Fabrication and electrical discharge machining of metal–matrix composites: A review
Source abstract
Abstract
Processability of metal matrix composite depends upon the appropriately chosen elements, their properties, distributions and interface between them. The ductile property of matrix embedded with ceramics reinforced particles serves to reduce the coefficient of thermal expansion and increase strength and modulus. High tool cost in traditional machining process results in limiting the application of these materials in advance technologies; hence, electric discharge machining process is a widely accepted machining option for geometrically complex-shaped components. This article presents the basic selection of elements and fabrication methods of metal matrix composites and further reviews the research work carried in the field of electric discharge machining to explore ways to improve the efficiency of the machining process. Finally, the research works carried out to measure the residual stress are also addressed, followed by concluding remarks and future scopes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, Thapar University, Patiala, Punjab, India
Mechanical Engineering Department, PEC, Chandigarh, India
References (86)
Show source-provided references
1. http://en.wikipedia.org/wiki/Mongol_bow (2013).
2. 10.1007/s00170-009-2453-510.1007/s00170-009-2453-5 ↗
3. 10.1007/978-1-84882-831-510.1007/978-1-84882-831-5 ↗
4. 10.1007/s12206-012-0436-110.1007/s12206-012-0436-1 ↗
5. 10.1007/s12206-012-0522-410.1007/s12206-012-0522-4 ↗
6. Basavarajappa S · J Mech Sci Technol · 2005 · 21 · 845
7. 10.1002/352760811710.1002/3527608117 ↗
8. 10.1007/BF0271714110.1007/BF02717141 ↗
9. 10.1039/JM996060046910.1039/JM9960600469 ↗
10. Seo YW, Kim D and Ramulu M. Electric discharge machining of functionally graded 15-35Vol% SiC/Al composite. Mater Manuf Process 21 (2006) 479–487.10.1080/10426910500471482 ↗
11. Singh NP, Raghukandan K, Rathinasabapathi M and Pai BC. Electric discharge machining of Al-10%SiC as-cast metal matrix composite. J Mater Process Technol 155–156 (2004) 1653–1657.10.1016/j.jmatprotec.2004.04.321 ↗
12. Kumar S, Singh R, Singh TP and Sethi BL. Surface modification by electric discharge machining: a review. J Mater Process Technol 209 (2009) 3675–3687.10.1016/j.jmatprotec.2008.09.032 ↗
13. Ho KH and Newman ST. State of the art electric discharge machining (EDM). Int J Mach Tools Manuf 43 (2003) 1287–1300.10.1016/S0890-6955(03)00162-7 ↗
14. Norasetthekul S, Eubank PT, Bradley WL, et al. Use of zirconium diboride-copper as an electrode in plasma applications. J Mater Sci 34 (1999) 1048–1270.10.1023/A:1004529527162 ↗
15. 10.1016/j.jmatprotec.2005.02.21110.1016/j.jmatprotec.2005.02.211 ↗
16. 10.1016/S0079-6425(00)00006-210.1016/S0079-6425(00)00006-2 ↗
17. 10.1007/BF0267029210.1007/BF02670292 ↗
18. 10.1016/S0263-8223(01)00072-110.1016/S0263-8223(01)00072-1 ↗
19. 10.1111/j.1151-2916.1989.tb07660.x10.1111/j.1151-2916.1989.tb07660.x ↗
20. 10.1016/j.ijmachtools.2009.09.00410.1016/j.ijmachtools.2009.09.004 ↗
21. 10.1080/1042691090276928510.1080/10426910902769285 ↗
22. 10.1111/j.1151-2916.1991.tb06928.x10.1111/j.1151-2916.1991.tb06928.x ↗
23. 10.2320/jinstmet1952.58.12_146710.2320/jinstmet1952.58.12_1467 ↗
24. 10.1016/S0924-0136(96)00012-X10.1016/S0924-0136(96)00012-X ↗
25. 10.1016/S0924-0136(96)02730-610.1016/S0924-0136(96)02730-6 ↗
26. 10.1080/1042691050047148210.1080/10426910500471482 ↗
27. 10.2320/matertrans.43.19910.2320/matertrans.43.199 ↗
28. 10.1016/j.jmapro.2010.10.00510.1016/j.jmapro.2010.10.005 ↗
29. 10.1016/j.proeng.2012.06.08610.1016/j.proeng.2012.06.086 ↗
30. 10.1007/s00170-007-1002-310.1007/s00170-007-1002-3 ↗
31. 10.1016/j.ijrmhm.2009.04.00510.1016/j.ijrmhm.2009.04.005 ↗
32. 10.1016/S0924-0136(02)00202-910.1016/S0924-0136(02)00202-9 ↗
