journal article·2018-01

Structural analysis and mechanical properties of lignite fly-ash-added jute–epoxy polymer matrix composite

GK Sathishkumar, G Rajkumar, K Srinivasan, MJ Umapathy

Publisher page

Abstract

The role of lignite fly ash in determining the physical properties of polymer matrix composite is studied in the present investigation. For that, different compositions of polymer matrix composite were prepared using epoxy polymer resin with lignite fly ash and jute fiber in the combination of (90 − x) EP − 10 JF − xLFA (where x = 0, 0.5, 1, 1.5, 2, and 2.5 wt.%) through hand layup technique followed by light compression molding technique. The changes in the physical properties of polymer matrix composite, when fly ash was added, were found to be quite interesting. A linear increase in mechanical strength such as compressive strength, tensile strength, flexural strength, impact energy, and barcol hardness was observed up to the addition of 2 wt.% fly ash content in the polymer matrix composite. Scanning electron microscope image of the composite sample EPJF2.0 showed the distribution of the fly ash, minimal voids, and fiber pullouts presented at the fractured surface. Of all the prepared polymer matrix composites, the sample EPJF2.0 showed a higher mechanical strength and better thermal stability than the other samples.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Flame retardant materials and properties · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Easwari Engineering College, Chennai, Tamil Nadu, India

Department of Physics, Easwari Engineering College, Chennai, Tamil Nadu, India

Department of Chemistry, College of Engineering Guindy, Anna University, Chennai, Tamil Nadu, India

References (60)

