Conventional and unconventional machining performance of natural fibre-reinforced polymer composites: A review
Source abstract
Abstract
Natural fibre composites are the promising replacement for synthetic fibre owing to their improved properties, and more importantly, natural fibres are biodegradable and of low cost. These characteristics have made them viable for contemporary engineering and structural applications. However, large scale production of natural fibre composites is in prone because of the challenges in manufacturing and machining. Fibre composite exhibits poor machinability characteristics owing to their heterogeneous and anisotropic behaviour. To overcome this problem, various steps and new methodologies have been established in the view to produce quality machining in natural fibre composites. In recent years, the possibility of conventional machining in natural fibre composites was also discussed. In the present review study, an effort has been taken in studying the fibre composite’s machining characteristics and their failure mechanism in both conventional and unconventional machining. The influence of process parameters in machining different natural fibre composites is also discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Engineering and Vibrations Research · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Mechanical Engineering, Kalasalingam Academy of Research and Education, Virudhunagar, India
Department of Mechanical Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, India
References (100+)
Show source-provided references
1. Ashby MF and Jones DRH. Engineering materials 1: an introduction to properties applications and design. Oxford: Elsevier 2012.10.1016/B978-0-08-096665-6.00001-5 ↗
2. Yi XS. An introduction to composite materials. In: Composite materials engineering. Vol. 1. Singapore: Springer 2017 pp.1–61.10.1007/978-981-10-5696-3_1 ↗
3. Mazumdar SK. Composites manufacturing: materials, product, and process engineering. Florida: CRC Press, 2002, 392 pp.
4. Wang RM Zheng SR and Zheng YP. Polymer matrix composites and technology. New Delhi: Woodhead Publishing India Private Limited 2011.10.1533/9780857092229 ↗
5. Chawla KK. Composite materials: science and engineering. 3rd ed. New York: Springer Science & Business Media 2012.
6. Mallick PK. Fiber-reinforced composites: materials manufacturing and design. 3rd ed. London: CRC Press 2007.10.1201/9781420005981 ↗
7. 10.1016/j.compositesb.2011.01.01010.1016/j.compositesb.2011.01.010 ↗
8. 10.1016/j.ejpe.2017.11.00510.1016/j.ejpe.2017.11.005 ↗
9. 10.1016/j.compositesa.2008.07.00710.1016/j.compositesa.2008.07.007 ↗
10. Shahzad A. Investigation into fatigue strength of natural/synthetic fiber-based composite materials. In: Mechanical and physical testing of biocomposites fibre-reinforced composites and hybrid composites. Duxford: Woodhead Publishing Series in Composites Science and Engineering 2018 pp.215–239.10.1016/B978-0-08-102292-4.00012-6 ↗
11. 10.1016/j.dt.2019.04.00810.1016/j.dt.2019.04.008 ↗
12. Aditya AR and Babu NCM. Design and analysis of composite panel with curved stiffeners for aircraft fuselage application. In: AIP conference proceedings [Internet] American Institute of Physics Inc. 2020 p. 030001.10.1063/1.5141564 ↗
13. 10.1016/j.jclepro.2017.10.10110.1016/j.jclepro.2017.10.101 ↗
14. 10.1016/j.carbpol.2018.11.08310.1016/j.carbpol.2018.11.083 ↗
15. 10.1016/j.conbuildmat.2018.04.14310.1016/j.conbuildmat.2018.04.143 ↗
16. Kauser B Upadhyay V Chak V et al. Moisture absorption behavior and mechanical properties of banana fiber-reinforced fly ash/epoxy composites. In: Innovation in materials science and engineering. Singapore: Springer 2019 pp.11–16.10.1007/978-981-13-2944-9_2 ↗
17. 10.1080/23311916.2018.144666710.1080/23311916.2018.1446667 ↗
18. 10.1016/j.carbpol.2017.11.09910.1016/j.carbpol.2017.11.099 ↗
19. 10.1177/073168441875676210.1177/0731684418756762 ↗
20. Witayakran S Smitthipong W Wangpradid R et al. Natural fiber composites: review of recent automotive trends. In: Encyclopedia of renewable and sustainable materials. Amsterdam: Elsevier 2020 pp.166–174.10.1016/B978-0-12-803581-8.04180-1 ↗
21. Huda MS Drzal LT Ray D et al. Natural-fiber composites in the automotive sector. In: Properties and performance of natural-fibre composites. Cambridge: Woodhead Publishing Series in Composites Science and Engineering 2008 pp.221–268.10.1533/9781845694593.2.221 ↗
22. Carus M Eder A Dammer L et al. Wood-plastic composites (WPC) and natural fibre composites (NFC): European and global markets 2012 and future trends in automotive and construction. 2015. Huerth: Nova-Institut GmbH.10.52548/THSZ9515 ↗
23. 10.1007/978-981-15-0434-110.1007/978-981-15-0434-1 ↗
24. 10.1016/j.compositesb.2011.10.00110.1016/j.compositesb.2011.10.001 ↗
25. Lotfi A, Li H, Dao DV, et al. Natural fiber–reinforced composites: a review on material, manufacturing, and machinability. J Thermoplast Compos Mater 2019; 1–47. DOI: 10.1177/0892705719844546.
