Effect of montmorillonite nanoclay on temperature dependence mechanical properties of naturally woven coconut sheath/polyester composite
Source abstract
Abstract
The untreated, NaOH and silane-treated naturally woven coconut sheath/polyester composites have been developed using compression molding technique by varying the weight percentage (1, 2, 3, and 5 wt%) of organically modified montmorillonite (MMT) nanoclay to find the mechanical properties as a function of temperature. X-ray diffraction, scanning electron microscope and transmission electron microscope have been performed to understand the distribution of nanoclay mechanism and morphological structure of treated coconut sheath fiber. Dynamic mechanical analysis revealed a decrease in storage modulus ( E ′) with the increase in temperature by a considerable fall in the temperature range of 50℃ to 110℃. The loss modulus ( E ″) and damping peaks (tan δ) were found to be higher after the chemical treatment of coconut sheath. The maximum increase in E ′ and E ″ values were found in the case of silane-treated composites. In all types of composites, the dynamic factors were observed to increase with the incorporation of nanoclay but the anomalous trend was noticed according to the wt%. A slight increase in shift of glass transition temperature value was noticed in association with the E ″ peaks for silane and NaOH-treated composites compared to untreated composites.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Natural Fiber Reinforced Composites · Polymer Nanocomposite Synthesis and Irradiation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centre for Composite Materials, Department of Mechanical Engineering, Kalasalingam University, Krishnankoil, Virudhunagar, Tamil Nadu
Center for Advanced Materials, Department of Mechanical Engineering, Cape Institute of Technology, Levengipuram, Tirunelveli, Tamil Nadu
References (46)
Show source-provided references
1. 10.1016/S0032-3861(02)00090-310.1016/S0032-3861(02)00090-3 ↗
2. 10.1016/S0032-3861(01)00645-010.1016/S0032-3861(01)00645-0 ↗
3. 10.1021/cm980448n10.1021/cm980448n ↗
4. 10.1002/pat.85210.1002/pat.852 ↗
5. 10.1016/j.progpolymsci.2008.07.00810.1016/j.progpolymsci.2008.07.008 ↗
6. 10.1002/polb.109010.1002/polb.1090 ↗
7. 10.1016/S0169-1317(99)00017-410.1016/S0169-1317(99)00017-4 ↗
8. 10.1016/S0032-3861(00)00346-310.1016/S0032-3861(00)00346-3 ↗
9. 10.1021/cm960102h10.1021/cm960102h ↗
10. 10.1016/j.compositesa.2005.05.02710.1016/j.compositesa.2005.05.027 ↗
11. 10.1016/S0032-3861(01)00561-410.1016/S0032-3861(01)00561-4 ↗
12. Jawahar P, Balasubramanian M. Thermal, mechanical and water barrier properties of clay-unsaturated polyester nanocomposites. J Polym-Plas Technol 2005; 9: 472–481.
13. 10.1021/cm00048a00610.1021/cm00048a006 ↗
14. 10.1177/073168441143197110.1177/0731684411431971 ↗
15. 10.1177/09673911090170010810.1177/096739110901700108 ↗
16. 10.1177/073168441142089410.1177/0731684411420894 ↗
17. 10.1002/app.1970.07014060410.1002/app.1970.070140604 ↗
18. 10.1016/0266-3538(93)90010-E10.1016/0266-3538(93)90010-E ↗
19. 10.1007/BF0035425910.1007/BF00354259 ↗
20. 10.1002/(SICI)1097-4628(19961121)62:8<1199::AID-APP9>3.0.CO;2-D10.1002/(SICI)1097-4628(19961121)62:8<1199::AID-APP9>3.0.CO;2-D ↗
21. 10.1002/(SICI)1097-4628(19970620)64:12<2467::AID-APP21>3.0.CO;2-X10.1002/(SICI)1097-4628(19970620)64:12<2467::AID-APP21>3.0.CO;2-X ↗
22. 10.1002/(SICI)1097-4628(19990124)71:4<531::AID-APP2>3.0.CO;2-I10.1002/(SICI)1097-4628(19990124)71:4<531::AID-APP2>3.0.CO;2-I ↗
23. 10.1016/S0266-3538(02)00005-210.1016/S0266-3538(02)00005-2 ↗
24. 10.1016/S0266-3538(98)00169-910.1016/S0266-3538(98)00169-9 ↗
25. 10.1002/(SICI)1097-4628(19990228)71:9<1505::AID-APP15>3.0.CO;2-110.1002/(SICI)1097-4628(19990228)71:9<1505::AID-APP15>3.0.CO;2-1 ↗
26. 10.1007/s10853-006-1370-310.1007/s10853-006-1370-3 ↗
27. 10.1177/073168440708136810.1177/0731684407081368 ↗
28. 10.1002/pc.2113810.1002/pc.21138 ↗
29. 10.1080/03602559.2011.59308910.1080/03602559.2011.593089 ↗
30. 10.4028/www.scientific.net/NH.2.8710.4028/www.scientific.net/NH.2.87 ↗
31. 10.1023/A:102674331429110.1023/A:1026743314291 ↗
32. 10.1002/(SICI)1097-4628(19970110)63:2<247::AID-APP12>3.0.CO;2-#10.1002/(SICI)1097-4628(19970110)63:2<247::AID-APP12>3.0.CO;2-# ↗
33. 10.1016/j.compositesa.2005.03.03510.1016/j.compositesa.2005.03.035 ↗
34. 10.1016/S0168-1656(97)00084-910.1016/S0168-1656(97)00084-9 ↗
35. 10.1016/j.matdes.2010.06.00410.1016/j.matdes.2010.06.004 ↗
36. 10.1016/j.compositesa.2009.01.00110.1016/j.compositesa.2009.01.001 ↗
37. 10.1002/pc.2025010.1002/pc.20250 ↗
38. 10.1016/S0032-3861(97)10040-410.1016/S0032-3861(97)10040-4 ↗
39. 10.1177/073168441245525910.1177/0731684412455259 ↗
40. Huda MS, Drazal LT, Mohanty AK, . Chopped glass an recycled newspaper as reinforcement fibers in injection molded poly (lactic acid) (PLA) composites: A comparative study. Compos Sci Technol 2003; 6: 1813–1824.
41. 10.1007/s12221-011-0506-510.1007/s12221-011-0506-5 ↗
42. 10.1016/j.compscitech.2005.06.01410.1016/j.compscitech.2005.06.014 ↗
43. 10.1002/pc.2088010.1002/pc.20880 ↗
44. 10.1002/pc.2025010.1002/pc.20250 ↗
45. 10.1016/j.compscitech.2007.06.02210.1016/j.compscitech.2007.06.022 ↗
46. 10.1016/S0266-3538(02)00254-310.1016/S0266-3538(02)00254-3 ↗