journal article·2012-03

Morphology, mechanical, and crystallization behaviors of micro- and nano-ZnO filled polypropylene composites

Haydar U. Zaman, Park Deuk Hun, Ruhul A. Khan, Keun-Byoung Yoon

Publisher page

Abstract

The aim of this study was to study the effect of ZnO concentration on the morphology, mechanical, and crystallization behaviors of iPP. Three compositions of iPP/mZnO and iPP/nZnO composites were prepared in a co-rotational twin-screw extruder machine with ZnO content of 2 wt%, 5 wt%, and 8 wt%. Tensile tests showed that the tensile strength at yield and tensile modulus of the composites tended to increase with increasing contents of mZnO/nZnO particles. This improvement in the tensile properties was attributed to good interfacial adhesion between the fillers and the matrix, as evidenced by TEM examination. The tensile strength at yield and tensile modulus values of iPP/nZnO composite with the addition of 2–8 wt% nZnO are higher than those of virgin iPP, and even higher than those of iPP/mZnO composite with the addition of 2–8 wt% mZnO. The non-isothermal crystallization behavior of iPP/mZnO and iPP/nZnO composites was investigated using DSC. The results indicated that the interfacial interaction between iPP and mZnO/nZnO increased the crystallization temperature when the content of ZnO is 5 wt%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Polymer Science and Engineering, Kyungpook National University, Daegu 702-701, Korea

Radiation and Polymer Chemistry Laboratory, Institute of Nuclear Science and Technology, Bangladesh Atomic Energy Commission, GPO Box No. 3787, Dhaka 1000, Bangladesh

References (32)

Show source-provided references
1. 10.1016/S0032-3861(02)00120-910.1016/S0032-3861(02)00120-9 ↗
2. 10.1016/j.polymer.2004.06.02710.1016/j.polymer.2004.06.027 ↗
3. 10.1016/S0927-796X(00)00012-710.1016/S0927-796X(00)00012-7 ↗
4. 10.1002/app.2097710.1002/app.20977 ↗
5. Chatterjee A. · J Appl Polym Sci · 2010 · 116 · 339610.1002/app.31883 ↗
6. 10.1016/j.jcrysgro.2003.08.04110.1016/j.jcrysgro.2003.08.041 ↗
7. 10.1016/S0921-5107(03)00314-310.1016/S0921-5107(03)00314-3 ↗
8. 10.1016/j.jcrysgro.2003.12.01010.1016/j.jcrysgro.2003.12.010 ↗
9. 10.1016/S0022-0248(03)01250-810.1016/S0022-0248(03)01250-8 ↗
10. 10.1023/B:JMSC.0000041713.37366.c210.1023/B:JMSC.0000041713.37366.c2 ↗
11. 10.1021/cm049399710.1021/cm0493997 ↗
12. 10.1002/pen.2007010.1002/pen.20070 ↗
13. 10.1016/j.compscitech.2006.07.01010.1016/j.compscitech.2006.07.010 ↗
14. 10.1016/j.polymer.2005.05.12710.1016/j.polymer.2005.05.127 ↗
15. 10.1016/S0141-3910(01)00046-510.1016/S0141-3910(01)00046-5 ↗
16. 10.1021/cm981058410.1021/cm9810584 ↗
17. 10.1002/polb.2074310.1002/polb.20743 ↗
18. 10.1016/j.compscitech.2007.08.01910.1016/j.compscitech.2007.08.019 ↗
19. 10.1002/app.1283010.1002/app.12830 ↗
20. 10.1016/0032-3861(96)83143-010.1016/0032-3861(96)83143-0 ↗
21. 10.1016/j.polymer.2004.06.02710.1016/j.polymer.2004.06.027 ↗
22. 10.1016/S0014-3057(02)00333-610.1016/S0014-3057(02)00333-6 ↗
23. Garcia M. · Rev Adv Mater Sci · 2004 · 6 · 169
24. 10.1002/app.2519510.1002/app.25195 ↗
25. 10.1016/j.polymer.2004.07.07110.1016/j.polymer.2004.07.071 ↗
26. 10.1002/polb.2032410.1002/polb.20324 ↗
27. 10.1016/j.polymer.2003.11.04610.1016/j.polymer.2003.11.046 ↗
28. 10.1016/S0032-3861(02)00120-910.1016/S0032-3861(02)00120-9 ↗
29. 10.1007/0-387-26213-X_210.1007/0-387-26213-X_2 ↗
30. 10.1002/polb.1054610.1002/polb.10546 ↗
31. Aswathy V. · Int J Plast Technol · 2008 · 12 · 957
32. Subramani C. · Nanotechnol · 2007 · 18