Limitations of processing carbon fibre reinforced plastic/polymer material using automated fibre placement technology
Source abstract
Abstract
Automated fibre placement was used to optimise the tow steering of carbon fibre reinforced plastic/polymer whereby the minimum defect-free steering radius (R min ) achievable. The results revealed that in the case of the woven ply surface with unheated tool the R min , using 1/4 inch tows, is found to be 1350 mm. For the bare tool surface, the tool temperature had to be raised to 30℃ in order to achieve the same R min of 1350 mm. To attain a seamless transition from part design to manufacture using CAD, automated fibre placement was equipped with software tools (TruPLAN and TruFIBER). From the results of software validation and steering trials on a variable radius tool having a pre-laid UD ply, it is found that the ability to steer around a tighter radius was a vast asset of the 1/8 inch tow over the 1/4 inch one, which makes it the preferred choice for the more geometrically complex parts.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Manufacturing Process and Optimization · Additive Manufacturing and 3D Printing Technologies · BIM and Construction Integration
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Composites Centre, AMRC (Advanced Manufacturing Research Centre) with Boeing, University of Sheffield, Sheffield, UK
Physics Department, Mansoura University, Mansoura, Egypt
References (19)
Show source-provided references
1. Blom AW, Kang LS and Vandenbrande JH. Fiber placemenet optimization for steered- fiber plies. Patent No. US 2014/0288893 A1, Boeing, Chicago, USA, 2014.
2. Blanchard Y. Composites design optimization for automated fibre placement. In: SAE aerospace manufacturing and automated fastening conference & exhibition , Utah, 23–25 September 2014.10.4271/2014-01-2261 ↗
3. Jeffries K. Enhanced robotic automated fiber placement with accurate robot technology and modular fiber placement head. SAE Int J Aerosp 2013; 6. DOI: 10.4271/2013-01-2290.10.4271/2013-01-2290 ↗
4. Wells D and Walker A. Integrating ultrasonic cutting with high-accuracy robotic automatic fiber placement for production flexibility. In: SAMPE Tech , Seattle, 2014.
5. Wu KC, Tatting BF, Smith BH, et al. Design and manufacturing of tow-steered composite shells using fiber placement. In: 50th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics, and materials conference , California, 4–7 May 2009. DOI: 10.2514/6.2009-2700.10.2514/6.2009-2700 ↗
6. 10.1515/secm-2013-025710.1515/secm-2013-0257 ↗
7. 10.1115/1.173668510.1115/1.1736685 ↗
8. Vickers JH and Pelham LI. Automated fiber placement composite manufacturing: the mission at MSFC’s productivity enhancement complex. In: Technology 2002 the third national technology transfer conference and exposition , vol. 2, NASA Washington, Alabama, 1 February 1993, pp.255–261.
9. Klomp-de Boer R. Automated preform fabrication by dry tow placement. In: National aerospace laboratory NLR, NLR-TP-2008-789, SAMPE Tech ., Texas, October 2011, pp.17–20. Amsterdam: National Aerospace Laboratory NLR.
10. Rhead AT · Comput Mater Con · 2013 · 35 · 1
11. Salcines OF. Analysis of process-induced defects on steered-fiber panels for aeronatutical applications . PhD Thesis, University of Girona, Spain, 2014.
12. IJsselmuiden ST. Optimal design of variable stiffness composite structures using lamination paramenters . PhD Thesis, Delft University of Technology, the Netherlands, 2011.
13. 10.1016/j.compositesb.2010.11.00510.1016/j.compositesb.2010.11.005 ↗
14. 10.1016/j.compstruct.2012.10.03110.1016/j.compstruct.2012.10.031 ↗
15. 10.1016/j.compstruct.2013.08.02310.1016/j.compstruct.2013.08.023 ↗
16. 10.1016/j.compositesa.2007.05.00310.1016/j.compositesa.2007.05.003 ↗
17. Mee K, Kilham T, Scaife R, et al. Application of AFP to structural aerospace components utilising out of autoclave materials. In: 32nd SAMPE Europe international technical conference & forum , Paris, 28–29 March 2011, pp.28–29. SAMPE Europe ISBN: 9781618399199.
18. 10.1016/j.compositesb.2014.05.02510.1016/j.compositesb.2014.05.025 ↗
19. Moruzzi M and Maclean D. Comprehensive cost analysis of the tradeoffs between design intent and applicable manufacturing strategies. In: Technical paper, Magestic Systems Inc. , 2015, http://s405481842.initial-website.com (accessed 28 June 2016).