journal article·2010-03

Mechanical Performance of Hemp Fiber Polypropylene Composites at Different Operating Temperatures

Mehdi Tajvidi, Nazanin Motie, Ghonche Rassam, Robert H. Falk, Colin Felton

Publisher page

Abstract

In order to quantify the effect of temperature on the mechanical properties of hemp fiber polypropylene composites, formulations containing 25% and 40% (by weight) hemp fiber were produced and tested at three representative temperatures of 256, 296, and 336 K. Flexural, tensile, and impact tests, as well as dynamic mechanical analysis, were performed and the reduction in mechanical properties were evaluated. Impact resistance was independent of temperature, whereas flexural and tensile properties were strongly affected. The highest reductions were observed in stiffness (modulus) values and flexural properties were reduced to a higher degree. The reductions in mechanical properties were well explained by a simple quadratic curve-fitting procedure applied to experimental data. Dynamic mechanical analysis revealed no change in glass transition temperature when the fiber content was increased but the composite material had better temperature resistance at higher fiber content. The results of the present study will be helpful in determining the end-use application of these composite materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Bamboo properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Wood and Paper Science and Technology, Faculty of Natural Resources, University of Tehran, Karaj, Iran,

Department of Wood and Paper Science and Technology, Faculty of Natural Resources, University of Tehran, Karaj, Iran

Department of Wood Science and Technology, Faculty of Civil Shaheed Rajaee Teacher Training University, Tehran, Iran

USDA Forest Products Laboratory, Madison, WI, USA

Madison, Wisconsin, USA

References (15)

Show source-provided references
1. Clemons, C. · Forest Product Journal · 2002 · 52 · 10
2. 10.1016/B0-08-043152-6/01772-110.1016/B0-08-043152-6/01772-1 ↗
3. 10.1002/app.2071210.1002/app.20712 ↗
4. Beckermann, G.
5. 10.1016/S1359-835X(00)00098-110.1016/S1359-835X(00)00098-1 ↗
6. Schildmeyer, A.J. · 2006
7. 10.1016/S0263-8223(97)00078-010.1016/S0263-8223(97)00078-0 ↗
8. Pooler, D.J. · 2001
9. Kobbe, R.G. · 2005
10. ASTM D790-07 · ASTM Annual Book · 2007 · 08
11. ASTM D-638-03 · ASTM Annual Book · 2003 · 08
12. ASTM D256-06a · ASTM Annual Book · 2006 · 08
13. 10.1002/app.2209310.1002/app.22093 ↗
14. Tajvidi, M. ( 2003). Study on the Engineering and Viscoelastic Properties of Natural Fiber Thermoplastic Composites using Dynamic Mechanical Analysis (DMA), PhD Dissertation, Faculty of Natural Resources, University of Tehran, Karaj, Iran, p. 202.
15. 10.1002/pc.2040010.1002/pc.20400 ↗