Mechanical, Degradation, and Interfacial Properties of Synthetic Degradable Fiber Reinforced Polypropylene Composites
Source abstract
Abstract
Polypropylene (PP) matrix synthetic phosphate based degradable fiber reinforced unidirectional composites (10% fiber by weight) were fabricated by compression molding. Tensile strength (TS), tensile modulus (TM), elongation at break (%), bending strength (BS), bending modulus (BM), and impact strength (IS) were found to be 38 MPa, 1.5 GPa, 12%, 44 MPa, 4.9 GPa, and 7.58 kJ/m 2 respectively. Degradation tests of the fibers and composites were performed for six months in aqueous medium at room temperature (25°C). After six months, the mechanical properties of the composites retained almost 80% of their original properties. The interfacial shear strength (IFSS) of the composites were also measured by single fiber fragmentation test (SFFT). The IFSS of the composite system was found 5.9 MPa that indicated good fiber matrix adhesion.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nuclear and Radiation Chemistry Division, Institute of Nuclear Science and Technology Bangladesh Atomic Energy Commission, Dhaka 1000, Bangladesh,
Nuclear and Radiation Chemistry Division, Institute of Nuclear Science and Technology Bangladesh Atomic Energy Commission, Dhaka 1000, Bangladesh
Department of Applied Chemistry and Chemical Technology, The University of Dhaka Dhaka 1000, Bangladesh
References (26)
Show source-provided references
1. Garcia, M. · Rev. Adv. Mater. Sci. · 2004 · 6 · 169
2. 10.1080/0360255910801922310.1080/03602559108019223 ↗
3. 10.1023/A:101091872199810.1023/A:1010918721998 ↗
4. Wolcott, M. P. · 1993
5. 10.1016/S0079-6700(98)00018-510.1016/S0079-6700(98)00018-5 ↗
6. 10.1016/S0266-3538(03)00096-410.1016/S0266-3538(03)00096-4 ↗
7. 10.1016/0168-583X(95)00528-510.1016/0168-583X(95)00528-5 ↗
8. 10.1016/0142-9612(94)90091-410.1016/0142-9612(94)90091-4 ↗
9. 10.1016/j.biomaterials.2004.07.04210.1016/j.biomaterials.2004.07.042 ↗
10. Hench, L.L. and Thomson, I. ( 2000). Medical Applications of Composites, Comprehensive Composite Materials, In: Kelly, A. and Zweben, C. (eds). Vol. 6, pp. 727-753, Elsevier Science Publishing Company Ltd. , United Kingdom.10.1016/B0-08-042993-9/00191-1 ↗
11. 10.1016/S0142-9612(03)00547-710.1016/S0142-9612(03)00547-7 ↗
12. 10.1016/j.biomaterials.2003.10.01310.1016/j.biomaterials.2003.10.013 ↗
13. 10.1002/jbm.82026120310.1002/jbm.820261203 ↗
14. 10.1007/978-1-4613-1829-3_910.1007/978-1-4613-1829-3_9 ↗
15. 10.1002/jab.77003030610.1002/jab.770030306 ↗
16. 10.1007/978-1-4757-2156-010.1007/978-1-4757-2156-0 ↗
17. Cabral, F.S. · Testi. · 2003 · 22 · 907
18. National Physical Laboratory Report No. MATC(A) (2001). 16: 1-69.
19. 10.1016/S0143-7496(99)00068-810.1016/S0143-7496(99)00068-8 ↗
20. 10.1016/S1359-835X(01)00018-510.1016/S1359-835X(01)00018-5 ↗
21. Slivka, M.A. · I. Raw Material Evaluation and Measurement of Fiber-matrix Interfacial Adhesion, J. Biomed. Mater. Research. · 1997 · 36 · 469
22. 10.1016/0022-5096(65)90035-910.1016/0022-5096(65)90035-9 ↗
23. 10.1080/0021846830807491110.1080/00218468308074911 ↗
24. 10.1007/BF0111603110.1007/BF01116031 ↗
25. 10.1016/0022-3093(84)90184-410.1016/0022-3093(84)90184-4 ↗
26. Honggang, W. · , East China University of Technology, Fuhe Cailiao Xuebao · 1999 · 16 · 51