33. 10.1016/j.jmatprotec.2004.04.34710.1016/j.jmatprotec.2004.04.347 ↗
34. 10.1016/0043-1648(81)90148-410.1016/0043-1648(81)90148-4 ↗
35. 10.1016/j.jmatprotec.2006.10.04610.1016/j.jmatprotec.2006.10.046 ↗
36. 10.1016/j.jmatprotec.2003.11.04610.1016/j.jmatprotec.2003.11.046 ↗
37. 10.1016/S0890-6955(99)00062-010.1016/S0890-6955(99)00062-0 ↗
38. 10.1016/S0890-6955(97)00006-010.1016/S0890-6955(97)00006-0 ↗
39. 10.1023/A:100452952716210.1023/A:1004529527162 ↗
40. 10.1016/j.jmatprotec.2006.09.03410.1016/j.jmatprotec.2006.09.034 ↗
41. 10.1016/S0890-6955(02)00238-910.1016/S0890-6955(02)00238-9 ↗
42. 10.1016/j.surfcoat.2005.03.02210.1016/j.surfcoat.2005.03.022 ↗
43. 10.1016/j.corsci.2007.05.00910.1016/j.corsci.2007.05.009 ↗
44. 10.1016/S0924-0136(98)00332-X10.1016/S0924-0136(98)00332-X ↗
45. 10.1016/j.jmatprotec.2007.03.12110.1016/j.jmatprotec.2007.03.121 ↗
46. 10.1080/10426914.2013.76395810.1080/10426914.2013.763958 ↗
47. 10.1016/S0924-0136(97)00263-X10.1016/S0924-0136(97)00263-X ↗
48. 10.1007/s00170-004-2175-710.1007/s00170-004-2175-7 ↗
49. 10.1016/S0924-0136(96)00033-710.1016/S0924-0136(96)00033-7 ↗
50. 10.1007/s00170-005-0169-810.1007/s00170-005-0169-8 ↗
51. 10.1115/1.283312710.1115/1.2833127 ↗
52. Indurkhya G · Intell Eng Syst Artif Neural Netw USA · 1992 · 2 · 845
53. 10.1081/AMP-20005503310.1081/AMP-200055033 ↗
54. 10.1007/3-540-31662-0_2710.1007/3-540-31662-0_27 ↗
55. 10.1016/S0007-8506(07)62299-910.1016/S0007-8506(07)62299-9 ↗
56. 10.1016/S0890-6955(99)00121-210.1016/S0890-6955(99)00121-2 ↗
57. 10.1016/0924-0136(94)90435-910.1016/0924-0136(94)90435-9 ↗
58. De Silva A and Ranke J. Electric discharge machining of metal matrix composite. In: Proceeding of international symposium for electro machining , Switzerland, 1995, pp.75–84.
59. Roux TLe · J Process Adv Mater · 1993 · 3 · 233
60. 10.1002/9780470294437.ch2510.1002/9780470294437.ch25 ↗
61. Thomson PF. Surface damage in electro-discharge machining. J Mater Sci Technol 1989; 5: 1153–1157.10.1179/mst.1989.5.11.1153 ↗
62. 10.1016/0924-0136(90)90212-D10.1016/0924-0136(90)90212-D ↗
63. Osgood WR · 1954
64. 10.1179/02670830110150998010.1179/026708301101509980 ↗
65. Crookall JR and Khor BC. Residual stresses and surface effects in electro-discharge machining. In: Proceedings of 13th international machine tool design and research conference , Birmingham, 1972, pp.331–338.10.1007/978-1-349-01857-4_49 ↗
66. Lloyd HK · J Iron Steel Inst · 1965 · 203 · 238
67. Barash M and Sri MG-Ram. Some properties of spark machined heat treated steel. In: Proceedings of third international machine tool design and research conference , Birmingham, 1962, pp.85–91.
68. Konig W · CIRP Ann · 1975 · 24 · 95
69. 10.1016/S0007-8506(07)61694-110.1016/S0007-8506(07)61694-1 ↗
70. 10.1016/S0924-0136(98)00082-X10.1016/S0924-0136(98)00082-X ↗
71. 10.1016/S0924-0136(03)00572-710.1016/S0924-0136(03)00572-7 ↗
72. 10.2526/ijem.5.2310.2526/ijem.5.23 ↗
73. 10.1016/j.apsusc.2007.05.07810.1016/j.apsusc.2007.05.078 ↗
74. Ll XS · Mater Sci Forum · 2012 · 697 · 171
75. 10.1081/MST-20005124410.1081/MST-200051244 ↗
76. 10.1016/S0924-0136(03)00624-110.1016/S0924-0136(03)00624-1 ↗
77. Biswas CK · Adv Mater Res · 2012 · 383 · 872
78. 10.1016/j.ijpvp.2007.10.00710.1016/j.ijpvp.2007.10.007 ↗
79. 10.1016/j.cirp.2011.05.00210.1016/j.cirp.2011.05.002 ↗
80. 10.1016/0956-7151(92)90460-V10.1016/0956-7151(92)90460-V ↗
81. 10.1016/0025-5416(87)90249-710.1016/0025-5416(87)90249-7 ↗
82. 10.1016/S0921-5093(96)10845-510.1016/S0921-5093(96)10845-5 ↗
83. 10.1016/S0167-577X(02)01436-210.1016/S0167-577X(02)01436-2 ↗
84. 10.1023/B:JMSC.0000021482.15837.fc10.1023/B:JMSC.0000021482.15837.fc ↗
85. 10.1016/S0921-5093(96)10461-510.1016/S0921-5093(96)10461-5 ↗
86. 10.1016/0921-5093(89)90392-410.1016/0921-5093(89)90392-4 ↗