A Fatigue Damage Model for (0/90) FRP Composites based on Stiffness Degradation of 0° and 90° Composite Plies
Source abstract
Abstract
The present study develops a stiffness reduction based model to characterize fatigue damage in unidirectional 0° and 90° plies and (0°/90°) laminates of fiber-reinforced polymer (FRP) composites. The proposed damage model has been developed, based on (i) cracking mechanism and damage progress in matrix (Region I), matrix-fiber interface (Region II) and fiber (Region III) and (ii) corresponding stiffness reduction of unidirectional composite laminates as the number of cycles progresses. Fatigue damage of (0/90)°composite systems was obtained by integrating damage values and occurred in composite plies of 0 and 90° under fatigue cycles. The predicted fatigue damage results based on the proposed damage model were found to be in good agreement for both unidirectional and (0/90) FRP composites, as they were compared with experimental data for these materials, tested at various cyclic stress levels, stress ratios, and off-axis angles reported in the literature.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Industrial Engineering, Ryerson University 350 Victoria Street, Toronto, Ontario M5B 2K3, Canada,
Department of Mechanical and Industrial Engineering, Ryerson University 350 Victoria Street, Toronto, Ontario M5B 2K3, Canada
References (32)
Show source-provided references
1. Highsmith, A. · American Society for Testing and Materials · 1982 · 103
2. Philippidis, T.P. · Science and Technology · 2000 · 60 · 2819
3. 10.1016/0025-5416(80)90190-110.1016/0025-5416(80)90190-1 ↗
4. 10.1016/0010-4361(79)90349-510.1016/0010-4361(79)90349-5 ↗
5. 10.1016/S0266-3538(01)00139-710.1016/S0266-3538(01)00139-7 ↗
6. Andersen, S.I.
7. 10.1007/BF0036783510.1007/BF00367835 ↗
8. 10.1515/SECM.2007.14.3.19710.1515/SECM.2007.14.3.197 ↗
9. Haftchenari, H. and Varvani-Farahani, A. (2003). Microcracking Response of CFRP Composites at Different Temperatures, International Conference on Fatigue Damage of Materials: Experiment and Analysis, Varvani-Farahani, A. and Brebbia, C. (eds), Toronto, Canada, pp. 389—398.
10. Reifsnider, K. L. · 1991
11. Reifsnider, K.L. · Composite Materials · 1990 · 4 · 11
12. 10.1016/S0266-3538(99)00100-110.1016/S0266-3538(99)00100-1 ↗
13. 10.1177/002199830606016910.1177/0021998306060169 ↗
14. Ellyin, F. · Composite Structures, · 1994 · 25 · 917
15. Mandell, J.F. and Meier, Usr. (1982). Effect of Stress Ratio, Frequency and Loading Time on the Tensile Fatigue of Glass-reinforced Epoxy , ASTM STP 813, pp. 55—77.10.1520/STP31816S ↗
16. 10.1016/S1359-835X(03)00052-610.1016/S1359-835X(03)00052-6 ↗
17. 10.1016/0142-1123(95)99735-S10.1016/0142-1123(95)99735-S ↗
18. 10.1023/A:100468422876510.1023/A:1004684228765 ↗
19. 10.1016/S0266-3538(96)00115-710.1016/S0266-3538(96)00115-7 ↗
20. 10.1016/S0142-1123(02)00118-410.1016/S0142-1123(02)00118-4 ↗
21. Daniel, I.M.
22. Corum, J.M. · 2000
23. 10.1177/00219983890230070610.1177/002199838902300706 ↗
24. 10.1016/S0266-3538(01)00068-910.1016/S0266-3538(01)00068-9 ↗
25. 10.1023/A:102376252836210.1023/A:1023762528362 ↗
26. 10.1007/BF0013368210.1007/BF00133682 ↗
27. Reifsnider, K.L. (1990). Damage and Damage Mechanics , In Fatigue of Composite Materials, Composite Materials, K. L. Reifsnider (ed.), Series ed R. B. Pipes, Elsevier and Science Publishers, pp. 11—77.10.1016/B978-0-444-70507-5.50006-8 ↗
28. 10.1016/0142-1123(82)90001-910.1016/0142-1123(82)90001-9 ↗
29. Shirazi, A. · 2006
30. Panbechi, M. · 2005
31. 10.1016/S1359-835X(97)00089-410.1016/S1359-835X(97)00089-4 ↗
32. 10.1016/S0142-1123(01)00068-810.1016/S0142-1123(01)00068-8 ↗