journal article·2008-11

Feasibility of Using Heat Treated Wood in Wood/Thermoplastic Composites

Alireza Kaboorani, Mehdi Faezipour, Ghanbar Ebrahimi

Publisher page

Abstract

Using wood and other natural fibers with thermoplastic materials is always associated with a problem: poor compatibility between wood fibers and thermoplastic matrix. This paper deals with the mentioned problem and tries to solve, or at least ease, it through pre-heat treatment of wood prior to blending of wood fibers with other components of composites. In this study, wood pre-heat treated at different temperatures (175, 190 and 205°C) was used at various loadings (25 and 50%) with high density polyethylene (HDPE) and polypropylene-maleic anhydride copolymer (MAPP) to produce composites. The composite properties, including mechanical performance and morphological character, were investigated. The results of this study show that pre-heat treatment temperature and coupling agent content did not impact the composite properties at 25% wood content. Adding treated wood at 50% level to the composites enhanced the mechanical properties in comparison with untreated wood. The degree of the enhancement depended on pre-heat treatment temperature. Using wood treated at 190°C resulted in composites with the highest modulus of rupture (MOR) and tensile strength. In terms of modulus of elasticity (MOE), composites having wood treated at 205°C showed the highest MOE in both tensile and flexural tests. Adding 2% coupling agent caused an improvement in modulus of rupture (MOR) and tensile strength. An increase in wood content from 25 to 50% deceased strain at maximum load drastically. Morphological study showed that the mode of fracture is a function of wood and coupling agent content, and pre-heat treatment temperature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Wood Treatment and Properties · Bamboo properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Wood and Paper Technology, Faculty of Natural Recourses University of Tehran, Karaj, Iran,

Department of Wood and Paper Technology, Faculty of Natural Recourses University of Tehran, Karaj, Iran

References (13)

Show source-provided references
1. Sain, M.
2. Boonstra, M.J., Tjeerdsma, B.F. and Groeneveld, H.A.C. (1998). Thermal Modification of Non-Durable Wood Species, IRG/WP 98-40123, p. 13.
3. 10.1007/BF0260726810.1007/BF02607268 ↗
4. 10.1007/BF0260849810.1007/BF02608498 ↗
5. Kamdem, D.P., Pizzi, A., Guyonnet, R. and Jermannaud, A. (1999). Durability of Heat-Treated Wood, IRG/WP 99-40145 , p. 15.
6. Kubinsky, E. · Holzforschung · 1971 · 23 · 1
7. Jämsä , S. and Viitaniemi, P. (1998). Heat Treatment of Wood. Better Durability Without Chemicals, Nordiske Trebeskyttelsesdager, 47-51.
8. Seborg, R.M. · Journal of Forest Products Research Society · 1953 · 3 · 59
9. Stamm, A.J. · 1946
10. 10.1007/s00107005028710.1007/s001070050287 ↗
11. Viitanen, H.A. , Jämsä, S., Paajanen , L.M., Nurmi, A.J. and Viitaniemi , P. (1994). The Effect of Heat Treatment on the Properties of Spruce. IRG/WP 94-40032 , p. 4.
12. 10.1016/S0266-3538(02)00080-510.1016/S0266-3538(02)00080-5 ↗
13. 10.1021/ie00044a04110.1021/ie00044a041 ↗