Effects of Compatibilizers on Mechanical Properties of Long Glass Fiber-Reinforced Polypropylene
Source abstract
Abstract
Long glass fiber-reinforced polypropylene was prepared with the self-designed impregnation device. Main properties (like mechanical properties), average fiber length, fiber orientation, and morphology of LFPP with three different compatibilizers including octane—ethylene copolymer, maleic anhydride grafted octane—ethylene copolymer. Maleic anhydride grafted polypropylene were investigated on injection molding bars. Results showed that the addition of POE led to decrease in tensile strength. PP-g-MAH and POE-g-MAH improved the adhesion between glass fiber and polypropylene. These compatibilizers could increase the average fiber length and weaken the dispersion of glass fiber in matrix. It was also observed from scanning electron microscope that these compatibilizers had different adhesion effects which were evaluated as follows: PP-g-MAH>POE-g-MAH>POE.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Chemistry, Sichuan University, Chengdu 610064, China
College of Chemistry, Sichuan University, Chengdu 610064, China,
References (21)
Show source-provided references
1. Schemme, M. · Kunststoffe · 2003 · 93 · 106
2. Henning, F. · Plast. · 2005 · 49 · 24
3. 10.1002/pc.75010020410.1002/pc.750100204 ↗
4. 10.1016/S1359-835X(96)00127-310.1016/S1359-835X(96)00127-3 ↗
5. Wolf, H.J. · Compos. · 1994 · 15 · 375
6. 10.1002/pen.76023130910.1002/pen.760231309 ↗
7. Bigg, D.M. · Compos. · 1985 · 6 · 20
8. 10.1002/pc.1034710.1002/pc.10347 ↗
9. Skourlis, T.P. · Eng. Sci. · 1998 · 38 · 79
10. Thomason, J.L. · Injection Moulded Long and Short fibre PP, Compos. A · 2002 · 33 · 1641
11. Thomason, J.L. · The Properties of Injection Moulded Long Fibre PP at High Fibre Content, Compos. A · 2005 · 36 · 995
12. Thomason, J.L. · Interface Strength and Fibre Strain in Injection Moulded Long Fibre PP at High Fibre Content, Compos. A · 2007 · 38 · 210
13. Kumar, S.K. · Compos. · 2007 · 28 · 259
14. 10.1002/adv.2003510.1002/adv.20035 ↗
15. Greenkon, R.A. · 1992
16. Ahn, K.J. · Compos. · 1991 · 12 · 146
17. 10.1002/mame.20050005110.1002/mame.200500051 ↗
18. 10.1016/1359-835X(95)00065-A10.1016/1359-835X(95)00065-A ↗
19. Thomason, J.L. · Strength and Strain at Failure, Compos. A · 1996 · 27 · 1075
20. 10.1016/S0266-3538(02)00097-010.1016/S0266-3538(02)00097-0 ↗
21. 10.1016/S0032-3861(03)00438-510.1016/S0032-3861(03)00438-5 ↗