journal article·2009-11

Correlated Rules between Complex Structure of Composite Components and Manufacturing Defects in Autoclave Molding Technology

Xueming Wang, Zuoguang Zhang, Fuyuan Xie, Min Li, DI Dai, Fei Wang

Publisher page

Abstract

Based on statistical analysis, considerable defect information obtained by nondestructive identification (NDI) techniques for composite components, different type defects which often form in autoclave molding of composites were summarized, and the effect rules of complex structure in composite components on manufacturing defects were also revealed. Combined with statistical results and defect micrographs, the strong correlation between geometric characteristics (for instance, thickness, gradient of thickness variation, curvature radius) in composite components and controllability of manufacturing defects was discussed in detail. It was found that delamination, pore, void, and rich resin were the four main defects in autoclave molding, and that the ratio of defect appearance was remarkably influenced by complex structure of composite components. Especially, geometric characteristics of composite components had a significant influence on the defect type and defect ratio. For example, too thin or too thick components, too small radius and abrupt change of thickness in components would obviously increase the ratio of defect production. Thickness, curvature radius, and gradient of thickness variation would probably lead to the defects of delamination and void, and gradient of thickness variation would also result in rich resin around the overlap region of long fiber and short fiber in the thickness transition zone.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Injection Molding Process and Properties · Material Properties and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Material Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, PR China, , Beijing Aeronautical Manufacturing Technology Research Institute Beijing 100024, PR China

School of Material Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, PR China

Beijing Aeronautical Manufacturing Technology Research Institute Beijing 100024, PR China

References (19)

Show source-provided references
1. 10.1177/00219983920260100610.1177/002199839202601006 ↗
2. 10.1016/j.ijfatigue.2006.02.03310.1016/j.ijfatigue.2006.02.033 ↗
3. 10.1016/0263-8223(84)90042-410.1016/0263-8223(84)90042-4 ↗
4. Springer, G.S. · Japan Society for Composites Materials · 1982 · 1 · 23
5. 10.1007/3-540-16423-5_1310.1007/3-540-16423-5_13 ↗
6. 10.1016/0010-4361(92)90186-X10.1016/0010-4361(92)90186-X ↗
7. 10.1016/0956-7143(94)90023-X10.1016/0956-7143(94)90023-X ↗
8. 10.1177/07316844990180080210.1177/073168449901800802 ↗
9. 10.1106/F97F-U8RD-QYN8-Q8JU10.1106/F97F-U8RD-QYN8-Q8JU ↗
10. Huoying, D. · Acta Material Composite Sinica · 2007 · 24 · 34
11. 10.1002/(SICI)1097-0207(19990110)44:1<1::AID-NME481>3.0.CO;2-K10.1002/(SICI)1097-0207(19990110)44:1<1::AID-NME481>3.0.CO;2-K ↗
12. 10.1177/07316844980170040210.1177/073168449801700402 ↗
13. 10.1177/00219980177266184910.1177/002199801772661849 ↗
14. 10.1016/S1359-835X(02)00017-910.1016/S1359-835X(02)00017-9 ↗
15. Costa, V.A.F. · Advanced Computational Methods in Heat Transfer · 2000 · 21
16. Quseng, Z. ( 2003). Advanced Composite Handbook, p. 1230, Machinery Industry Press, Beijing (in Chinese).
17. Huoying, D. · Aerospace Materials and Technology · 2007 · 37 · 65
18. Aeronautical Academy of China, Design Handbook of Composite Structure, Beijing: Aeronautical Industry Press (2001) 81 (in Chinese).
19. Ning, Z., Boming, Z. and Lijian, P. ( 2007). Finite Element Analysis for Effect of Flexible Die on Transmission of Pressure to Integrated Structure, Aeronautical Manufacturing Technology (supplement issue) 110-113 (in Chinese).