Elastic-damage deformation response of fiber-reinforced polymer composite laminates with lamina interfaces
Source abstract
Abstract
The single-layer and multi-layer finite element models are developed and examined for adequacy in predicting the elastic-damage response of fiber-reinforced polymer composite laminates. A new experimental-computational approach featuring a two-tier mesh convergence analysis of the finite element models is developed. A 12-ply carbon fiber-reinforced polymer composite laminate beam specimen with anti-symmetric layups is designed and loaded to induce matrix damage under significant deflection without catastrophic fracture. A constitutive model incorporating Hashin’s equations for damage initiation criteria, along with an energy-based damage propagation law is employed in the finite element simulation. The results shows that the multi-layer finite element model predicts well the load–deflection curve of the carbon fiber-reinforced polymer composite laminate, while the single-layer model overestimates the elastic flexural stiffness of the specimen by 47 %. During the flexural deformation, matrix damage initiates in the central and edge regions of the critical laminas under compressive and tensile stresses, respectively. The multi-layer finite element model also predicted the matrix-induced interface delamination along the edges of the critical laminas under tension, as observed experimentally. The model demonstrates the adequacy in representing the role of lamina interface in dictating the elastic-damage response of carbon fiber-reinforced polymer composite laminates manufactured by prepreg layups method.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center for Composites, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Johor, Malaysia
Fatigue and Fracture Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, Iran University of Science & Technology, Tehran, Iran
References (35)
Show source-provided references
1. 10.1177/073168440504819910.1177/0731684405048199 ↗
2. 10.1177/073168441455574310.1177/0731684414555743 ↗
3. 10.1201/978142005829110.1201/9781420058291 ↗
4. 10.1007/s11831-008-9016-z10.1007/s11831-008-9016-z ↗
5. Smith P · Comprehensive Compos Mater · 2002 · 2 · 107
6. 10.1016/j.compscitech.2007.05.03810.1016/j.compscitech.2007.05.038 ↗
7. 10.1016/j.mechmat.2011.01.00210.1016/j.mechmat.2011.01.002 ↗
8. 10.1016/j.compstruct.2005.11.00410.1016/j.compstruct.2005.11.004 ↗
9. 10.1016/j.ijsolstr.2003.11.03910.1016/j.ijsolstr.2003.11.039 ↗
10. 10.1016/j.compstruct.2008.03.00710.1016/j.compstruct.2008.03.007 ↗
11. Hinton MJ · 2004
12. 10.1016/j.mechmat.2007.03.00510.1016/j.mechmat.2007.03.005 ↗
13. 10.1007/978-94-007-2666-610.1007/978-94-007-2666-6 ↗
14. 10.1177/002199831349947610.1177/0021998313499476 ↗
15. 10.1016/j.compositesa.2014.02.01310.1016/j.compositesa.2014.02.013 ↗
16. 10.1016/j.compositesa.2007.01.01710.1016/j.compositesa.2007.01.017 ↗
17. Camanho PP · NASA-Technical Paper · 2002 · 211737 · 33
18. 10.1016/j.compstruct.2014.02.01510.1016/j.compstruct.2014.02.015 ↗
19. Pinho ST. Modelling failure of laminated composites using physically-based failure models . PhD Thesis, Imperial College London (University of London), London, UK, 2005.
20. Koloor SSR. Simulation methodology for fracture processes of composite laminates using damage-based methods, Malaysia: Faculty of Mechanical Engineering. Universiti Teknologi Malaysia, 2016, pp. 330–330.
21. 10.1016/j.compstruct.2011.08.00510.1016/j.compstruct.2011.08.005 ↗
22. 10.3390/en511468310.3390/en5114683 ↗
23. Grujicic M · Multidiscipline Model Mater Struct · 2009 · 5 · 1
24. 10.1016/j.compstruct.2012.11.02610.1016/j.compstruct.2012.11.026 ↗
25. Siromani D · 201310.17918/etd-4380 ↗
26. 10.1016/j.compositesb.2013.08.01710.1016/j.compositesb.2013.08.017 ↗
27. 10.1177/105678951350412310.1177/1056789513504123 ↗
28. Kachanov L · 2013
29. 10.1016/0167-6636(94)00053-010.1016/0167-6636(94)00053-0 ↗
30. 10.1115/1.315366410.1115/1.3153664 ↗
31. ABAQUS-6.9EF. Theory manual, 2010.
32. Chaboche J · Mech Behav Anisotropic Solids · 1979 · 2039 · 737
33. ASTM. D4762–08 Standard guide for testing polymer matrix composite materials. West Conshohocken, PA: ASTM, 2008.
34. 10.1002/pc.2307110.1002/pc.23071 ↗
35. 10.1016/j.jmatprotec.2014.04.03010.1016/j.jmatprotec.2014.04.030 ↗