journal article·2014-09Open access

Dynamic mechanical properties of epoxy/flax fibre composites

Fabien Duc, Pierre-Etienne Bourban, Jan-Anders E Månson

Abstract

The mechanical and damping properties were measured for unidirectional, 0/90 and twill 2/2 flax fibre (FF) composites containing 40 vol% of fibres in an epoxy matrix. All composites were processed by resin transfer moulding. The influence of the impregnation quality, the fibre/matrix adhesion, the quality of the fibres, the twist angle of the FF yarns and the crimp in the FF fabrics on these properties were quantified. Twisted yarns in an unidirectional FF fabric impacted negatively on the stiffness while increasing the damping of about 57% through enhancement of the intra-yarn friction. In twill 2/2 fabrics, twisted yarns decreased Young's modulus owing to the induced crimp but increased the damping through enhanced inter-yarn friction. With improved fibre/matrix adhesion, a damping increase up to 109% was obtained through better activation of the intrinsic damping mechanisms of an elementary FF. The best compromise between damping and stiffness was obtained with FF having less dislocations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Textile materials and evaluations · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratoire de Technologie des Composites et Polymères (LTC), Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland

References (20)

Show source-provided references
1. 10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W ↗
2. Huda MS, Drzal LT, Ray D, et al. Natural-fiber composites in the automotive sector. In: Pickering KL (ed.) Properties and performance of natural-fibre composites. Cambridge, England: Woodhead Publishing Ltd.; Boca Raton, USA: CRC Press LLC, 2008.10.1533/9781845694593.2.221 ↗
3. 10.1002/masy.1998127012810.1002/masy.19981270128 ↗
4. 10.1016/S1359-8368(98)00054-710.1016/S1359-8368(98)00054-7 ↗
5. 10.1002/(SICI)1097-4628(19990124)71:4<531::AID-APP2>3.0.CO;2-I10.1002/(SICI)1097-4628(19990124)71:4<531::AID-APP2>3.0.CO;2-I ↗
6. 10.1002/(SICI)1097-4628(19960531)60:9<1483::AID-APP23>3.0.CO;2-110.1002/(SICI)1097-4628(19960531)60:9<1483::AID-APP23>3.0.CO;2-1 ↗
7. 10.1016/S1359-835X(00)00083-X10.1016/S1359-835X(00)00083-X ↗
8. 10.1016/S0266-3538(00)00168-810.1016/S0266-3538(00)00168-8 ↗
9. 10.1016/S1359-835X(99)00097-410.1016/S1359-835X(99)00097-4 ↗
10. 10.1002/pc.1033510.1002/pc.10335 ↗
11. 10.1016/S0266-3538(99)00188-810.1016/S0266-3538(99)00188-8 ↗
12. Verpoest II, Baets J, Acker JV, et al. Flax and Hemp fibres: a natural solution for the composite industry. In: Verpoest II and Reux F (eds) JEC composites . Paris: JEC, 2012.
13. 10.1016/S0924-0136(03)00195-X10.1016/S0924-0136(03)00195-X ↗
14. Talib RA · Compos Sci Technol · 2011 · 471 · 815
15. Duc F, Bourban P-E and Manson J-AE. Damping of thermoset and thermoplastic flax fibre composites. Submitted to Compos Part A .
16. 10.1023/A:101388142210610.1023/A:1013881422106 ↗
17. 10.1016/j.matdes.2007.03.02710.1016/j.matdes.2007.03.027 ↗
18. 10.1016/j.matdes.2012.10.01910.1016/j.matdes.2012.10.019 ↗
19. 10.1016/j.indcrop.2004.06.00110.1016/j.indcrop.2004.06.001 ↗
20. 10.1016/j.carbpol.2011.07.03510.1016/j.carbpol.2011.07.035 ↗