journal article·2003-07

Studies on Impact Damage Resistance of Affordable Stitched Woven Carbon/Epoxy Composite Laminates

M. V. Hosur, M. Adya, J. Alexander, S. Jeelani, U. Vaidya, A. Mayer

Publisher page

Abstract

This paper discusses the response of seven layer plain and satin weave carbon fabric reinforced composites fabricated using low-cost Vacuum Assisted Resin Infusion Molding (VARIM) process under low-velocity impact loading. Both stitched and unstitched laminates were tested at energy levels ranging 5-50 J using an instrumented drop-weight machine. A 3-cord Kevlar thread was used to stitch the laminate in two orthogonal grid patterns each at a 6 mm pitch: one with 25.4 mm and the other with 12.7 mm grid. Damage due to impact loading was evaluated through ultrasonic nondestructive evaluation (NDE). Results of the study showed the effectiveness of stitching in containing the damage size with 12.7 mm grid stitch samples exhibiting the least damage. Further, satin weave fabric composites exhibit better impact resistance as compared to plain weave fabric composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Center for Advanced Materials Tuskegee University Tuskegee, AL 36088, USA

Department of Materials and Mechanical Engineering The University of Alabama at Birmingham Birmingham, AL 35294-4461, USA

Structural Design and Development Branch (VASD) Air Force Research Laboratory Wright Patterson Air Force Base, OH 45433-7531, USA

References (33)

Show source-provided references
1. 10.1115/1.311950010.1115/1.3119500 ↗
2. 10.1016/0010-4361(91)90549-V10.1016/0010-4361(91)90549-V ↗
3. 3. Cordell, T.M. and Sjoblom, P.O. (1986). In: Proceedings of American Society for Composites, Damage Tolerance of Composites, First Technical Conference, Oct. Dayton, Ohio, pp. 297-312 , Technomic Publishing Co. Inc., Pennsylvania, USA.
4. 10.1515/SECM.1989.1.2.4110.1515/SECM.1989.1.2.41 ↗
5. 5. Elber, W. (1983). Failure Mechanics in Low-Velocity Impacts on Thin Composite Plates, NASA Technical Paper 2152.
6. 10.1177/00219983880220060210.1177/002199838802200602 ↗
7. 10.1177/00219983940280100410.1177/002199839402801004 ↗
8. 10.1016/0263-8223(93)90172-M10.1016/0263-8223(93)90172-M ↗
9. 10.1016/0010-4361(93)90043-810.1016/0010-4361(93)90043-8 ↗
10. 10.1016/0263-8223(93)90015-I10.1016/0263-8223(93)90015-I ↗
11. 10.1016/0010-4361(90)90423-T10.1016/0010-4361(90)90423-T ↗
12. 10.1177/00219983880220080410.1177/002199838802200804 ↗
13. 13. Hosur, M.V., Murthy, C.R.L. and Ramamurthy, T.S. (1999). Journal of Composites Technology and Research, 51-64 .
14. 14. Huang, S.L., Richey, R.J. and Deska, E.W. (1978). Paper Presented at ASME, Winter Annual Meeting, San Francisco, USA.
15. 15. Mignery, L.A., Sun, C.T. and Tan, T.M. (1985). ASTM STP 876, 371-385.10.1520/STP36315S ↗
16. 10.1177/00219983940280160410.1177/002199839402801604 ↗
17. 10.1016/0266-3538(94)90019-110.1016/0266-3538(94)90019-1 ↗
18. 18. Mouritz, A.P. and Cox, B.N. (2000). Composites, Part A, 31: 1-27 .10.1016/S1359-835X(99)00056-1 ↗
19. 10.1016/S1359-835X(97)00057-210.1016/S1359-835X(97)00057-2 ↗
20. 20. Dexter, H.B. (1996). Society for the Advancement of Materials and Process Engineering, pp. 404-416.
21. 10.1016/0266-3538(95)00089-510.1016/0266-3538(95)00089-5 ↗
22. 10.1016/0266-3538(93)90056-M10.1016/0266-3538(93)90056-M ↗
23. 10.1177/07316844920110070510.1177/073168449201100705 ↗
24. 10.1177/07316844900090010410.1177/073168449000900104 ↗
25. 25. Munjal, A.K. (1987). ASM International, pp. 53-56.
26. 26. Bersuch, L., Benson, R. and Owens, S. (1998). Society for the Advancement of Materials and Process Engineering, Materials and Process Affordability: Keys to the Future, 43(I): 56-65 .
27. 27. Dexter, H.B. and Maiden, J. (1988). NASA Publication, pp. 91-113.
28. 28. Schwartz, M.M. (1996). Composite Materials - Processing, Fabrication and Applications, Vol. II, Prentice-Hall Publishers .
29. 10.1177/00219983980320080110.1177/002199839803200801 ↗
30. 30. Naik, N.K. and Chandra Sekher, Y. (1998). Journal of Reinforced Plastics and Composites, 17(14): 1222-1263 .10.1177/073168449801701401 ↗
31. 10.1106/X80M-4UEF-CPPK-M15E10.1106/X80M-4UEF-CPPK-M15E ↗
32. 10.1106/7FWA-3VLF-TTUT-JAEA10.1106/7FWA-3VLF-TTUT-JAEA ↗
33. 33. Walsh, T.F., Lee, B.L. and Song, J.W. (1996). In: Proceedings for the American Society for Composites, Atlanta, GA, USA, pp. 979-988 .