journal article·2010-04

Effect of Nanoclay on the Mechanical and Morphological Properties of Wood Polymer Nanocomposite

Amir Hooman Hemmasi, Habibolah Khademi-Eslam, Mohamad Talaiepoor, Behzad Kord, Ismaeil Ghasemi

Publisher page

Abstract

Polypropylene/wood flour composites with different nanoclay and maleic anhydride grafted polypropylene (PP-g-MA) contents were fabricated by melt compounding and then by injection molding. The mechanical properties, such as flexural modulus, tensile modulus, elongation at break, and impact strength, were evaluated. Results indicated that the flexural modulus, tensile modulus, and elongation at break increases with increase of nanoclay up to 3 phc at the same concentration of PP-g-MA, and then decreases. However, the impact strength of the composites decreases with increased nanoclay loading. Also, the effect of compatibilzer was positive in terms of enhancing the mechanical properties of the composites. The morphology of the nanocomposites has been examined by using X-ray diffraction and transmission electron microscopy. Morphological findings revealed that intercalation form, the sample with 3 phc concentration of clay, which implies the formation of the intercalation morphology and better dispersion than 6 phc, and the d-spacing of clay layers in the composite were improved in the presence of compatibilizer.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Natural Fiber Reinforced Composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Wood and Paper Science and Technology Islamic Azad University, Science & Research Branch P.O. Box 14515/775, Tehran, Iran

Department of Wood and Paper Science and Technology Islamic Azad University, Science & Research Branch P.O. Box 14515/775, Tehran, Iran,

Iran Polymer and Petrochemical Institute P.O. Box 14965/115, Tehran, Iran

References (36)

Show source-provided references
1. 10.1002/pen.76024150410.1002/pen.760241504 ↗
2. Bledzki, A.K. · Journal of Polymer Science · 1999 · 24 · 221
3. Leao, A.L. · 1997
4. 10.1002/app.2168510.1002/app.21685 ↗
5. Park, C.B. · Journal of Ploymer Engineering Science · 2005 · 38 · 212
6. Kokta, B.V. · Composites · 1990 · 3 · 529
7. 10.1163/156856189X0005610.1163/156856189X00056 ↗
8. 10.1002/vnl.73015011110.1002/vnl.730150111 ↗
9. 10.1016/S0014-3057(00)00243-310.1016/S0014-3057(00)00243-3 ↗
10. 10.1016/S1359-835X(01)00071-910.1016/S1359-835X(01)00071-9 ↗
11. 10.1016/S0266-3538(01)00219-610.1016/S0266-3538(01)00219-6 ↗
12. 10.1016/S0266-3538(03)00084-810.1016/S0266-3538(03)00084-8 ↗
13. Tjong, S.C. · Journal of Material Science and Engineering · 2006 · 53 · 73
14. 10.1002/pat.85210.1002/pat.852 ↗
15. Alexandre, M. · Journal of Material Science and Engineering · 2000 · 28 · 1
16. Viswanathan, V. · Journal of Material Science and Engineering · 2006 · 54 · 121
17. 10.1016/j.progpolymsci.2003.08.00210.1016/j.progpolymsci.2003.08.002 ↗
18. Asif, A. · Morphology and Thermomechanical Properties, Journal of Applied Polymer Science · 2007 · 103 · 3793
19. 10.1002/app.2472710.1002/app.24727 ↗
20. Chen, H. · Journal of Applied Polymer Science · 2007 · 103 · 4451
21. 10.1002/app.2537810.1002/app.25378 ↗
22. 10.1002/pc.2028410.1002/pc.20284 ↗
23. 10.1177/089270570808947610.1177/0892705708089476 ↗
24. Wu, Q. · Journal of Plastic Technology · 2007 · 27 · 108
25. 10.1016/S0032-3861(01)00509-210.1016/S0032-3861(01)00509-2 ↗
26. Hetzer, M. · Journal of Chemical Engineering · 2008 · 16 · 1016
27. Koo, C.M. · Journal of Macromolecules · 2002 · 35 · 511610.1021/ma011770d ↗
28. Lei, Y. · Journal of Applied Polymer Science · 2007 · 18 · 1425
29. Gauthier, T.C. · Correlation with Adhesion and Aging in Moisture, Polymer Composites · 1998 · 19 · 287
30. 10.1002/pen.1084610.1002/pen.10846 ↗
31. 10.1002/(SICI)1097-4628(19980613)68:11<1845::AID-APP16>3.0.CO;2-T10.1002/(SICI)1097-4628(19980613)68:11<1845::AID-APP16>3.0.CO;2-T ↗
32. 10.1080/0360255900804984910.1080/03602559008049849 ↗
33. Han, G. · Journal of Polymer Enviroment · 2008 · 21 · 1567
34. 10.1016/j.polymdegradstab.2006.09.00110.1016/j.polymdegradstab.2006.09.001 ↗
35. 10.1002/app.2551210.1002/app.25512 ↗
36. Yuan, Q. · Journal of Applied Polymer Science · 2006 · 47 · 4421