journal article·2008-01

Electromagnetic Shielding Effectiveness of Copper/Stainless Steel/Polyamide Fiber Co-Woven-Knitted Fabric Reinforced Polypropylene Composites

H.C. Chen, J.H. Lin, K.C. Lee

Publisher page

Abstract

Copper wire and polyamide filament were used as the core yarn, and stainless steel wire was used as the wrapping yarn to fabricate the loop yarns for knitting structure. The nonwoven selvedge served as the core yarn, and the conducting wire was used as the wrapping yarn, to fabricate the weft-inlaid yarn. The rotor twister successfully fabricated a series of conductive hybrid yarns (CHYs). The co-woven-knitted machine successfully fabricated the conductive co-woven-knitted fabrics (CWKFs) with various CHYs. The conducting materials of the hybrid yarn were copper wire and stainless steel wire, taken as the wrapping and core yarn, respectively. The conductive co-woven-knitted fabrics were laminated with various angles in four and six layers and then heat pressed to 2 and 3 mm in thickness. This study investigated the surface resistivity, electromagnetic shielding effectiveness (EMSE) and electrostatic discharge (ESD) attenuation percentage of the co-woven-knitted fabrics and CWKFs reinforced composites.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Advanced Sensor and Energy Harvesting Materials · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Graduate Institute of Textile Engineering, Feng Chia University No. 100, Wen-Hwa Rd., Seatwen, Taichung 40724, Taiwan, R.O.C.,

Graduate Institute of Textile Engineering, Feng Chia University No. 100, Wen-Hwa Rd., Seatwen, Taichung 40724, Taiwan, R.O.C.

Department of Textile Engineering, Chinese Culture University No. 55, Hwa-Kang Rd., Yang Ming Shan, Taipei 11192, Taiwan, R.O.C.

References (32)

Show source-provided references
1. 10.1109/MSPEC.2002.102194510.1109/MSPEC.2002.1021945 ↗
2. 10.1109/MP.2003.118093710.1109/MP.2003.1180937 ↗
3. 10.1109/AERO.1995.46889110.1109/AERO.1995.468891 ↗
4. Williams, T. · IEE Colloquium · 1999 · 23 · 5
5. Niehs · 1999
6. 10.1109/45.28381310.1109/45.283813 ↗
7. Greshham, R.M. (1988). EMI/RFI Shielding of Plastics, Plastic Surface Finishing, 63—69.
8. Hoeft, L.O. and Tokarsky E.W. (2000). Measured Electromagnetic Shielding Characteristics of Fabric made from Metal Clad Aramid Yarn and Wire, IEEE International Symposium in EMC, Washington DC, Vol. 2, pp. 883—886, USA.10.1109/ISEMC.2000.874739 ↗
9. Barry, C. · Plastic Surface Finishing · 1989 · 30
10. 10.1002/(SICI)1097-4628(19970103)63:1<115::AID-APP12>3.0.CO;2-410.1002/(SICI)1097-4628(19970103)63:1<115::AID-APP12>3.0.CO;2-4 ↗
11. Diaz, A.F. · J. Chem. Soc. Chem. Commun. · 1979 · 635
12. 10.1106/MHKX-74A6-PKEM-J7PL10.1106/MHKX-74A6-PKEM-J7PL ↗
13. 10.1016/S1359-835X(02)00076-310.1016/S1359-835X(02)00076-3 ↗
14. 10.1016/S1359-835X(00)00071-310.1016/S1359-835X(00)00071-3 ↗
15. 10.1016/S1359-835X(04)00119-810.1016/S1359-835X(04)00119-8 ↗
16. Keiser, B.E. (1979). Principles of Electromagnetic Compatibility, Washington DC: Artech House Inc., pp. 111—139.
17. 10.1080/0040500980865861510.1080/00405009808658615 ↗
18. 10.1080/0040500980865863410.1080/00405009808658634 ↗
19. Lin, Z.H. · J. Hwa Gang Textile · 1997 · 5 · 30
20. Yang, C.C. · J. Hwa. Gang. Textile · 1998 · 5 · 157
21. Chang, H.L. (2000). A Study of Coweaving Rib-warped Fabrics, Graduate Institute of Textile Engineering, Feng Chia University , Taichung, Taiwan, pp. 4—20.
22. Astm · 1999
23. Wilson, P.F. · NBS technical note · 1986
24. Wilson, P.F. · IEEE Trans on EMC · 1988 · 30 · 239
25. Simon, R.M. · EMC Technology · 1983 · 2 · 39
26. Advantest Co. (1997). Operation Manual of R-3132 Spectrum Analyzer, ADVANTEST Co., pp. 7—56 and 81—101.
27. Paul, C.R. (1992). Introduction to Electromagnetic Compatibility , pp. 632—687, Wiley, New York .
28. 10.1002/pc.1053010.1002/pc.10530 ↗
29. IEC · 1995
30. Noiseken · 2000
31. Noiseken · 2000
32. LeCroy · 2000