26. 10.1177/089270571879654110.1177/0892705718796541 ↗
27. 10.1007/s00170-019-04271-310.1007/s00170-019-04271-3 ↗
28. 10.1016/j.compositesa.2019.01.02810.1016/j.compositesa.2019.01.028 ↗
29. 10.1177/073168441244432510.1177/0731684412444325 ↗
30. 10.1002/mame.20140008910.1002/mame.201400089 ↗
31. 10.1007/s00170-015-7592-210.1007/s00170-015-7592-2 ↗
32. 10.1016/j.cirp.2011.03.07810.1016/j.cirp.2011.03.078 ↗
33. 10.1016/j.dt.2018.02.00110.1016/j.dt.2018.02.001 ↗
34. 10.1115/1.290213110.1115/1.2902131 ↗
35. 10.1016/j.jmatprotec.2007.10.05010.1016/j.jmatprotec.2007.10.050 ↗
36. 10.1002/pc.1067110.1002/pc.10671 ↗
37. 10.1007/s00170-016-9010-910.1007/s00170-016-9010-9 ↗
38. 10.1080/10426914.2015.102597610.1080/10426914.2015.1025976 ↗
39. Wang H, Ning F, Hu Y, et al. Surface grinding of carbon fiber–reinforced plastic composites using rotary ultrasonic machining: effects of tool variables. Adv Mech Eng 2016; 8: 1–14.
40. 10.1177/00219983990330090310.1177/002199839903300903 ↗
41. 10.1016/j.wear.2014.12.03910.1016/j.wear.2014.12.039 ↗
42. 10.1007/s12633-018-9828-x10.1007/s12633-018-9828-x ↗
43. Delahaigue J, Chatelain J-F, Lebrun G. Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates. Proc Inst Mech Eng L J Mater Des Appl 2017; 231: 196–209.
44. 10.1177/073168441349286610.1177/0731684413492866 ↗
45. 10.1016/j.compositesa.2011.11.01910.1016/j.compositesa.2011.11.019 ↗
46. 10.1177/089270571557509410.1177/0892705715575094 ↗
47. 10.1016/S1003-6326(10)60126-410.1016/S1003-6326(10)60126-4 ↗
48. Hejjaji A Zitoune R Fayçal AM et al. Challenges of machining natural fiber-reinforced composites: a review. In: Drilling technology. Oldenbourg: De gruyter 2018 pp.149–160.10.1515/9783110481204-005 ↗
49. 10.1007/s00170-010-2605-710.1007/s00170-010-2605-7 ↗
50. 10.1016/j.surfcoat.2015.06.08310.1016/j.surfcoat.2015.06.083 ↗
51. 10.1088/1757-899X/197/1/01205610.1088/1757-899X/197/1/012056 ↗
52. Gohil PP Chaudhary V and Patel K. Challenges in machining of natural fibre composites. In: Manufacturing of natural fibre reinforced polymer composites. Cham: Springer International Publishing 2015 pp.139–153.10.1007/978-3-319-07944-8_7 ↗
53. 10.1016/j.mspro.2014.07.51310.1016/j.mspro.2014.07.513 ↗
54. Velumani S, Navaneethakrishnan P, Jayabal S, et al. Mathematical modeling and prediction of the thrust force and torque in drilling of sisal/glass-vinyl ester hybrid composite using the RSM, MLPNN, RBFN and ENN methods. Indian J Eng Mater Sci 2013; 20: 289–298.
55. 10.4028/www.scientific.net/AMM.766-767.79610.4028/www.scientific.net/AMM.766-767.796 ↗
56. 10.1007/s12034-011-0359-y10.1007/s12034-011-0359-y ↗
57. Abilash N, Sivapragash M. Optimizing the delamination failure in bamboo fiber reinforced polyester composite. J King Saud Univ Eng Sci 2016; 28: 92–102.10.1016/j.jksues.2013.09.004 ↗
58. 10.1016/j.triboint.2017.12.00610.1016/j.triboint.2017.12.006 ↗
59. 10.1080/10426914.2018.153258410.1080/10426914.2018.1532584 ↗
60. 10.1002/pc.2357210.1002/pc.23572 ↗
61. 10.1080/10426914.2014.94187010.1080/10426914.2014.941870 ↗
62. 10.4028/www.scientific.net/MSF.730-732.30110.4028/www.scientific.net/MSF.730-732.301 ↗
63. 10.1016/j.proeng.2013.09.17710.1016/j.proeng.2013.09.177 ↗
64. 10.1002/app.4287910.1002/app.42879 ↗
65. 10.1016/j.matpr.2019.05.20110.1016/j.matpr.2019.05.201 ↗
66. 10.1177/004051751772511810.1177/0040517517725118 ↗
67. Rajeev Kumar D, Varma PSSK, Rao BN. Optimum drilling parameters of coir fiber-reinforced polyester composites. Am J Mech Ind Eng 2017; 2: 92.
