The interaction between the cutting force and induced sub-surface damage in machining of carbon fiber-reinforced plastics
Source abstract
Abstract
Carbon fiber-reinforced plastics (CFRPs) have the characteristics of non-homogeneity and anisotropy. Damage occurs frequently in machining of CFRPs, and it can seriously influence the performance of work piece. This study builds a finite element model for machining of CFRPs based on the constitutive relation with damage, the Hashin failure criterion, and the damage evolution. The continuous cutting processes of unidirectional CFRPs with various fiber orientations are simulated. Cutting forces and sub-surface damage are determined from simulations. Furthermore, machining experiments on unidirectional-CFRPs are performed. Cutting processes are monitored, and cutting forces are measured. An artificial neural network (ANN) force model is proposed by using the experimental data, and then simulation results of the cutting forces are validated by these of the ANN model. Cutting force increases when the fiber orientation varies from 0° to 135°. Fiber orientation is the critical factor affecting the cutting force and the sub-surface damage. More sub-surface damage occurs in a fiber orientation range of 90–135°. The primary reasons for the induced sub-surface damage include the damage evolution and the crack propagation of matrix caused by the cutting force. In addition, the effects of cutting parameters and tool geometries on the cutting force and the damage are discussed by simulations. The cutting force thus can be reasonably controlled to reduce the damage.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Manufacturing Process and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Dalian University of Technology, Dalian 116024, China
References (24)
Show source-provided references
1. 10.1016/j.ijmecsci.2014.03.01710.1016/j.ijmecsci.2014.03.017 ↗
2. 10.1016/j.ijmachtools.2012.01.00610.1016/j.ijmachtools.2012.01.006 ↗
3. 10.1016/j.compstruct.2011.11.02410.1016/j.compstruct.2011.11.024 ↗
4. 10.1177/073168441244465310.1177/0731684412444653 ↗
5. 10.1007/978-0-387-68619-610.1007/978-0-387-68619-6 ↗
6. Koplev A and Bunsell AR. Cutting of CFRP with single edge tools. In: Proceedings of the 3rd International Conference on Advances in Composite Materials, Paris, 1980, pp. 1597–1605.10.1016/B978-1-4832-8370-8.50126-1 ↗
7. Kaneeda T · Trans N Am Manuf Res Inst SME · 1991 · 19 · 216
8. 10.1016/0890-6955(95)00014-O10.1016/0890-6955(95)00014-O ↗
9. 10.1016/0890-6955(95)93039-910.1016/0890-6955(95)93039-9 ↗
10. 10.1016/S0890-6955(03)00090-710.1016/S0890-6955(03)00090-7 ↗
11. 10.1016/S0020-7403(96)00061-610.1016/S0020-7403(96)00061-6 ↗
12. Aly M, Hamza K, Tauhiduzzaman M, et al. Multi-objective selection of cutting conditions in advanced machining processes via an efficient global optimization approach. In: ASME 2014 international design engineering technical conferences and computers and information in engineering conference , American Society of Mechanical Engineers, 2014.10.1115/DETC2014-34624 ↗
13. 10.1016/j.cirp.2009.03.10010.1016/j.cirp.2009.03.100 ↗
14. 10.1080/1091034050039818310.1080/10910340500398183 ↗
15. 10.1016/j.jmapro.2011.09.00510.1016/j.jmapro.2011.09.005 ↗
16. 10.1016/j.compscitech.2009.01.00410.1016/j.compscitech.2009.01.004 ↗
17. 10.1016/j.proeng.2011.04.30310.1016/j.proeng.2011.04.303 ↗
18. 10.1016/j.jmatprotec.2006.04.12610.1016/j.jmatprotec.2006.04.126 ↗
19. Sheikh-Ahmad JY · Mach Sci Technol · 2007 · 11 · 391
20. 10.1016/j.ijmachtools.2010.06.00510.1016/j.ijmachtools.2010.06.005 ↗
21. Karnik SR, Gaitonde VN, Mata F, et al. Investigative study on machinability aspects of unreinforced and reinforced PEEK composite machining using ANN model. J Reinforc Plas Compos 2008; 27(7): 751–768.10.1177/0731684407084259 ↗
22. 10.1115/1.402652610.1115/1.4026526 ↗
23. Khan, Zaffar M, et al. The drilling-induced failure mechanisms in T800/924C toughened carbon-epoxy composite materials. J Reinforc Plas Compos 2014; 33(2): 202–211.10.1177/0731684413503510 ↗
24. 10.1016/j.procir.2014.03.01310.1016/j.procir.2014.03.013 ↗