journal article·2020-10

Ranking of Al-CSA composite by MCDM approach using AHP–TOPSIS and MOORA methods

Siva S Raju, Gunji B Murali, Prabina K Patnaik

Publisher page

Abstract

A systematic and efficient approach for the selection of material is necessary to choose a best alternative for the structure or component under consideration. The multi-criteria decision making (MCDM) approaches are well suited to deal intricacy in judgment of material assortment. In this paper, integrated MCDM approaches like analytical hierarchy process (AHP)–technique for order preference by the resemblance to an ideal solution (TOPSIS) and AHP–multi-objective optimization on the basis of ratio analysis (MOORA) methods are used to rank aluminum-coconut shell ash (CSA) composites. The weightage for each criterion is calculated by AHP method and utilized in the TOPSIS and MOORA approaches to rank the materials. The target-based attributes such as density (physical property), hardness, tensile strength, toughness (mechanical properties), wear rate, and coefficient of friction (tribological properties) of the prepared composites are considered in the selection of criteria process. The composites are fabricated using stir-casting process by varying the volume fraction (5, 10, 15, and 20%) of CSA incorporated with Al-1100 matrix. A detailed study on the MCDM approaches revealed that Al-15% CSA composite emerged as the best material followed by Al-10% CSA composite among all, whereas the base matrix is found as the poor performed material in this study.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Material Selection and Properties · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Aditya Institute of Technology and Management, India

Department of Mechanical Engineering, Vellore Institute of Technology, India

Department of Mechanical Engineering, GIET University, India

References (40)

Show source-provided references
1. 10.1002/0471465186.ch610.1002/0471465186.ch6 ↗
2. Rohatgi PK · Mater Matters · 2007 · 2 · 1
3. 10.14429/dsj.43.433610.14429/dsj.43.4336 ↗
4. 10.1016/j.matdes.2014.06.05410.1016/j.matdes.2014.06.054 ↗
5. 10.1016/j.matdes.2014.04.01610.1016/j.matdes.2014.04.016 ↗
6. 10.1016/j.jmatprotec.2006.10.02110.1016/j.jmatprotec.2006.10.021 ↗
7. 10.4236/jmmce.2011.10100510.4236/jmmce.2011.101005 ↗
8. 10.1177/073168441557487010.1177/0731684415574870 ↗
9. 10.1177/073168440809345110.1177/0731684408093451 ↗
10. 10.1177/073168441244432510.1177/0731684412444325 ↗
11. 10.1177/073168441351639310.1177/0731684413516393 ↗
12. 10.1016/S1000-9361(08)60177-610.1016/S1000-9361(08)60177-6 ↗
13. 10.1016/j.eswa.2013.10.02810.1016/j.eswa.2013.10.028 ↗
14. 10.1080/02726351.2014.95364810.1080/02726351.2014.953648 ↗
15. 10.1007/s00170-006-0752-710.1007/s00170-006-0752-7 ↗
16. 10.1007/s11771-010-0038-y10.1007/s11771-010-0038-y ↗
17. 10.1016/j.mspro.2014.07.07310.1016/j.mspro.2014.07.073 ↗
18. Mardani A · Econ Res Istraživanja · 2015 · 28 · 51610.1080/1331677X.2015.1075139 ↗
19. 10.1016/j.matdes.2008.04.01910.1016/j.matdes.2008.04.019 ↗
20. 10.1016/j.matdes.2014.01.05910.1016/j.matdes.2014.01.059 ↗
21. 10.1002/pc.2490710.1002/pc.24907 ↗
22. 10.1007/s00170-011-3293-710.1007/s00170-011-3293-7 ↗
23. 10.1016/j.matdes.2012.01.01310.1016/j.matdes.2012.01.013 ↗
24. 10.1007/s10845-014-0986-410.1007/s10845-014-0986-4 ↗
25. Madić M · J Eng Sci Technol · 2015 · 10 · 1441
26. 10.1016/j.eswa.2015.07.06110.1016/j.eswa.2015.07.061 ↗
27. 10.1243/09544054JEM123810.1243/09544054JEM1238 ↗
28. Banwet DK and Majumdar A. Comparative analysis of AHP–TOPSIS and GA–TOPSIS methods for selection of raw materials in textile industries. In: International conference on industrial engineering and operations management , Bali, Indonesia, 7–9 January 2014, pp.2071–2080.
29. 10.1016/j.matdes.2015.08.08710.1016/j.matdes.2015.08.087 ↗
30. Kecek G · Res Hum Soc Sci · 2016 · 6 · 1
31. Petrović G · Facta Univ Ser Mech Eng · 2019 · 17 · 455
32. 10.1504/IJMATEI.2018.09381210.1504/IJMATEI.2018.093812 ↗
33. 10.1088/1757-899X/314/1/01200910.1088/1757-899X/314/1/012009 ↗
34. 10.1016/j.triboint.2018.08.01110.1016/j.triboint.2018.08.011 ↗
35. 10.1007/s11661-017-4139-110.1007/s11661-017-4139-1 ↗
36. 10.1177/073168441455601210.1177/0731684414556012 ↗
37. Siva Sankara Raju R · 2019 · 381
38. 10.1016/j.measurement.2019.04.00410.1016/j.measurement.2019.04.004 ↗
39. Kundakci N · J Oper Res Stat Econ Manag Inf Syst · 2016 · 4 · 17
40. 10.24874/ti.2017.39.03.1210.24874/ti.2017.39.03.12 ↗