j.compscitech.2010.01.02210.1016/j.compscitech.2010.01.022 ↗
20. 10.1016/j.compositesa.2007.10.01710.1016/j.compositesa.2007.10.017 ↗
21. Balasuriya PW, Ye L, Mai YW. Mechanical properties of wood flake-polypropylene composites. Part 1: Effects of processing methods and matrix melt flow behavior. Compos Part A: Appl Sci 2001; 32: 619–629.
22. 10.1007/s10924-011-0349-610.1007/s10924-011-0349-6 ↗
23. Nitin S, Singh VK. Mechanical behavior of walnut reinforced composites. J Mater Environ Sci 2013; 4: 233–238.
24. 10.1023/A:102574110062810.1023/A:1025741100628 ↗
25. Stark NM, Rowlands RE. Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites. Wood Fiber Sci 2003; 35: 167–174.
26. Hofman W. Rubber technology handbook, Munich: Hanser, 1989.
27. 10.1021/ie970017z10.1021/ie970017z ↗
28. 10.1002/(SICI)1097-4628(19980228)67:9<1503::AID-APP1>3.0.CO;2-H10.1002/(SICI)1097-4628(19980228)67:9<1503::AID-APP1>3.0.CO;2-H ↗
29. 10.1016/S1359-835X(03)00234-310.1016/S1359-835X(03)00234-3 ↗
30. Sarawat R, Watanachai S, Sarot J, . Highly filled polypropylene rubber wood flour composites. J Eng 2011; 15: 18–30.
31. 10.1016/S0142-9418(02)00018-110.1016/S0142-9418(02)00018-1 ↗
32. 10.1002/app.2162310.1002/app.21623 ↗
33. 10.1002/app.2176510.1002/app.21765 ↗
34. 10.1016/j.compscitech.2008.01.00410.1016/j.compscitech.2008.01.004 ↗
35. 10.1016/0266-3538(91)90072-W10.1016/0266-3538(91)90072-W ↗
36. 10.1016/j.polymdegradstab.2007.10.01210.1016/j.polymdegradstab.2007.10.012 ↗
37. 10.1016/j.compositesa.2007.02.00110.1016/j.compositesa.2007.02.001 ↗
38. 10.1016/j.compositesa.2008.09.01110.1016/j.compositesa.2008.09.011 ↗
39. 10.1016/j.compositesa.2007.01.01510.1016/j.compositesa.2007.01.015 ↗
40. 10.4028/www.scientific.net/AMR.83-86.36710.4028/www.scientific.net/AMR.83-86.367 ↗
41. Mahdavi S, Kermanian H, Varshoei A. Comparison of mechanical properties of date palm fiber-polypropylene composites. BioResources 2010; 5: 2391–2403.10.15376/biores.5.4.2391-2403 ↗