journal article·2012-09

Polypropylene/glass fiber/nanoclay hybrid composites: morphological, thermal, dynamic mechanical and impact behaviors

Normasmira A Rahman, Aziz Hassan, R Yahya, RA Lafia-Araga, PR Hornsby

Publisher page

Abstract

Polypropylene/E-glass fiber/nanoclay were compounded with a twin-screw extruder and injection molded. Thermal, dynamic mechanical, and impact tests were carried out. Differential scanning calorimetry investigations showed that the incorporation of nanoclay into polypropylene/glass fiber composite shifted the melting temperature ( T m ) to higher values. The degree of crystallinity ( X c ) was strongly influenced by the presence of the glass fiber and nanoclay in the matrix. Dynamic mechanical analysis showed an increase in storage modulus ( E′); indicating higher stiffness of the hybrid composites when compared to the glass fiber composites and the virgin matrix. From the tan δ curves, a strong influence of glass fiber and nanoclay content on the magnitude of tan δ max value was observed. Impact test showed a reduction in the critical strain energy release rate, G c for hybrid composites with higher nanoclay loading. The stress intensity factor, K c values showed insignificant effect with the presence of nanoclay and GF.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Natural Fiber Reinforced Composites · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Chemistry, University of Malaya, Kuala Lumpur, Malaysia

Department of Chemistry, Federal University of Technology, Minna, Nigeria

School of Mechanical and Aerospace Engineering, Queen’s University Belfast, Belfast, United Kingdom

References (31)

Show source-provided references
1. 10.1016/j.msea.2005.05.06510.1016/j.msea.2005.05.065 ↗
2. 10.1177/073168441141791610.1177/0731684411417916 ↗
3. 10.1002/masy.1999143011510.1002/masy.19991430115 ↗
4. 10.1016/j.compscitech.2005.09.01210.1016/j.compscitech.2005.09.012 ↗
5. 10.1016/j.compscitech.2004.07.01010.1016/j.compscitech.2004.07.010 ↗
6. 10.1177/073168441039150910.1177/0731684410391509 ↗
7. 10.1016/j.compscitech.2005.02.00610.1016/j.compscitech.2005.02.006 ↗
8. 10.1177/073168441143572710.1177/0731684411435727 ↗
9. 10.1016/j.polymer.2005.08.00310.1016/j.polymer.2005.08.003 ↗
10. Cui YH · J Vinyl Add Techn · 2010 · 16 · 18910.1002/vnl.20231 ↗
11. 10.1002/apmc.1984.05126010610.1002/apmc.1984.051260106 ↗
12. 10.1016/0032-3861(88)90134-610.1016/0032-3861(88)90134-6 ↗
13. 10.1016/j.msea.2004.09.04410.1016/j.msea.2004.09.044 ↗
14. ASTM Standard D-638:2003. Standard test method for tensile properties of plastics. West Coshoshocken, PA: ASTM International. DOI 10.1520/D0638-03, www.astm.org.
15. ASTM Standard E23-07ae1:2007. Standard test method for notched bar impact testing of metallic materials. West Coshoshocken, PA: ASTM International. www.astm.org.
16. 10.1177/089270570707960410.1177/0892705707079604 ↗
17. Sichina WJ
18. 10.1177/073168440809345110.1177/0731684408093451 ↗
19. 10.1016/j.polymdegradstab.2005.05.01810.1016/j.polymdegradstab.2005.05.018 ↗
20. 10.1002/app.2259010.1002/app.22590 ↗
21. 10.1016/S0032-3861(03)00344-610.1016/S0032-3861(03)00344-6 ↗
22. 10.1177/073168441143391310.1177/0731684411433913 ↗
23. 10.1002/(SICI)1097-4628(19990228)71:9<1505::AID-APP15>3.0.CO;2-110.1002/(SICI)1097-4628(19990228)71:9<1505::AID-APP15>3.0.CO;2-1 ↗
24. 10.1016/j.compscitech.2007.03.02110.1016/j.compscitech.2007.03.021 ↗
25. 10.1177/089270570201500445710.1177/0892705702015004457 ↗
26. 10.1177/073168440933763210.1177/0731684409337632 ↗
27. 10.1177/073168441141222610.1177/0731684411412226 ↗
28. 10.1016/S0142-9418(02)00068-510.1016/S0142-9418(02)00068-5 ↗
29. 10.1016/0266-3538(93)90144-610.1016/0266-3538(93)90144-6 ↗
30. 10.1016/j.polymer.2003.09.00610.1016/j.polymer.2003.09.006 ↗
31. 10.1002/pen.1110510.1002/pen.11105 ↗