Enhancement of Mechanical Properties of Composites through Incorporation of CNT in VARTM - A Review
Source abstract
Abstract
Some issues and development in the vacuum-assisted resin transfer molding (VARTM) technique and the use of carbon nanotubes (CNT) as additional reinforcement in laminated composite are discussed in this article. There has been considerable interest in the incorporation of CNT as secondary reinforcement in addition to the primary fiber reinforcement in laminated composites. The use of CNT is apparently able to enhance the out-of-plane material properties by improving interlaminar strength and fracture toughness of laminated composites. The addition of CNT may be done through the VARTM technique, a non-autoclave, relatively low-cost method, frequently used to fabricate parts with complex shapes. This survey shows that while the matrix-dominated interlaminar fracture toughness and shear properties may be improved, the improvement in in-plane fiber-dominated properties is very modest.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Mechanical Behavior of Composites · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576
Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576,
References (73)
Show source-provided references
1. Miravete, A. · 2007
2. TPI Technology, I. · 2005
3. Mazumdar, S.K. · 2002
4. Seemann, W.H. · 1990
5. Seemann, W.H. · 1991
6. Seemann, W.H. · 1998
7. Tunis, G.C. · 1999
8. Seemann, W.H. · 1999
9. Tunis, G.C. · 2000
10. Seemann, W.H. · 1994
11. Seemann, W.H. · 1995
12. Seemann, W.H. · 1997
13. Seemann, W.H. · 1997
14. Morey, B. ( 2007). Processes Reduce Composite Costs, In: Manufacturing Engineering, Vol. 138, No. 4, Society of Manufacturing Engineers, One SME Drive, Dearborn, Michigan, 48121 USA.
15. Adams, D.F. · 2003
16. 10.1016/S1359-835X(01)00012-410.1016/S1359-835X(01)00012-4 ↗
17. 10.1016/j.compscitech.2005.01.00110.1016/j.compscitech.2005.01.001 ↗
18. 10.1115/1.166903210.1115/1.1669032 ↗
19. 10.1016/j.compositesa.2005.03.01910.1016/j.compositesa.2005.03.019 ↗
20. 10.1016/j.compositesa.2004.05.00210.1016/j.compositesa.2004.05.002 ↗
21. 10.1016/S0266-3538(03)00179-910.1016/S0266-3538(03)00179-9 ↗
22. 10.1016/j.compositesa.2006.06.02110.1016/j.compositesa.2006.06.021 ↗
23. 10.1016/j.compscitech.2005.12.00810.1016/j.compscitech.2005.12.008 ↗
24. 10.1016/j.compositesa.2006.08.00510.1016/j.compositesa.2006.08.005 ↗
25. 10.1016/S1359-835X(03)00060-510.1016/S1359-835X(03)00060-5 ↗
26. 10.1016/j.compositesa.2004.10.03010.1016/j.compositesa.2004.10.030 ↗
27. 10.1088/0965-0393/12/3/S0810.1088/0965-0393/12/3/S08 ↗
28. 10.1177/002199830505351010.1177/0021998305053510 ↗
29. 10.1177/002199830934530610.1177/0021998309345306 ↗
30. 10.1016/j.compositesa.2006.02.01610.1016/j.compositesa.2006.02.016 ↗
31. 10.1016/S1359-835X(03)00091-510.1016/S1359-835X(03)00091-5 ↗
32. 2004
33. Polyworx. · 2008
34. 10.1016/S1359-835X(02)00047-710.1016/S1359-835X(02)00047-7 ↗
35. 10.1016/j.compositesa.2004.05.00110.1016/j.compositesa.2004.05.001 ↗
36. 10.1177/002199830706989810.1177/0021998307069898 ↗
37. Hsiao, K.-T. · Part I: Design and Algorithm Development, Composites Part A: Applied Science and Manufacturing · 2004 · 35 · 1149
38. 10.1016/j.compositesa.2004.04.00910.1016/j.compositesa.2004.04.009 ↗
39. 10.1038/354056a010.1038/354056a0 ↗
40. 10.1016/S1359-8368(02)00012-410.1016/S1359-8368(02)00012-4 ↗
41. 10.1016/S0266-3538(01)00094-X10.1016/S0266-3538(01)00094-X ↗
42. 2008
43. Hine, P. · Single Polymer Composites, Polymer · 2005 · 46 · 10936
44. 10.1016/j.compositesa.2005.02.00610.1016/j.compositesa.2005.02.006 ↗
45. 10.1016/j.carbon.2003.12.04310.1016/j.carbon.2003.12.043 ↗
46. 10.1063/1.151153210.1063/1.1511532 ↗
47. 10.1063/1.12650010.1063/1.126500 ↗
48. 10.1016/S0266-3538(02)00129-X10.1016/S0266-3538(02)00129-X ↗
49. 10.1016/j.matlet.2006.06.07410.1016/j.matlet.2006.06.074 ↗
50. Spindler-Ranta, S. · 2002
51. 10.1016/j.compositesa.2004.11.01710.1016/j.compositesa.2004.11.017 ↗
52. 10.1016/j.compositesa.2008.01.01510.1016/j.compositesa.2008.01.015 ↗
53. 10.1021/la062743p10.1021/la062743p ↗
54. Choi, O. · 2009
55. 10.1177/002199830809773510.1177/0021998308097735 ↗
56. 10.1088/0957-4484/18/27/27570810.1088/0957-4484/18/27/275708 ↗
57. 10.1016/j.compositesa.2007.11.01310.1016/j.compositesa.2007.11.013 ↗
58. 10.1016/j.compositesa.2005.09.01010.1016/j.compositesa.2005.09.010 ↗
59. 10.1038/nmat165010.1038/nmat1650 ↗
60. 10.1016/j.compositesa.2008.03.01110.1016/j.compositesa.2008.03.011 ↗
61. 10.1177/002199830910239810.1177/0021998309102398 ↗
62. 10.1177/002199830810079910.1177/0021998308100799 ↗
63. 10.1016/j.carbon.2005.01.00710.1016/j.carbon.2005.01.007 ↗
64. 10.1016/j.carbon.2005.03.03610.1016/j.carbon.2005.03.036 ↗
65. 10.1016/S0266-3538(02)00056-810.1016/S0266-3538(02)00056-8 ↗
66. 10.1016/j.polymer.2006.09.01310.1016/j.polymer.2006.09.013 ↗
67. 10.1016/j.polymer.2008.05.00510.1016/j.polymer.2008.05.005 ↗
68. 10.1016/j.compscitech.2004.04.00210.1016/j.compscitech.2004.04.002 ↗
69. 10.1016/j.mser.2005.04.00210.1016/j.mser.2005.04.002 ↗
70. 10.1016/j.polymer.2007.06.04610.1016/j.polymer.2007.06.046 ↗
71. 10.1016/j.eurpolymj.2004.11.04010.1016/j.eurpolymj.2004.11.040 ↗
72. 10.1021/cm990639610.1021/cm9906396 ↗
73. 10.2514/1.946810.2514/1.9468 ↗