Natural fiber-based reinforcements in epoxy composites processed by filament winding
Source abstract
Abstract
Single natural fibers have rather high mechanical properties; especially, Young’s modulus can be as high as for E-glass fibers. However, the good properties of natural fibers are not exploited efficiently in existing applications. Continuous fibers are required for high-performance applications. Filament winding is a method to produce aligned technical composites which have high fiber content. This work studied the mechanical properties of natural fiber yarn-reinforced composites. Flax and viscose fiber tubular composite samples were produced by filament winding and their properties were compared with the properties of E-glass fiber composites. The flax fiber yarn could be wound to produce a relatively stiff composite tube but poor adhesion between the matrix and fibers affected the properties. The properties of the E-glass fiber composites were superior in comparison to the flax fiber composites. However, the results from the split disk tensile test were competent, although they were only 25–29% of the properties of the E-glass fiber composites. Water absorption and impact strength were notably the weakest properties of the flax fiber composites. The viscose yarn could be wound into a composite tube but the composite was too brittle for machining specimens. In order to develop the structural natural fiber composites, the adhesion and the wet-out of the fibers should be improved.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science, Tampere University of Technology, P.O. Box 589, FI-33101 Tampere, Finland.
Department of Materials Technology, Mikkeli University of Applied Science, P.O. Box 181 FI-50101 Mikkeli, Finland.
References (16)
Show source-provided references
1. 10.1016/B978-1-84569-267-4.50019-310.1016/B978-1-84569-267-4.50019-3 ↗
2. 10.3139/9783446442504.00110.3139/9783446442504.001 ↗
3. Madsen B. Properties of plant fibre yarn polymer composites – an experimental study. PhD Thesis, Department of Civil Engineering, Technical University of Denmark, 2004, p. 206.
4. 10.1007/s10443-006-9010-210.1007/s10443-006-9010-2 ↗
5. Goutianos S, Peijs T, Nystrom B and Skrifvars M. Textile reinforcements based on aligned flax fibres for structural composites. In: Proceedings of Composites Innovation 2007 – Improved Sustainability and Environmental Performance , 2007, Oct 4–5, Barcelona (ES).
6. 10.1016/S0266-3538(98)00169-910.1016/S0266-3538(98)00169-9 ↗
7. Lee ST · 1993
8. Gohil PP · Int J Eng Technol · 2010 · 2 · 111
9. 10.1023/B:JMSC.0000017779.08041.4910.1023/B:JMSC.0000017779.08041.49 ↗
10. 10.1002/app.2071210.1002/app.20712 ↗
11. 10.4188/jte.54.16510.4188/jte.54.165 ↗
12. 10.1177/09636935960050030310.1177/096369359600500303 ↗
13. 10.1002/pc.2067510.1002/pc.20675 ↗
14. 10.1016/0022-5096(65)90035-910.1016/0022-5096(65)90035-9 ↗
15. Amroy Europe Oy. ‘Amroy EpoBioX presentation’, [Homepage on the Internet], http://www.amroy.fi/pdf/Amroy%20Epobiox%20presentation.pdf (no date, accessed November 8, 2010).
16. 10.1016/j.compositesa.2005.08.01610.1016/j.compositesa.2005.08.016 ↗