Preparation, microstructures, and properties of long-glass-fiber-reinforced thermoplastic composites based on polycarbonate/poly(butylene terephthalate) alloys
Source abstract
Abstract
This article investigated the preparation, microstructures, and performance of long-fiber-reinforced thermoplastic polycarbonate/poly(butylene terephthalate) alloys through the joint processing of melt blending followed with a melt pultrusion. The mechanical evaluation demonstrated that the resulting composites achieved significant improvements in tensile strength, flexural strength and modulus, and notched impact strength. Such a prominent reinforcement effect is attributed to the feature that the residual fiber length within the injection-molded long-fiber-reinforced thermoplastic composite specimens is much longer than that of the short-fiber-reinforced ones. This takes full advantage of the strength of the reinforcing fibers themselves. The improvement in impact toughness is due to the energy dissipation by both the fiber pullout and fiber fracture as a result of the long-fiber-reinforcing effectiveness. The scanning electron microscopy investigation confirmed that the fiber pullout and fiber breakage concurred on the impact and tensile fracture surfaces, and the former was more significant than the latter. Meanwhile, the scanning electron microscopy observation also indicated a good interfacial adhesion between the thermoplastic matrix and fibers, which results in the subsidiary enhancement of mechanical properties. The study of dynamic mechanical analysis revealed the long-fiber-reinforced thermoplastic polycarbonate/poly(butylene terephthalate) composites achieved a remarkable increase in storage modulus but presented a considerable decrease in loss-factor magnitude compared to the pristine alloys. The thermal stabilities of the composites were also slightly improved in the presence of long glass fibers according to the results of thermogravimetric analysis.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Organic–Inorganic Composites, Beijing University of Chemical Technology, Beijing, China
References (58)
Show source-provided references
1. Mallick PK · 1988
2. 10.1002/mame.20050005110.1002/mame.200500051 ↗
3. 10.1002/app.1986.07032053010.1002/app.1986.070320530 ↗
4. 10.1016/S0266-3538(97)00129-210.1016/S0266-3538(97)00129-2 ↗
5. 10.1002/adv.2003510.1002/adv.20035 ↗
6. 10.1016/j.compositesa.2006.01.00710.1016/j.compositesa.2006.01.007 ↗
7. 10.1016/j.compositesa.2013.04.00210.1016/j.compositesa.2013.04.002 ↗
8. 10.1515/POLYENG.1986.6.1-4.34510.1515/POLYENG.1986.6.1-4.345 ↗
9. 10.1002/app.1362710.1002/app.13627 ↗
10. 10.1016/j.msea.2010.12.08110.1016/j.msea.2010.12.081 ↗
11. 10.1002/pc.2286810.1002/pc.22868 ↗
12. 10.1002/pen.2176510.1002/pen.21765 ↗
13. 10.1177/089270570301600400110.1177/0892705703016004001 ↗
14. 10.1016/S0263-8223(01)00110-610.1016/S0263-8223(01)00110-6 ↗
15. Tomita Y · Mater Sci Eng A · 2011 · 319 · 679
16. 10.1016/j.matchar.2008.12.02010.1016/j.matchar.2008.12.020 ↗
17. 10.1016/j.matdes.2012.12.03010.1016/j.matdes.2012.12.030 ↗
18. 10.1016/1359-835X(95)00065-A10.1016/1359-835X(95)00065-A ↗
19. 10.1016/1359-835X(96)00016-410.1016/1359-835X(96)00016-4 ↗
20. 10.1016/1359-835X(96)00066-810.1016/1359-835X(96)00066-8 ↗
21. 10.1016/S1359-835X(96)00127-310.1016/S1359-835X(96)00127-3 ↗
22. 10.1016/S1359-835X(02)00179-310.1016/S1359-835X(02)00179-3 ↗
23. 10.1016/j.compositesa.2004.11.00410.1016/j.compositesa.2004.11.004 ↗
24. 10.1016/S0266-3538(99)00083-410.1016/S0266-3538(99)00083-4 ↗
25. 10.3144/expresspolymlett.2007.6410.3144/expresspolymlett.2007.64 ↗
26. 10.1016/S1359-8368(97)00011-510.1016/S1359-8368(97)00011-5 ↗
27. 10.1002/pc.1022310.1002/pc.10223 ↗
28. 10.1016/j.compstruct.2004.07.02310.1016/j.compstruct.2004.07.023 ↗
29. 10.1016/j.polymertesting.2006.12.00710.1016/j.polymertesting.2006.12.007 ↗
30. 10.1016/S0032-3861(96)00712-410.1016/S0032-3861(96)00712-4 ↗
31. 10.1002/pen.1017610.1002/pen.10176 ↗
32. 10.1016/S0266-3538(01)00055-010.1016/S0266-3538(01)00055-0 ↗
33. 10.1002/app.1980.07025062310.1002/app.1980.070250623 ↗
34. 10.1016/j.mechrescom.2013.12.00610.1016/j.mechrescom.2013.12.006 ↗
35. 10.3144/expresspolymlett.2008.6810.3144/expresspolymlett.2008.68 ↗
36. 10.1016/S0266-3538(02)00089-110.1016/S0266-3538(02)00089-1 ↗
37. 10.1016/j.compositesa.2008.10.01310.1016/j.compositesa.2008.10.013 ↗
38. 10.1016/0266-3538(91)90032-K10.1016/0266-3538(91)90032-K ↗
39. 10.1016/j.polymer.2005.05.07310.1016/j.polymer.2005.05.073 ↗
40. 10.1016/S0266-3538(96)00072-310.1016/S0266-3538(96)00072-3 ↗
41. 10.1002/polb.2181510.1002/polb.21815 ↗
42. 10.1016/S0014-3057(01)00033-710.1016/S0014-3057(01)00033-7 ↗
43. 10.1016/j.ijsolstr.2015.03.03410.1016/j.ijsolstr.2015.03.034 ↗
44. 10.1016/j.polymertesting.2011.07.00610.1016/j.polymertesting.2011.07.006 ↗
45. 10.1016/0022-5096(65)90035-910.1016/0022-5096(65)90035-9 ↗
46. 10.1016/S1359-835X(02)00150-110.1016/S1359-835X(02)00150-1 ↗
47. Tao ZZ, Wang YT, Li JH, et al. Fabrication of long glass fiber reinforced polyacetal composites: mechanical performance, microstructures, and isothermal crystallization kinetics. Polym Compos. Epub ahead of print 2015. DOI: 10.1002/pc.23090.10.1002/pc.23090 ↗
48. 10.1002/app.4069710.1002/app.40697 ↗
49. 10.1016/0266-3538(91)90072-W10.1016/0266-3538(91)90072-W ↗
50. Cottrell AH · 1964
51. 10.1016/j.compscitech.2010.05.01610.1016/j.compscitech.2010.05.016 ↗
52. 10.1016/0032-3861(95)99423-R10.1016/0032-3861(95)99423-R ↗
53. 10.1002/pat.308810.1002/pat.3088 ↗
54. Nielsen LE · 1994
55. 10.1021/ie901767y10.1021/ie901767y ↗
56. 10.1016/j.polymertesting.2004.08.00210.1016/j.polymertesting.2004.08.002 ↗
57. 10.1002/pc.75008050510.1002/pc.750080505 ↗
58. 10.1016/j.polymdegradstab.2010.02.03310.1016/j.polymdegradstab.2010.02.033 ↗