Static behavior of three-dimensional ıntegrated core sandwich composites subjected to three-point bending
Source abstract
Abstract
In the current study, the effect of the thickness and the foam density in three-dimensional integrated woven sandwich composites on quasi-static mechanical properties under three-point bending was investigated. Bending modulus and core shear modulus were determined by subjecting the samples, which were cut with varying span lengths according to their core thicknesses, to three-point bending test. Obtained results were optimized by taking core thickness, foam density and panel weights into consideration. Damages that occurred on the tested samples were reported. When compared to conventional foam core sandwich composites, it was found that three-dimensional integrated sandwich composites have superior mechanical properties and due to the fact that the pile yarns in the core and the foam support each other, contrary to conventional sandwich composites no catastrophic core breakage occurs under load, thus the load bearing capacity of the structure is sustained.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Mechanical Behavior of Composites · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Uludag Vocational School of Technical Sciences, Gorukle Bursa Turkey
University of Leuven, Dept. Of Metallurgy and Materials Engineering, Leuven, Belgıum
University of Leuven – Thomas More, Department of Engineering Technology, Sint-Katelijne-Waver, Belgıum
References (38)
Show source-provided references
1. 10.1016/j.compositesa.2009.03.01210.1016/j.compositesa.2009.03.012 ↗
2. 10.1016/j.compositesa.2009.04.03210.1016/j.compositesa.2009.04.032 ↗
3. 10.1177/004051750934644110.1177/0040517509346441 ↗
4. Karahan M, Ulcay Y, Karahan N, et al. Influence of stitching parameters on tensile stregth of aramid/vinyl ester composites. Mater Sci (Medziagotyra) 2012 (in press).10.5755/j01.ms.19.1.3829 ↗
5. Barrett DJ. A micromechanical model for the analysis of Z-fiber reinforcement. In: AIAA/ASCE/ASME/AHS SDM Conference , Salt Lake City, Utah, 1996, AIAA-96-1329-CP, pp.62–67.
6. ZCL Composites Inc. Company Literature. ST. Edmonton, AB. Canada, 1998.
7. 10.1016/S1359-835X(00)00025-710.1016/S1359-835X(00)00025-7 ↗
8. 10.1016/S0266-3538(00)00070-110.1016/S0266-3538(00)00070-1 ↗
9. 10.1179/14658019910154062810.1179/146580199101540628 ↗
10. Van Vuure AW, Ivens J and Verpoest I. Sandwich panels produced from sandwich-fabric preforms. In: Proceedings of the International Symposium on Advanced Materials for Lightweight Structures'94 , ESA_ESTEC , Noordwijk, Netherlands, 22–25 March 1994, pp.609–612.
11. Van Vuure AW, Ivens J and Verpoest I. Sandwich-fabric panels. In: Proceedings of the 40th International SAMPE Symposium and Exhibition. Anaheim , USA , 1995, pp.966–76.
12. Verpoest I, Wevers M, Ivens J, et al. 3D Fabrics for compression and ımpact resistant composite sandwich structures. In: Proceedings of the 35th International SAMPE Symposium , Anaheim, California, 2–5 April 1990, pp.296–305.
13. 10.1080/0040500900865872310.1080/00405009008658723 ↗
14. Karahan M, Karahan N, Gül H, et al. Static behavior of three-dimensional integrated core sandwich composites under compression loading. J Reinf Plast Compos 2012 (in press).10.1177/0731684412471091 ↗
15. 10.1016/S0263-8223(00)00035-010.1016/S0263-8223(00)00035-0 ↗
16. 10.1177/089270570403541010.1177/0892705704035410 ↗
17. 10.1177/073168440810069710.1177/0731684408100697 ↗
18. 10.1016/j.matdes.2009.06.03910.1016/j.matdes.2009.06.039 ↗
19. 10.1016/0266-3538(95)00135-210.1016/0266-3538(95)00135-2 ↗
20. 10.1016/S1359-835X(00)00017-810.1016/S1359-835X(00)00017-8 ↗
21. 10.1016/S1359-8368(00)00041-X10.1016/S1359-8368(00)00041-X ↗
22. 10.1016/S0263-8223(98)00093-210.1016/S0263-8223(98)00093-2 ↗
23. 10.1016/S1359-835X(00)00025-710.1016/S1359-835X(00)00025-7 ↗
24. 10.1177/004051751243683210.1177/0040517512436832 ↗
25. Zhou GM · J Nanjing Univ Aeronaut Astronaut · 2007 · 39 · 11
26. 10.12989/sem.2001.12.2.16910.12989/sem.2001.12.2.169 ↗
27. 10.1016/S0020-7683(00)00025-110.1016/S0020-7683(00)00025-1 ↗
28. 10.1016/j.compositesa.2010.05.01410.1016/j.compositesa.2010.05.014 ↗
29. 10.1016/j.compositesb.2010.07.00410.1016/j.compositesb.2010.07.004 ↗
30. Soares B, Reis L and Silva A. Testing of sandwich structures with cork agglomerate cores. In: Ferreira AJM (ed.) Proceeding of 8th International Conference of Sandwich Structures (ICSS8) , Porto, Portugal, 6-8 May 2008, pp.451–462.
31. 10.1177/002199830505203710.1177/0021998305052037 ↗
32. 10.1016/j.compstruct.2006.10.00710.1016/j.compstruct.2006.10.007 ↗
33. Steeves CA and Fleck NA. Collapse mechanism of sandwich beams with composite faces and a foam core, loaded in three-point bending. Part 1: analytical models and minimum weight design. Int J Mech Sci 2004; 46(4): 561–583.10.1016/j.ijmecsci.2004.04.003 ↗
34. Vinson JR · 1999
35. 10.1016/j.finel.2007.08.00510.1016/j.finel.2007.08.005 ↗
36. Brooks R, Brown KA, Warrior AN, et al. Predictive modelling of the impact response of thermoplastic composites sandwich structures. In: Ferreira AJM (ed.) 8th International Conference of Sandwich Structures (ICSS8) , Porto, Portugal, 6–8 May 2008, pp.1157–1168.
37. 10.1177/002199830404476010.1177/0021998304044760 ↗
38. 10.1177/00219983000340090410.1177/002199830003400904 ↗