The Tensile Fatigue Behavior of a GFRP Composite with Rubber Particle Modified Epoxy Matrix
Source abstract
Abstract
A thermosetting epoxy polymer was modified by incorporating 9 wt% of a CTBN rubber microparticles. The stress-controlled CA tensile fatigue behavior at stress ratio, R = 0.1 for both the neat and the modified epoxy was investigated. The addition of rubber particles increased the epoxy fatigue life by a factor of about three to four times. The rubber particle cavitation and plastic deformation of the surrounding material was observed to contribute to the enhanced fatigue life of the epoxy polymer. Then, the neat and the rubber-modified epoxy resins were infused into a quasi-isotropic, lay-up E-glass fiber, non-crimp fabric in a RIFT set -up to fabricate GFRP composite panels. Further, the stress-controlled CA tensile fatigue tests at stress ratio, R = 0.1 were performed on both of these GFRP composites. Matrix cracking and stiffness degradation was continuously monitored during the fatigue tests. Similar to bulk epoxy fatigue behavior, the fatigue life of GFRP composites increased by a factor of about three times due to the presence of rubber particles in the epoxy matrix. The suppressed matrix cracking and the reduced crack propagation rates in the rubber-modified matrix contribute towards the enhanced fatigue life of GFRP composites employing a rubber-modified epoxy matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Imperial College London, London, UK,
Department of Mechanical Engineering, Imperial College London, London, UK
Nanoresins AG, Geesthacht, Germany
References (37)
Show source-provided references
1. 10.1016/0032-3861(83)90070-810.1016/0032-3861(83)90070-8 ↗
2. 10.1557/mrs2003.12610.1557/mrs2003.126 ↗
3. 10.1016/S0032-3861(02)00829-710.1016/S0032-3861(02)00829-7 ↗
4. 10.1007/BF0118497910.1007/BF01184979 ↗
5. 10.1007/BF0035279310.1007/BF00352793 ↗
6. 10.1016/0266-3538(88)90060-710.1016/0266-3538(88)90060-7 ↗
7. 10.1016/0032-3861(96)83142-910.1016/0032-3861(96)83142-9 ↗
8. 10.1016/j.ijadhadh.2007.11.00410.1016/j.ijadhadh.2007.11.004 ↗
9. 10.1007/s10853-007-2390-310.1007/s10853-007-2390-3 ↗
10. 10.1016/0263-8223(95)00027-510.1016/0263-8223(95)00027-5 ↗
11. Caccavale, V. · 2007
12. 10.1007/s10853-008-3092-110.1007/s10853-008-3092-1 ↗
13. 10.1016/j.jmatprotec.2007.07.02810.1016/j.jmatprotec.2007.07.028 ↗
14. 10.1016/j.compositesa.2005.02.00710.1016/j.compositesa.2005.02.007 ↗
15. 10.1016/j.msea.2005.04.01410.1016/j.msea.2005.04.014 ↗
16. 10.1007/s10853-005-1716-210.1007/s10853-005-1716-2 ↗
17. 10.1007/s10853-006-0130-810.1007/s10853-006-0130-8 ↗
18. Summerscales, J. · Journal of Materials: Design and Application · 2005 · 219 · 45
19. 10.1016/j.polymer.2006.11.03810.1016/j.polymer.2006.11.038 ↗
20. American Society for Testing and Materials · 2003
21. American Society for Testing and Materials · 2003
22. 10.1016/0266-3538(88)90009-710.1016/0266-3538(88)90009-7 ↗
23. American Society for Testing and Materials · 2003
24. Mandell, J.F. · ASTM STP · 1983 · 813 · 55
25. Staff, C.R. · ASTM STP · 1983 · 813 · 78
26. Sun, C.T. · ASTM STP · 1979 · 674 · 418
27. 10.1016/j.compositesa.2005.03.02810.1016/j.compositesa.2005.03.028 ↗
28. 10.4028/www.scientific.net/RC.1410.4028/www.scientific.net/RC.14 ↗
29. 10.1007/BF0226521510.1007/BF02265215 ↗
30. 10.1098/rspa.1981.016310.1098/rspa.1981.0163 ↗
31. 10.1177/00219983760100020510.1177/002199837601000205 ↗
32. 10.1016/B0-08-043749-4/04100-810.1016/B0-08-043749-4/04100-8 ↗
33. 10.1016/j.compositesb.2007.03.00110.1016/j.compositesb.2007.03.001 ↗
34. 10.1016/0266-3538(96)00043-710.1016/0266-3538(96)00043-7 ↗
35. 10.1016/0142-1123(82)90001-910.1016/0142-1123(82)90001-9 ↗
36. Case, S.W.
37. 10.1007/BF0226521810.1007/BF02265218 ↗