journal article·2010-08

Silica-Styrene-Butadiene Rubber Filled Hybrid Composites: Experimental Characterization and Modeling

Vinay Kumar Singh, Prakash Chandra Gope

Publisher page

Abstract

The mechanical behavior of epoxy matrix composites filled with nanosized silica particles and styrene-butadiene rubber is discussed. Scanning electron microscopy analysis and tensile test carried out at different crosshead speeds on the silica-styrene-butadiene rubber epoxy nanocomposites indicated the absence of particle aggregation and a reinforcing effect in terms of increased elastic modulus, yield, and ultimate strength. The results of wear test in pin-on-disc mode and hardness test on Rockwell R scale showed that the nanosized silica particles could improve the wear resistance of the epoxy matrix even though the content of the filler is at a relatively low level (1.0-2.0 wt%). This makes it possible to develop novel type of epoxy-based material with improved wear resistance for various applications. About 40-70% increase in impact strength has been noticed due to addition of 0.5-1.5 wt% of styrene-butadiene rubber in 1.0 wt% silica-filled epoxy composite. A good correlation between mechanical properties and weight contents of the filler materials, hardness and ultimate strength, and hardness and wear rate has been observed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department, College of Technology, G. B. Pant University of Agriculture & Technology, Pantnagar-263145 U.S. Nagar, Uttarakhand, India

Mechanical Engineering Department, College of Technology, G. B. Pant University of Agriculture & Technology, Pantnagar-263145 U.S. Nagar, Uttarakhand, India,

References (25)

Show source-provided references
1. May, C. A. · 1988
2. 10.1007/978-94-011-2932-910.1007/978-94-011-2932-9 ↗
3. 10.1016/S0026-2692(00)00104-X10.1016/S0026-2692(00)00104-X ↗
4. 10.1108/0036879011038399310.1108/00368790110383993 ↗
5. Nielsen, L.E. · 1994
6. Baraton, M.I. · 2002
7. Zheng, Y. · Lett. · 2003 · 57 · 2940
8. 10.1016/S0032-3861(03)00519-610.1016/S0032-3861(03)00519-6 ↗
9. 10.1023/A:101958141746510.1023/A:1019581417465 ↗
10. 10.1002/app.2185410.1002/app.21854 ↗
11. 10.1016/j.ijsolstr.2008.12.01110.1016/j.ijsolstr.2008.12.011 ↗
12. 10.1016/j.wear.2008.08.00510.1016/j.wear.2008.08.005 ↗
13. 10.1016/j.matdes.2008.05.00710.1016/j.matdes.2008.05.007 ↗
14. 10.1002/(SICI)1099-0488(19980415)36:5<789::AID-POLB6>3.0.CO;2-G10.1002/(SICI)1099-0488(19980415)36:5<789::AID-POLB6>3.0.CO;2-G ↗
15. Haiying, W. · Mater. · 2002 · 50 · 4369
16. Wetzel, B. · Sci. Technol. · 2003 · 63 · 2055
17. 10.1002/app.2068110.1002/app.20681 ↗
18. Shandilya, P. (2008). Characterization of Mechanical Properties and Statistical Modeling of Silica-Acrylic Rubber Hybrid Composite , Thesis, G.B.P.U.A & T, Pantnagar , pp. 33-48.
19. Neogi, C. · Rubber Process. Appl. · 1989 · 12 · 147
20. Chung, B. · Rubber World · 1991 · 204 · 46
21. Wang, M.J. · Chem. Technol. · 1998 · 71 · 520
22. Lake, G.J. · Rubber J. · 1964 · 146 · 24
23. 10.1016/j.clay.2007.12.00510.1016/j.clay.2007.12.005 ↗
24. Singh, V.K. ( 2002). Experimental Investigation of Mixed Mode Stress Field Parameters under Biaxial Loading Condition, Thesis, G.B.P.U.A & T, Pantnagar, pp. 34-77.
25. Durand, J.M. · Wear · 1995 · 181 · 837