Experimental analysis of composite single-lap joints using digital image correlation and comparison with theoretical models
Source abstract
Abstract
The demand for energy efficient, low weight structures has boosted the use of composite structures assembled using increased quantities of structural adhesives. Bonded structures may be subjected to severe working environments such as high temperature and moisture due to which the adhesive gets degraded over a period of time. This reduces the strength of a joint and leads to premature failure. Measurement of strains in the adhesive bondline at any point of time during service may be beneficial as an assessment can be made on the integrity of a joint and necessary preventive actions may be taken before failure. This paper presents an experimental approach of measuring peel and shear strains in the adhesive bondline of composite single-lap joints using digital image correlation. Different sets of composite adhesive joints with varied bond quality were prepared and subjected to tensile load during which digital images were taken and processed using digital image correlation software. The measured peel strain at the joint edge showed a rapid increase with the initiation of a crack till failure of the joint. The measured strains were used to compute the corresponding stresses assuming a plane strain condition and the results were compared with stresses predicted using theoretical models, namely linear and nonlinear adhesive beam models. A similar trend in stress distribution was observed. Further comparison of peel and shear strains also exhibited similar trend for both healthy and degraded joints. Maximum peel stress failure criterion was used to predict the failure load of a composite adhesive joint and a comparison was made between predicted and actual failure loads. The predicted failure loads from theoretical models were found to be higher than the actual failure load for all the joints.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Optical measurement and interference techniques · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Aerospace Engineering, Indian Institute of Science, Bangalore, India
References (37)
Show source-provided references
1. 10.1163/15685610376286465110.1163/156856103762864651 ↗
2. 10.1016/S1359-8368(02)00066-510.1016/S1359-8368(02)00066-5 ↗
3. 10.1016/S0263-8223(01)00090-310.1016/S0263-8223(01)00090-3 ↗
4. 10.1016/j.compstruct.2005.01.02310.1016/j.compstruct.2005.01.023 ↗
5. 10.1016/0263-8223(95)00059-310.1016/0263-8223(95)00059-3 ↗
6. 10.1016/0010-4361(93)90017-310.1016/0010-4361(93)90017-3 ↗
7. 10.1016/j.compstruct.2008.11.00210.1016/j.compstruct.2008.11.002 ↗
8. 10.1016/0263-8223(95)00059-310.1016/0263-8223(95)00059-3 ↗
9. 10.1243/03093247JSA18010.1243/03093247JSA180 ↗
10. American Society for Testing and Materials · Annu Book ASTM Standards · 2004 · 15 · 1
11. American Society for Testing and Materials · Annu Book of ASTM Standards · 2004 · 15 · 1
12. Sutton MA · 2009
13. Colavito KW, Gorman J and Madenci E. Refinements in digital image correlation technique to extract adhesive strains in lap joints. In: 50th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference, Palm Springs, CA, 4–7 May 2009.10.2514/6.2009-2504 ↗
14. Cognard JY, Davies P and Sohier L. Design and evaluation of bonded composite assemblies. In: European congress on computational methods in applied sciences and engineering, ECCOMAS , Jyväskylä, Finland, 24–28 July 2004.
15. 10.1016/j.compositesa.2010.01.00310.1016/j.compositesa.2010.01.003 ↗
16. 10.1016/j.ijadhadh.2013.01.00410.1016/j.ijadhadh.2013.01.004 ↗
17. Volkersen O · Luftfahrtforschung · 1938 · 15 · 41
18. 10.1115/1.400933610.1115/1.4009336 ↗
19. Hart-Smith LJ. Analysis and design of advanced composite bonded joints . NASA contract report NASA TR-11234, McDonnell Douglas Corporation, California, August 1974.
20. 10.1080/0021846750807504910.1080/00218467508075049 ↗
21. 10.1177/00219983810150030510.1177/002199838101500305 ↗
22. 10.1115/1.344314610.1115/1.3443146 ↗
23. 10.1016/0961-9526(93)90020-K10.1016/0961-9526(93)90020-K ↗
24. 10.1061/(ASCE)0733-9399(1999)125:11(1298)10.1061/(ASCE)0733-9399(1999)125:11(1298) ↗
25. 10.1163/156856108X33602610.1163/156856108X336026 ↗
26. 10.1163/156856108X33603510.1163/156856108X336035 ↗
27. 10.1016/S0266-3538(02)00030-110.1016/S0266-3538(02)00030-1 ↗
28. 10.1177/002199830403926810.1177/0021998304039268 ↗
29. 10.1016/j.compstruct.2004.01.00710.1016/j.compstruct.2004.01.007 ↗
30. 10.2514/1.1566410.2514/1.15664 ↗
31. 10.1016/j.ijsolstr.2008.07.00110.1016/j.ijsolstr.2008.07.001 ↗
32. 10.1016/j.ijsolstr.2006.07.00910.1016/j.ijsolstr.2006.07.009 ↗
33. 10.1016/j.ijadhadh.2005.09.00510.1016/j.ijadhadh.2005.09.005 ↗
34. 10.1115/1.342397110.1115/1.3423971 ↗
35. 10.1080/0021846890804820710.1080/00218468908048207 ↗
36. 10.1115/1.322567710.1115/1.3225677 ↗
37. 10.1016/0263-8223(85)90003-010.1016/0263-8223(85)90003-0 ↗