journal article·2013-10Open access

Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites

Nathan W Manthey, Francisco Cardona, Gaston Francucci, Thiru Aravinthan

Abstract

Novel epoxidized hemp oil-based biocomposites containing jute fibre reinforcement were produced at the Centre of Excellence in Engineered Fibre Composites (CEEFC) owing to the need to develop new types of biobased materials. Mechanical properties (tensile, flexural, Charpy impact and interlaminar shear), thermo-mechanical properties (glass transition temperature, storage modulus and crosslink density) and moisture-absorption properties (saturation moisture level and diffusion coefficient) were investigated and compared with samples containing commercially produced epoxidized soybean oil and a synthetic bisphenol A diglycidyl ether-based epoxy control, R246TX cured with a blend of triethylenetetramine and isophorone diamine. Scanning electron microscopy was also performed to investigate the fibre–matrix interface. Epoxidized hemp oil-based samples were found to have marginally superior mechanical, dynamic mechanical and similar water-absorption properties in comparison to samples made with epoxidized soybean oil bioresin; however, both sample types were limited to bioresin concentrations below 30%. Synthetic epoxy-based samples exhibited the highest mechanical, dynamic mechanical and lowest water-absorption properties of all investigated samples. This study has also determined that epoxidized hemp oil-based bioresins when applied to jute fibre-reinforced biocomposites can compete with commercially produced epoxidized soybean oil in biocomposite applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Polymer composites and self-healing · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre of Excellence in Engineered Fibre Composites (CEEFC), Faculty of Engineering and Surveying, University of Southern Queensland, Toowoomba, Queensland, Australia

Composite Materials Group, Research Institute of Material Science and Technology (INTEMA-CONICET), Materials Engineering Department, Engineering Faculty, National University of Mar del Plata, Mar del Plata, Argentina

References (46)

Show source-provided references
1. 10.1016/j.carbpol.2007.05.04010.1016/j.carbpol.2007.05.040 ↗
2. 10.1016/j.compscitech.2003.09.02410.1016/j.compscitech.2003.09.024 ↗
3. 10.1016/S0921-5093(99)00556-010.1016/S0921-5093(99)00556-0 ↗
4. 10.1016/S1359-835X(98)00116-X10.1016/S1359-835X(98)00116-X ↗
5. 10.1016/j.compositesa.2003.09.01610.1016/j.compositesa.2003.09.016 ↗
6. 10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X ↗
7. Wool R · 2005
8. Adekunle K · J Appl Polym Sci · 2010 · 116 · 175910.1002/app.31634 ↗
9. 10.1002/app.3141110.1002/app.31411 ↗
10. 10.1002/app.2745810.1002/app.27458 ↗
11. 10.1002/app.2454810.1002/app.24548 ↗
12. 10.1002/app.2442310.1002/app.24423 ↗
13. Chandrashekhara K, Flanigan V, Berring N, et al. Pultrudable resin from soybean oil. In: Proceedings of the 44th international SAMPE symposium and exhibition , Long Beach, CA, 23–27 May 1999, pp. 1857–1865.
14. 10.1002/masy.20065101010.1002/masy.200651010 ↗
15. 10.1002/masy.20065137710.1002/masy.200651377 ↗
16. 10.1016/j.compstruct.2005.04.01810.1016/j.compstruct.2005.04.018 ↗
17. Espinoza-Pérez J, Wiesenborn D, Haagenson D, et al. Study of the process parameters of the canola oil epoxidation.In: ASABE annual international meeting , Providence, RI, 29 June–2 July 2008.
18. Espinoza-Pérez J, Wiesenborn D, Kristi T, et al. Preparation and partial characterization of canola-based epoxy resins for bio-based plastic composites. In: ASABE annual international meeting , Minneapolis, MN, 17–20 June 2007.
19. Espinoza-Pérez J, Wiesenborn D, Ulven C, et al. Epoxy resins from high-oleic oils applied to composites. In: ASABE annual international meeting , Reno, NV, 21–24 June 2009.
20. 10.1002/app.2104410.1002/app.21044 ↗
21. 10.1002/pi.228010.1002/pi.2280 ↗
22. 10.1002/app.189710.1002/app.1897 ↗
23. Meyer P · Thammasat Int J Sci Technol · 2008 · 13 · 1
24. 10.1002/pc.2009910.1002/pc.20099 ↗
25. 10.1002/marc.20030019110.1002/marc.200300191 ↗
26. 10.1002/1438-9312(200205)104:5<293::AID-EJLT293>3.0.CO;2-W10.1002/1438-9312(200205)104:5<293::AID-EJLT293>3.0.CO;2-W ↗
27. 10.1002/app.2786610.1002/app.27866 ↗
28. 10.1002/app.1357110.1002/app.13571 ↗
29. 10.3144/expresspolymlett.2011.4710.3144/expresspolymlett.2011.47 ↗
30. 10.3144/expresspolymlett.2013.2510.3144/expresspolymlett.2013.25 ↗
31. Manthey NW, Cardona F and Aravinthan T. Mechanical properties of epoxidized hemp oil based biocomposites: preliminary results. In: The first international postgraduate conference on engineering, designing and developing the built environment for sustainable wellbeing (ed Cowled C), Brisbane, Queensland, 2011. Queensland: Queensland University of Technology, pp. 100–105.
32. 10.1002/app.3408610.1002/app.34086 ↗
33. Manthey NW, Cardona F, Aravinthan T, et al. Natural fibre composites with QLD based fibres and vegetable oils. In: 21st Australasian conference on the mechanics of structures and materials: incorporating sustainable practice in mechanics of structures and materials (ACMSM21) , (eds Fragomeni S, Venkatesan S, Lam N and Setunge S), Victoria, Melbourne, Australia, 7–10 December 2010. Balkema, The Netherlands: CRC Press, pp. 469-473.10.1201/b10571-83 ↗
34. 10.1016/j.biortech.2007.07.01510.1016/j.biortech.2007.07.015 ↗
35. 10.1002/ejlt.20060029810.1002/ejlt.200600298 ↗
36. 10.1021/ie060146s10.1021/ie060146s ↗
37. 10.1177/002199830706989610.1177/0021998307069896 ↗
38. 10.1002/mame.20040000310.1002/mame.200400003 ↗
39. 10.1016/j.msea.2005.08.06610.1016/j.msea.2005.08.066 ↗
40. Espinoza-Pérez J, Wiesenborn D, Tostenson K, et al. Canola-based epoxy resins applied to plastic composites. In: 2007 ASABE/CSBE north central intersectional conference , Fargo, North Dakota, USA, 2007.
41. Tatlari M · 2008
42. 10.1002/pen.2029010.1002/pen.20290 ↗
43. 10.1002/pc.2025010.1002/pc.20250 ↗
44. 10.1016/j.compstruct.2012.07.01910.1016/j.compstruct.2012.07.019 ↗
45. 10.1016/j.compscitech.2009.04.01410.1016/j.compscitech.2009.04.014 ↗
46. 10.1080/0360255100368204210.1080/03602551003682042 ↗