Preparation and characterization of a newly developed polyamide composite utilising an affordable 3D printer
Source abstract
Abstract
In this work, the potential of polyamide composite prepared by a 3D printer was evaluated. Polyamide 12 was compounded with 5 wt% hydroxyapatite and 15 wt% zirconium oxide fillers via a twin screw extruder. The compound was then pelletized prior to the preparation of the filament by a desktop filament extruder. The filament was finally applied to a 3D printer to prepare the printed tensile samples. Pure polyamide 12 and commercial polyamide filament, Taulman 618, were also printed and tested for control. Melt flow and thermal analysis were carried out to estimate the processing conditions. Tensile test was also conducted to evaluate the strength and modulus. The new polyamide composite was successfully prepared and tested. The strength of polyamide composite was comparable to Taulman 618. The modulus of the composite was improved due to the incorporation of fillers. The morphology of the printed composite was porous, which could provide pros and cons to biological and mechanical properties, respectively. Polyamide composite presented a promising polymer material for a 3D printer and may be applied for biomaterial application.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Nibong Tebal, Pulau Pinang, Malaysia
School of Dental Sciences, Health Campus, Universiti Sains Malaysia, Kubang Kerian, Kelantan, Malaysia
References (21)
Show source-provided references
1. The Freedonia Group, Inc. World 3D Printing: Additive Manufacturing Industry Study with Forecasts for 2017 & 2022. Report, Freedonia, OH, 2013.
2. 3D printer and 3D printing news. 3D Printing Basics, www.3ders.org/3d-printing-basics.html (accessed 30 June 2014).
3. Instructables. Faq about printing with nylon and new materials . www.instructables.com/id/2BEIGH3-3D-Printer-Update-and-call-for-Testers/step3/faq-about-printing-with-Nylon-and-new-materials (accessed 30 May 2014).
4. 10.1166/mex.2014.114810.1166/mex.2014.1148 ↗
5. 10.1002/pen.2363610.1002/pen.23636 ↗
6. 10.1007/s00289-008-1014-710.1007/s00289-008-1014-7 ↗
7. Mehrabanian M · Int J Nanomed · 2011 · 6 · 1651
8. 10.1016/j.compositesb.2006.05.00610.1016/j.compositesb.2006.05.006 ↗
9. 10.1016/j.polymdegradstab.2005.02.00610.1016/j.polymdegradstab.2005.02.006 ↗
10. 10.1023/A:102068130957210.1023/A:1020681309572 ↗
11. Elmore T. Instruction and assembly manual for filastruder version 1.3. Available at: http://www.soliforum.com/topic/2036/filastruder-documentation-and-cadstl-files/ (accessed December 2013).
12. 10.1002/pc.2053810.1002/pc.20538 ↗
13. Saudi Basic Industries Corp. Material data sheet Cycolac™ Resin MG94, 2015.
14. Cowie JMG and Arrighi V. Polymers: Chemistry and physics of modern materials , 3rd ed. Boca Raton, FL, USA: Taylor & Francis Group, 2008, pp.279–282.
15. 10.1016/S0032-3861(03)00344-610.1016/S0032-3861(03)00344-6 ↗
16. 10.1016/j.compscitech.2010.12.02810.1016/j.compscitech.2010.12.028 ↗
17. Boots Industries. The importance of high quality filament in 3D printing . bootsindustries.com/portfolio-item/importance-of-good-filament (accessed 19 December 2014).
18. 10.1016/j.matlet.2014.05.11110.1016/j.matlet.2014.05.111 ↗
19. 10.1016/S0142-9612(01)00232-010.1016/S0142-9612(01)00232-0 ↗
20. 10.1177/088532820504804410.1177/0885328205048044 ↗
21. 10.1002/mame.20140006610.1002/mame.201400066 ↗