68. 10.1080/10426914.2016.123281110.1080/10426914.2016.1232811 ↗
69. Vinayagamoorthy R, Rajeswari N. Analysis of cutting forces during milling of natural fibered composites using fuzzy logic. Int J Compos Mater Manuf 2012; 2: 15–21.
70. 10.1080/10426914.2015.105944410.1080/10426914.2015.1059444 ↗
71. 10.1088/1757-899X/402/1/01218310.1088/1757-899X/402/1/012183 ↗
72. 10.1080/15440478.2018.155815810.1080/15440478.2018.1558158 ↗
73. 10.1007/s12588-016-9139-210.1007/s12588-016-9139-2 ↗
74. Sunil Kumar M, Amarnath K, Pradeep Kumar M. Optimization of process parameters in drilling of short fiber (Kenaf) composite. Int J Eng Res 2016; 5: 153–161.
75. 10.1177/095440541561934310.1177/0954405415619343 ↗
76. Yallew TB, Kumar P, Singh I. A study about hole making in woven jute fabric-reinforced polymer composites. Proc Inst Mech Eng L J Mater Des Appl 2016; 230: 888–898.
77. Dilli Babu G, Sivaji Babu K, Uma B, et al. Optimization of machining parameters in drilling hemp fiber reinforced composites to maximize the tensile strength using design experiments. Indian J Eng Mater Sci 2013; 20: 385–390.
78. 10.1177/073168441348684710.1177/0731684413486847 ↗
79. 10.9790/1684-023303710.9790/1684-0233037 ↗
80. 10.1007/978-3-030-04290-5_810.1007/978-3-030-04290-5_8 ↗
81. Rajaraman G, Agasti SK, Jenarthanan MP. Investigation on effect of process parameters on delamination during drilling of kenaf‐banana fiber reinforced in epoxy hybrid composite using Taguchi method. Polym Compos, 2019; 41: 25431.
82. 10.1063/1.503433410.1063/1.5034334 ↗
83. 10.1016/j.compositesb.2018.11.13410.1016/j.compositesb.2018.11.134 ↗
84. 10.4028/www.scientific.net/AMM.766-767.81210.4028/www.scientific.net/AMM.766-767.812 ↗
85. 10.1007/s12206-018-0409-010.1007/s12206-018-0409-0 ↗
86. 10.1016/j.jmapro.2018.05.03210.1016/j.jmapro.2018.05.032 ↗
87. 10.1177/002199831878237610.1177/0021998318782376 ↗
88. 10.1080/10426914.2018.145315010.1080/10426914.2018.1453150 ↗
89. Ismail SO, Dhakal HN, Popov I, et al. Comprehensive study on machinability of sustainable and conventional fibre reinforced polymer composites. Eng Sci Technol 2016; 19: 2043–2052.
90. 10.1080/15440478.2019.161230910.1080/15440478.2019.1612309 ↗
91. 10.4028/www.scientific.net/AMR.941-944.27510.4028/www.scientific.net/AMR.941-944.275 ↗
92. Hutyrová Z Zajac J Mital D et al. Evaluation of share material after turning of wood plastic composite. In: Proceedings – international conference on solar energy and building Institute of Electrical and Electronics Engineers Inc. 2015.10.1109/ICSoEB.2015.7244946 ↗
93. 10.4028/www.scientific.net/KEM.581.9510.4028/www.scientific.net/KEM.581.95 ↗
94. Somsakova Z, Zajac J, Michalik P, et al. Machining of wood plastic composite (pilot experiment). Mater Plast 2012; 49: 55–57.
95. 10.1016/j.promfg.2018.07.03810.1016/j.promfg.2018.07.038 ↗
96. 10.1177/002199831982637310.1177/0021998319826373 ↗
97. Dilli Babu G, Sivaji Babu K, Uma B, et al. Effect of machining parameters on milled natural fiber-reinforced plastic composites. J Adv Mech Eng 2013; 1: 1–12.
98. 10.1088/1757-899X/152/1/01205110.1088/1757-899X/152/1/012051 ↗
99. 10.1007/s00170-007-1318-z10.1007/s00170-007-1318-z ↗
100. 10.1007/s11012-015-0187-z10.1007/s11012-015-0187-z ↗