Comparison of drill wear mechanism between rotary ultrasonic elliptical machining and conventional drilling of CFRP
Source abstract
Abstract
Carbon fiber-reinforced plastic (CFRP) is widely used as aircraft structural components for its superior mechanical and physical properties. Meanwhile, the rotary ultrasonic elliptical machining (RUEM), as a new drilling method in which an elliptical ultrasonic vibration is imposed on the end of the drill, can reduce tool wear effectively. In this paper, we firstly presented an investigation on the wear mechanism of diamond core drill in RUEM of CFRP in comparison with the conventional drilling (CD). A series of drilling experiments were performed including the drilling force measurement, the observation of drill topographies, and machined hole surface. The experiment results indicated that the drill performance in RUEM of CFRP was improved significantly in comparison with that in CD. Because the length of steady region rised by 39% and the tool life increased by 28% in RUEM than those in CD, respectively. With the observation of drill surface under a microscope, it was validated that less chip adhesion and more grain micro-fracture appeared in RUEM, which had a positive effect on the better drilling performance, such as lower drilling force, smoother hole surface.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering and Automation, Beihang University, Beijing, China
Chengdu Aircraft Industrial (Group) Co. Ltd., Chengdu, China
References (24)
Show source-provided references
1. 10.1177/00219980077266195810.1177/002199800772661958 ↗
2. Ucar M · J Adv Mater · 2005 · 37 · 46
3. 10.1016/j.jmatprotec.2006.11.14610.1016/j.jmatprotec.2006.11.146 ↗
4. 10.1016/0924-0136(94)01657-M10.1016/0924-0136(94)01657-M ↗
5. 10.1016/j.jmatprotec.2005.06.03910.1016/j.jmatprotec.2005.06.039 ↗
6. 10.1115/1.289958010.1115/1.2899580 ↗
7. Tsao CC and Hocheng H. Analysis of delamination in drilling composite materials using core-center drill. In: 11th ICCE , Hilton Head, SC, USA, 2004.
8. 10.1016/S0924-0136(03)00749-010.1016/S0924-0136(03)00749-0 ↗
9. 10.1016/j.ijmachtools.2004.08.00110.1016/j.ijmachtools.2004.08.001 ↗
10. Kubota M · Bull Japan Soc Precision Eng · 1977 · 11 · 127
11. 10.1080/10910344.2012.69896210.1080/10910344.2012.698962 ↗
12. 10.1016/j.ijmachtools.2011.10.00710.1016/j.ijmachtools.2011.10.007 ↗
13. Cong WL, Feng Q, Pei ZJ, et al. Dry machining of carbon fiber reinforced plastic composite by rotary ultrasonic machining: effects of machining variables. In: Proceedings of the ASME 2011 international manufacturing science and engineering conference , 13–17 June 2011, Corvallis, OR, USA.10.1115/MSEC2011-50116 ↗
14. 10.1177/073168441141626610.1177/0731684411416266 ↗
15. 10.1177/073168441246491310.1177/0731684412464913 ↗
16. 10.1177/002199831142462510.1177/0021998311424625 ↗
17. 10.1177/073168441141626610.1177/0731684411416266 ↗
18. 10.4028/www.scientific.net/KEM.291-292.44310.4028/www.scientific.net/KEM.291-292.443 ↗
19. Petrukha PG · Russian Eng J · 1970 · 50 · 70
20. 10.1016/j.ijmachtools.2005.01.03410.1016/j.ijmachtools.2005.01.034 ↗
21. 10.1016/j.ijmachtools.2005.01.03110.1016/j.ijmachtools.2005.01.031 ↗
22. Malkin S. Grinding technology: theory and applications of machining with abrasives, Chichester: Ellis Horwood, 1989, pp. 197–221.
23. 10.1016/S0043-1648(03)00078-410.1016/S0043-1648(03)00078-4 ↗
24. Liang Z, Wu Y, Wang X, et al. Two-dimensional ultrasonically assisted grinding technique of monocrystal silicon. In: Proceedings of the 5th international conference on leading edge manufacturing in 21st century , 2009, Osaka, Japan, pp. 535–540.10.1299/jsmelem.2009.5.535 ↗