journal article·2017-11

Design optimization of molds for autoclave process of composite manufacturing

Qing Wang, Lingyun Wang, Weidong Zhu, Qiang Xu, Yinglin Ke

Publisher page

Abstract

Autoclave process is widely used in manufacturing processes for thermosetting matrix composite materials. During the process, the non-uniformity of temperature distribution in autoclave may result in non-synchronous curing of composite, which in turn reduces the mechanical properties of composite parts. In order to improve the curing performance, design optimization of autoclave molds has to be performed. In this paper, a finite volume method based numerical model is established to simulate the temperature distribution inside an autoclave and it is verified by known experimental data. Then, a typical mold structure, which is covered with composites and simplified auxiliary materials, is introduced to the numerical model. Moreover, a method which combines the numerical model with the genetic algorithm is presented to optimize design parameters of the substructure of mold with an aim of improving the synchronism of curing. The maximum standard deviation of degree of cure in composite parts is adopted as the objective, while the deformation of the mold under hoisting situation is considered as the constraint. The result shows that the maximum standard deviation of degree of cure in composite parts is improved as much as 17.21%, which indicates that better synchronism of curing is achieved with the presented method.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Injection Molding Process and Properties · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Fluid Power and Mechatronic System, School of Mechanical Engineering, Zhejiang University, Hangzhou, China

Key Laboratory of Advanced Manufacturing Technology of Zhejiang Province, School of Mechanical Engineering, Zhejiang University, Hangzhou, China

References (32)

Show source-provided references
1. 10.1177/073168440809387610.1177/0731684408093876 ↗
2. 10.1016/j.compstruct.2015.03.03410.1016/j.compstruct.2015.03.034 ↗
3. 10.1002/app.1980.07025030510.1002/app.1980.070250305 ↗
4. 10.1163/15685510332232037410.1163/156855103322320374 ↗
5. 10.3144/expresspolymlett.2009.6710.3144/expresspolymlett.2009.67 ↗
6. 10.1177/002199831142961810.1177/0021998311429618 ↗
7. 10.1016/S0263-8223(99)00080-X10.1016/S0263-8223(99)00080-X ↗
8. 10.1016/j.compositesa.2016.11.01410.1016/j.compositesa.2016.11.014 ↗
9. 10.1177/00219983870210050210.1177/002199838702100502 ↗
10. 10.1016/0010-4361(95)96808-J10.1016/0010-4361(95)96808-J ↗
11. 10.1016/0010-4361(92)90186-X10.1016/0010-4361(92)90186-X ↗
12. 10.1177/00219983830170020410.1177/002199838301700204 ↗
13. 10.1177/00219983820160050510.1177/002199838201600505 ↗
14. 10.1016/0735-1933(94)90032-910.1016/0735-1933(94)90032-9 ↗
15. 10.1177/00219983980320070110.1177/002199839803200701 ↗
16. 10.1016/S0263-8223(03)00083-710.1016/S0263-8223(03)00083-7 ↗
17. 10.1002/aic.1022410.1002/aic.10224 ↗
18. Telikicherla MK · ASME-PUBLICATIONS-HTD · 1994 · 289 · 213
19. 10.1177/073168441664133310.1177/0731684416641333 ↗
20. 10.1016/0956-7143(91)90145-710.1016/0956-7143(91)90145-7 ↗
21. Johnston A · Des Manuf Compos · 1998 · 15 · 1
22. Slesinger N, Shimizu T, Arafath ARA, et al. Hear transfer coefficient distribution inside an autoclave. In: 17th international conference on composite material ICCM , Edinburgh, 27–31 July 2009.
23. Ghariban N, Haji-Sheikh A and Lou D. Heat transfer in autoclaves. In: Proc XXII Int Symp on Manufacturing and Materials Processing , ICHMT, Dubrovnik, August 1990. pp.833–848.
24. Hudek M. Examination of heat transfer during autoclave processing of polymer composites . Master’s Thesis, University of Manitoba, Canada, 2001.
25. 10.1016/j.compositesa.2016.05.03610.1016/j.compositesa.2016.05.036 ↗
26. 10.1177/073168441562476810.1177/0731684415624768 ↗
27. 10.1007/s10443-012-9265-810.1007/s10443-012-9265-8 ↗
28. Johnston A. An integrated model of the development of process-induced deformations in autoclave processing of composite structures . PhD Thesis, University of British Columbia, Vancouver, 1997.
29. Xie G, Lui J and Zhang W. Simulation and thermal analysis on temperature fields during composite curing process in autoclave technology. In: ASME 2012 international mechanical engineering congress and exposition , vol. 7. Houston, TX: ASME.10.1115/IMECE2012-85918 ↗
30. 10.1177/00219983820160060510.1177/002199838201600605 ↗
31. 10.1177/00219983920260050210.1177/002199839202600502 ↗
32. Aernnova Engineering, 2017, www.aernnova.com/wp-content/uploads/2014/10/Fotos-Utillaje-compuesto-456x193.jpg (accessed 14 June 17).