Show source-provided references
1. 10.1016/j.compositesb.2013.02.03310.1016/j.compositesb.2013.02.033 ↗
2. 10.1016/j.compositesb.2012.12.00410.1016/j.compositesb.2012.12.004 ↗
3. 10.1016/S0266-3538(01)00021-510.1016/S0266-3538(01)00021-5 ↗
4. 10.1016/S0266-3538(02)00267-110.1016/S0266-3538(02)00267-1 ↗
5. 10.1016/j.compositesa.2008.05.00810.1016/j.compositesa.2008.05.008 ↗
6. 10.1016/j.biortech.2009.04.06710.1016/j.biortech.2009.04.067 ↗
7. 10.1016/j.compositesa.2009.04.01510.1016/j.compositesa.2009.04.015 ↗
8. 10.1016/j.compositesa.2014.05.00110.1016/j.compositesa.2014.05.001 ↗
9. 10.1016/j.compositesb.2014.08.03210.1016/j.compositesb.2014.08.032 ↗
10. 10.1016/j.compositesa.2003.09.01610.1016/j.compositesa.2003.09.016 ↗
11. 10.1016/j.compstruct.2016.01.09810.1016/j.compstruct.2016.01.098 ↗
12. 10.1002/pc.2122410.1002/pc.21224 ↗
13. 10.1016/j.compositesa.2015.08.03810.1016/j.compositesa.2015.08.038 ↗
14. 10.1016/j.enbuild.2016.12.07910.1016/j.enbuild.2016.12.079 ↗
15. 10.1016/j.matpr.2015.07.03110.1016/j.matpr.2015.07.031 ↗
16. 10.1016/S1359-835X(98)00157-210.1016/S1359-835X(98)00157-2 ↗
17. 10.1016/S1359-835X(00)00101-910.1016/S1359-835X(00)00101-9 ↗
18. 10.1016/j.proeng.2013.01.07910.1016/j.proeng.2013.01.079 ↗
19. 10.1016/0142-9418(90)90029-D10.1016/0142-9418(90)90029-D ↗
20. 10.1016/j.compositesa.2008.08.00210.1016/j.compositesa.2008.08.002 ↗
21. 10.1007/s10965-005-9040-810.1007/s10965-005-9040-8 ↗
22. Ching-Wen L · J Mater Process Technol · 2007 · 192 · 428
23. 10.1016/S1359-835X(01)00071-910.1016/S1359-835X(01)00071-9 ↗
24. 10.1016/S0263-8223(03)00179-X10.1016/S0263-8223(03)00179-X ↗
25. 10.1016/j.compstruct.2005.01.01310.1016/j.compstruct.2005.01.013 ↗
26. 10.1016/j.compstruct.2005.06.00510.1016/j.compstruct.2005.06.005 ↗
27. 10.1016/j.conbuildmat.2015.10.12710.1016/j.conbuildmat.2015.10.127 ↗
28. 10.1016/j.conbuildmat.2015.07.18010.1016/j.conbuildmat.2015.07.180 ↗
29. 10.1016/j.conbuildmat.2016.03.02310.1016/j.conbuildmat.2016.03.023 ↗
30. 10.1016/j.conbuildmat.2005.12.02410.1016/j.conbuildmat.2005.12.024 ↗
31. 10.1016/S0008-8846(99)00180-510.1016/S0008-8846(99)00180-5 ↗
32. Alavudeen A · Design · 2015 · 66 · 246
33. 10.1016/j.compositesb.2015.10.03010.1016/j.compositesb.2015.10.030 ↗
34. 10.1111/j.1551-2916.2010.04009.x10.1111/j.1551-2916.2010.04009.x ↗
35. ASTM Standard D695, 2015, Standard Test Method for Compressive Properties of Rigid Plastics. ASTM International, West Conshohocken, PA, 2015. DOI: 10.1520/D0695-15.10.1520/D0695-15 ↗
36. ASTM Standard D638, 2014, Standard Test Method for Tensile Properties of Plastics. ASTM International, West Conshohocken, PA, 2014. DOI: 10.1520/D0638-14.10.1520/D0638-14 ↗
37. ASTM Standard D790, 2015, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. ASTM International, West Conshohocken, PA, 2015. DOI: 10.1520/D0790-15.10.1520/D0790-15 ↗
38. ASTM Standard D6110, 2010, Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics. ASTM International, West Conshohocken, PA, 2010. DOI: 10.1520/D6110-10.10.1520/D6110-10 ↗
39. ASTM Standard D2583, 2013a, Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor. ASTM International, West Conshohocken, PA, 2013. DOI: 10.1520/D2583-13A.10.1520/D2583-13A ↗
40. ASTM Standard G99, 2005 (2016), Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus. ASTM International, West Conshohocken, PA, 2016. DOI: 10.1520/G0099-05R16.10.1520/G0099-05R16 ↗
41. 10.1111/j.1551-2916.2012.05422.x10.1111/j.1551-2916.2012.05422.x ↗
42. 10.1080/10426507.2012.69011510.1080/10426507.2012.690115 ↗
43. 10.1016/j.conbuildmat.2014.07.09610.1016/j.conbuildmat.2014.07.096 ↗
44. 10.1016/j.compositesa.2012.05.00710.1016/j.compositesa.2012.05.007 ↗
45. 10.1016/j.jclepro.2014.04.06010.1016/j.jclepro.2014.04.060 ↗
46. 10.1016/j.compositesb.2013.12.03610.1016/j.compositesb.2013.12.036 ↗
47. 10.1016/0043-1648(94)06546-210.1016/0043-1648(94)06546-2 ↗
48. 10.1016/j.wear.2007.01.02610.1016/j.wear.2007.01.026 ↗
49. Raghavendra LS · IJIRSET · 2013 · 2 · 1652
50. 10.1016/j.carbpol.2012.12.03510.1016/j.carbpol.2012.12.035 ↗
51. 10.1016/j.msea.2011.01.02610.1016/j.msea.2011.01.026 ↗
52. 10.1016/j.compscitech.2006.04.01310.1016/j.compscitech.2006.04.013 ↗
53. 10.1016/j.carbpol.2010.05.01510.1016/j.carbpol.2010.05.015 ↗
54. 10.1016/j.compositesa.2008.07.00710.1016/j.compositesa.2008.07.007 ↗
55. 10.1016/j.fuel.2006.12.01310.1016/j.fuel.2006.12.013 ↗
56. 10.1016/j.jiec.2007.07.00210.1016/j.jiec.2007.07.002 ↗
57. 10.1163/15685610477363548110.1163/156856104773635481 ↗
58. 10.1016/S0079-6700(98)00018-510.1016/S0079-6700(98)00018-5 ↗
59. 10.1016/S0016-2361(02)00272-710.1016/S0016-2361(02)00272-7 ↗
60. 10.1016/j.cemconres.2003.11.01310.1016/j.cemconres.2003.11.013 ↗