Mechanical and tribological behaviors of UHMWPE composites filled with basalt fibers
Source abstract
Abstract
In this article, the basalt fibers were used to fill the UHMWPE because of their outstanding mechanical and tribological performances. The UHMWPE composites with the filler content of 5—20 wt.% were prepared. Then, the mechanical and tribological performances of the composites were tested. Also, the wear mechanism was analyzed. The results indicated that the UHMWPE composites’ impact toughness was decreased when filled with the basalt fibers, but the strength, hardness, and anti-indentation creep of the UHMWPE composites were improved. Under the same experimental conditions, the friction coefficient of the UHMWPE composites filled with basalt fibers was decreased to some extent, and the wear loss of the composites was significantly reduced. The analysis showed that the wear type of the UHMWPE composites was changed when filled with the basalt fibers. So, the wear-resistant performance of the UHMWPE composites was effectively enhanced.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Orthopaedic implants and arthroplasty · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, China University of Mining and Technology, China
School of Materials Science and Engineering, China University of Mining and Technology, China,
School of Materials Science and Engineering, China University of Mining and Technology, China, School of Mechanical and Electrical Engineering, China University of Mining and Technology, China
References (25)
Show source-provided references
1. Guo JM · Plastics · 2005 · 34 · 2426
2. Zoo YS · Tribol Lett · 2004 · 16 · 305309
3. 10.1016/0043-1648(93)90259-O10.1016/0043-1648(93)90259-O ↗
4. 10.1016/S0301-679X(98)00005-X10.1016/S0301-679X(98)00005-X ↗
5. Hashmi SAR · Tribol Lett · 2006 · 21 · 7987
6. Wang A. · Wear · 1995 · 183 · 241249
7. 10.1016/j.compositesa.2005.05.02310.1016/j.compositesa.2005.05.023 ↗
8. 10.1016/S0043-1648(00)00522-610.1016/S0043-1648(00)00522-6 ↗
9. 10.1002/pen.1132210.1002/pen.11322 ↗
10. 10.1016/j.proeng.2009.06.01810.1016/j.proeng.2009.06.018 ↗
11. Yuan JX · New Chem Mater · 2003 · 31 · 1921
12. Ren LQ · Tribology · 1997 · 17 · 334339
13. Wang YP · Compos Sci Technol · 2005 · 65 · 793797
14. 10.1016/0043-1648(94)90126-010.1016/0043-1648(94)90126-0 ↗
15. Lei Y. · Chem Ind Eng Prog · 2004 · 23 · 727730
16. 10.1016/S0043-1648(03)00221-710.1016/S0043-1648(03)00221-7 ↗
17. Zhao SH · Mater Mech Eng · 2010 · 34 · 5255
18. Xie EG · Fibercompos · 2003 · 3 · 1720
19. Wei B. · Mater Sci Eng A · 2010 · 527 · 47084715
20. Yan QY · Int J Thermophys · 2001 · 22 · 9951015
21. 10.1016/j.wear.2008.11.02810.1016/j.wear.2008.11.028 ↗
22. Su RJ · Plast Technol · 2010 · 38 · 9397
23. Ni ZF · Plast Technol · 2009 · 37 · 7678
24. Wang SB · J Mech Strength · 2007 · 29 · 579583
25. 10.1557/JMR.1993.083010.1557/JMR.1993.0830 ↗