journal article·2012-09

Prediction and optimization of cure cycle of thick fiber-reinforced composite parts using dynamic artificial neural networks

Parisa Eghbal Jahromi, Akbar Shojaei, S Mahmoud Reza Pishvaie

Publisher page

Abstract

Curing of thermoset-based composites experience substantial temperature overshoot, especially at the center of thick parts and large temperature gradient exists through the whole part due to large amount of heat released and low conductivity of the composite. This leads to non-uniformity of cure, residual stress and consequently composite cracks and possibly degradation of the polymer. The scope of this work is to optimize the cure cycle in order to improve the properties and gaining a relatively uniform part of composite, using trained recurrent artificial neural networks purposed for speeding up the repetitious model re-calls during the optimization process. Numerical results obtained based on the three-dimensional finite volume method is used to train the network. The optimization problem is aimed to develop multi-linear-stage cure cycles by minimizing the objective function that includes maximum temperature difference through the cure cycle with the constraints of maximum allowable temperature considering degradation temperature of the polymer, minimum temperature of cure initiation, and finally reaching a maximum final conversion. The results showed the effectiveness of the approach used in this study in terms of the optimization computation time.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Injection Molding Process and Properties · Advanced Numerical Analysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran

References (40)

Show source-provided references
1. 10.1177/002199830203600130010.1177/0021998302036001300 ↗
2. 10.1016/j.compositesa.2005.06.01010.1016/j.compositesa.2005.06.010 ↗
3. 10.1016/S1359-835X(97)00046-810.1016/S1359-835X(97)00046-8 ↗
4. 10.1016/j.matdes.2010.11.00110.1016/j.matdes.2010.11.001 ↗
5. 10.1016/j.compositesa.2011.06.00210.1016/j.compositesa.2011.06.002 ↗
6. 10.1016/j.applthermaleng.2004.03.00510.1016/j.applthermaleng.2004.03.005 ↗
7. 10.1016/j.finel.2011.02.00710.1016/j.finel.2011.02.007 ↗
8. 10.1016/j.compstruct.2005.10.00110.1016/j.compstruct.2005.10.001 ↗
9. 10.1177/002199830606807710.1177/0021998306068077 ↗
10. 10.1007/s12289-009-0450-810.1007/s12289-009-0450-8 ↗
11. 10.1002/pen.1171910.1002/pen.11719 ↗
12. 10.3144/expresspolymlett.2009.6710.3144/expresspolymlett.2009.67 ↗
13. 10.1177/00219983970310220310.1177/002199839703102203 ↗
14. 10.1134/S199542121001003X10.1134/S199542121001003X ↗
15. 10.1134/S199542120904007810.1134/S1995421209040078 ↗
16. 10.1016/S0266-3538(02)00196-310.1016/S0266-3538(02)00196-3 ↗
17. 10.1016/S1359-835X(99)00027-510.1016/S1359-835X(99)00027-5 ↗
18. 10.4028/www.scientific.net/KEM.144.23110.4028/www.scientific.net/KEM.144.231 ↗
19. 10.1016/S0263-8223(01)00152-010.1016/S0263-8223(01)00152-0 ↗
20. 10.1080/1040200970898366010.1080/10402009708983660 ↗
21. 10.1016/S0954-1810(96)00056-810.1016/S0954-1810(96)00056-8 ↗
22. 10.1016/S0032-5910(99)00254-510.1016/S0032-5910(99)00254-5 ↗
23. 10.1177/08927057980110060410.1177/089270579801100604 ↗
24. 10.1106/K93R-JWRR-GJCA-AMRY10.1106/K93R-JWRR-GJCA-AMRY ↗
25. 10.1016/S0959-1524(00)00064-010.1016/S0959-1524(00)00064-0 ↗
26. 10.1002/pc.1030910.1002/pc.10309 ↗
27. 10.1016/S0952-1976(97)00055-910.1016/S0952-1976(97)00055-9 ↗
28. 10.1016/S0924-0136(98)00052-110.1016/S0924-0136(98)00052-1 ↗
29. 10.1177/00219983950290130510.1177/002199839502901305 ↗
30. 10.3139/217.012910.3139/217.0129 ↗
31. 10.1016/j.compstruct.2003.12.00110.1016/j.compstruct.2003.12.001 ↗
32. 10.1016/S0266-3538(03)00106-410.1016/S0266-3538(03)00106-4 ↗
33. 10.1177/073168440706995010.1177/0731684407069950 ↗
34. Edgar TF, Himmelblau DM, Lasdon LS. Nonlinear programming with constraints, optimization of chemical processes. New York: McGraw-Hill, 2001, pp. 672–672.
35. Dave RS, Loss AC. Thermoset resin cure kinetics and rheology, processing of composites. Munich: Hanser, 2000, pp. 471–471.
36. Neural Network Toolbox of Matlab 7.4.1(R2007a).
37. 10.1016/0893-6080(89)90020-810.1016/0893-6080(89)90020-8 ↗
38. 10.1061/(ASCE)0887-3801(1994)8:2(131)10.1061/(ASCE)0887-3801(1994)8:2(131) ↗
39. Baughman DR, Liu YA. Neural network in bio-processing and chemical engineering. San Diego, California: Academic Press, 1995, pp. 488–488.
40. 10.1162/neco.1992.4.3.41510.1162/neco.1992.4.3.415 ↗