Bond strength of glass fiber-reinforced polymer bars in concrete after exposure to elevated temperatures
Source abstract
Abstract
This paper presents the test results of an experimental study to investigate the effect of elevated temperatures on the bond properties of glass fiber-reinforced polymer bars in concrete. For this purpose, a total of 39 pullout specimens with glass fiber-reinforced polymer bars were cast for bond strength tests. In addition to the laboratory temperature, specimens were exposed to heating regimes of 100, 200, 300 and 350℃ for a period of 1, 2 or 3 h. The test results are presented in terms of bond strength, bond–slip relationship, and mode of failure. All specimens failed by shearing of the concrete corbels surrounding the bars and almost no damage was seen in the glass fiber-reinforced polymer bars. The results showed that the bond strength decreased as the temperature or exposure period increased. Reductions of about 20% of the original bond strength were recorded after exposure to 100 and 200℃ for 3 h. Significant reductions of about 50% in the bond strength were recorded after exposure to 350℃ for periods of 2 and 3 h. A modification to the ACI (American Concrete Institute) and CEB-FIP (Comité Euro-International du Béton-Fédération Internationale de la Précontrainte) equations was developed to consider the effect of elevated temperatures and it showed good agreement with test results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil and Architectural Engineering, Sultan Qaboos University, Muscat, Sultanate of Oman
References (38)
Show source-provided references
1. El-Gamal SE · ACI Struct J · 2005 · 102 · 727
2. 10.1016/j.conbuildmat.2010.06.10310.1016/j.conbuildmat.2010.06.103 ↗
3. 10.1016/j.compositesb.2012.01.03410.1016/j.compositesb.2012.01.034 ↗
4. Committee 440 ACI · 2006
5. Tepfers R. Bond of FRP reinforcement in concrete: a state-of-the-art in preparation. American Concrete Institute (ACI) , SP-180 , s ymposium on bond and development of reinforcement , 1998, pp.493–508.
6. Kettil P. Composite beams of fibre reinforced plastic profile and concrete . Thesis, Chalmers University of Technology, Goteborg, Germany, 1995.
7. Achillides Z, Pilakoutas K and Waldron P. Bond behaviour of FRP to concrete. In: Third international symposium on non-metallic (FRP) reinforcement for concrete structures , Japan Concrete Institute, Sapporo, Japan, Vol. 2, October 1997, pp.341–348.
8. Al-Zahrani M. Bond behavior of fiber-reinforced plastic reinforcements with concrete . PhD Thesis, Pennsylvania State University, USA, 1995.
9. Benmokrane B · ACI Mater J · 1996 · 93 · 246
10. Tighiouart B, Benmokrane B and Gao D. Investigation on the bond of fiber-reinforced polymer (FRP) rebars in concrete. In: Proceedings of the second international conference on composites in infrastructure , Tucson, Arizona, USA, 1998, pp.102–112.
11. 10.1061/(ASCE)1090-0268(1997)1:2(40)10.1061/(ASCE)1090-0268(1997)1:2(40) ↗
12. Larrelde J, Mueller J, Schneider T, et al. Bond strength of steel, AFRP and GFRP bars in concrete. In: Proceedings of the ICCI’98, second international conference on composites in infrastructure , Tucson (AZ), USA, January 1998, pp.92–101.
13. 10.1061/(ASCE)1090-0268(2004)8:2(173)10.1061/(ASCE)1090-0268(2004)8:2(173) ↗
14. Malvar LJ. Bond stress–slip characteristics of FRP rebars . Report TR-2013-SHR. Port Hueneme, CA, USA, 1994.
15. 10.1016/j.conbuildmat.2010.12.05410.1016/j.conbuildmat.2010.12.054 ↗
16. Achillides Z. Bond behavior of FRP bars in concrete. PhD Thesis, University of Sheffield, UK, 1998.
17. 10.1016/j.cemconcomp.2008.05.00610.1016/j.cemconcomp.2008.05.006 ↗
18. 10.1061/(ASCE)1090-0268(2005)9:3(203)10.1061/(ASCE)1090-0268(2005)9:3(203) ↗
19. 10.1016/j.compositesb.2007.03.00810.1016/j.compositesb.2007.03.008 ↗
20. Porter ML and Barnes BA. Accelerated aging degradation of glass fiber composites. In: Proceedings of 2nd international conference on composite in infrastructure , Tucson, Arizona; USA, 1998, pp.446–495.
21. Bakis CE, Freimanis AJ, Gremel D, et al. Effect of resin material on bond and tensile properties of unconditioned and conditioned FRP reinforcement rods. In: Proceedings of the 1st international conference on durability of fiber-reinforced polymer (FRP) composites for construction . (ed B Benmokrane), Sherbrooke, Canada, 1998, pp.403–413.
22. 10.1016/j.cemconcomp.2010.02.01010.1016/j.cemconcomp.2010.02.010 ↗
23. 10.1016/j.compositesb.2005.01.00610.1016/j.compositesb.2005.01.006 ↗
24. 10.1016/j.compositesa.2005.05.04310.1016/j.compositesa.2005.05.043 ↗
25. 10.1016/j.conbuildmat.2009.12.04010.1016/j.conbuildmat.2009.12.040 ↗
26. Kumahara S, Masuda Y and Tanano Y. Tensile strength of continuous fiber bar under high temperature. In: Proceeding of the international symposium on fiber-reinforced-plastic reinforcement for concrete structures , ACI SP-138, 1993, pp.731–742.
27. Nause I. Determination of temperature-dependent tensile strengths of ComBAR reinforcement bars. Report of the Brunswick institute for concrete material testing. Report no. 072/05-Nau-3740/6345, 2005, MPA Braunschweig, Germany.
28. 10.1016/j.compstruct.2006.04.06910.1016/j.compstruct.2006.04.069 ↗
29. 10.1061/(ASCE)CC.1943-5614.000009210.1061/(ASCE)CC.1943-5614.0000092 ↗
30. Blontrock H, Taerwe L and Matthys S. Properties of fiber-reinforced plastics at elevated temperatures with regard to fire resistance of reinforced concrete members. In: Proceedings of 4th international symposium on fiber-reinforced polymer reinforcement for reinforced concrete structures, ACI SP 1999, 188, pp.44–54.
31. 10.1061/(ASCE)1090-0268(1999)3:2(73)10.1061/(ASCE)1090-0268(1999)3:2(73) ↗
32. Weber A. Bond properties of a newly developed composite rebar. In: Proceedings of the international symposium on bond behaviour of FRP in structures (BBFS 2005) (eds Chen and Teng), Hong Kong, China, 7–9 December 2005.
33. ACI Committee 440 · 2004
34. CSA S806 · 2012
35. Schock ComBAR. Technical information, http://www.schoeck-combar.com/comb/combar-gfrp-reinforcement/combar–184 (2013, accessed 21 July 2014).
36. ISIS. Reinforcing concrete structures with fibre reinforced polymers, Design Manual No. 3. Canadian network of centres of excellence on intelligent sensing for innovative structures, Winnipeg, 2001.
37. 10.1016/S0958-9465(00)00043-310.1016/S0958-9465(00)00043-3 ↗
38. Greszczuk L. Theoretical studies on the mechanism of the fiber-matrix interface in composites. Interfaces in composites. ASTM STP 452. West Conshohocken: ASTM, pp.42–58.10.1520/STP44699S ↗